PDS_VERSION_ID                   = 3
RECORD_TYPE                      = STREAM
RELEASE_ID                       = 0001
REVISION_ID                      = 0000
OBJECT                           = TEXT
  PUBLICATION_DATE               = 2004-09-29
  NOTE                           = "Description of the Housekeeping
                                     parameters"
END_OBJECT                       = TEXT
END

The Housekeeping parameters of OMEGA are embedded in specific TM packets
(Housekeeping packets). Their updated values are indicated in 6 side planes
of the OMEGA level 1B data cubes

All temperatures are in mK, all voltages in mV, all currents in mA

1st side plane: scanning mirror position (in Data Numbers coming out of the scanner monitoring device)

2nd side plane: information on the time at the beginning of the scan, in the following order:
    UT time: 7 values (year, month, day, hour, minute, second, millisecond)
    On-Board time: 2 values (seconds, milliseconds)
    SCET time:  4 values (2 for seconds, 2 for microseconds)

3rd side plane: selected temperatures 
     Temperature detector block C	 " SOA 5 "
     Temperature detector block L    " SOA 6 "
     Temperature spectro C1		 " SOA 1 "
     Temperature spectro C2          " SOA 2 "
     Temperature spectro L1		 " SOA 3 "
     Temperature spectro L2          " SOA 4 "
     Temperature slit		  	 " SOA 8 "
     Temperature detector C  		 " SES 6 "  (raw data)
     Temperature detector L 		 " SES 14 " (raw data)

4th side plane: electronics and cooler temperatures
     Temperature spectro structure	 " SOA 9 "
     Temperature 190 K interface	 " SOA 10 "
     Temperature detector L (HR)	 " SOA 11 "
     Temperature SEP module		 " SEP 1 "
     Temperature electronics 1	 " SEA 3 "     
     Temperature electronics 2       " SEA 4 "
     Temperature calibration source	 " SOA 7 "
     Temperature 280 K      		 "  PF 1 "
     Temperature SKA motor C 		 " SKA 1 "
     Temperature SKA motor L 		 " SKA 2 "
     Temperature SKC C 			 " SKC 1 "
     Temperature SKC L 			 " SKC 2 "
     Temperature SES C			 " SES 5 "
     Temperature SES L			 " SES 13 "
     Temperature SES			 " SES 17 "

5th side plane: scanner, voltages, currents, status
     Temperature FOA			 " FEA 1 "
     Temperature FEA			 " FEA 2 "
      +12 V FEA		             " SEP 2 "
     Voltage + 5V PF                 " SEA 5 "
     Voltage +15V PF                 " SEA 6 "
     Voltage -15V PF			 " SEA 7 "
     Status on-off			 " SEA 9 "
     Voltage motor C			 " SKA 3 "
     Current motor C			 " SKA 4 "
     Voltage motor L			 " SKA 5 "
     Current motor L			 " SKA 6 "
     Voltage setting C			 " SKA 7 "
     Voltage setting L		 	 " SKA 8 "
     Status 				 " SEA 10 " 
     Current (calibration source)    " SEA 1 "  
     Voltage (calibration source     " SEA 2 "

6th " Side Plane " SES voltages 
     VGL1 C				       " SES 1 "
     PHIP LB C				 " SES 2 " 
     Polarization diode C		 " SES 3 "
     Video offset C			 " SES 4 "
     24 Volts C				 " SES 7 "
     constant offset C			 " SES 8 "
     VGL1 L				       " SES 9 "
     PHIP LB L			  	 " SES 10 "
     Polarization diode L		 " SES 11 "
     Video offset L			 " SES 12 "
     24 Volts L				 " SES 15 "
     constant offset			 " SES 16 "

7th " side plane ": VEA subsystem (visible channel)
    Setting 15 volts			 " VEA 2 "
    Setting -15 volts			 " VEA 3 "
    Setting 5 volts			 " VEA 1 "
    Setting -5 volts			 " VEA 4 "
    Temperature CCD			 " VEA 7 "
    Temperature optics			 " VEA 6 "
    Température electronics VEA	 " VEA 5 "
    Current (calibration source)	 " VEA 8 "
    Status calibration + test		 " VEA 10 "
    Operation mode			 " VEA 11 "
    Frame number			       " VEA 12 "
    Command Echo 1			 " VEA 13 "
    Command Echo 2			 " VEA 14 "