OBJECT              = COLUMN
    NAME            = "UTC"
    DATA_TYPE       = TIME
    START_BYTE      = 1
    BYTES           = 23
    DESCRIPTION     = "Measurement start time (UTC in PDS standard
                       format YYYY-MM-DDThh:mm:ss.sss)"
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "SESAME_LOCAL_TIME"
    DATA_TYPE       = ASCII_INTEGER
    START_BYTE      = 25
    BYTES           = 15
    FORMAT          = "I15"
    DESCRIPTION     = "Measurement start time. SESAME local time
                      (SLT) runs with a resolution of 1/32 seconds.
                      SLT represents the least significant 32 bits
                      of LOBT. The most significant 5 bits are in
                      CDMS RSST (see SESAME Ready Message)"
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CASSE_UFPG"          
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 41
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "VOLT"
    MISSING_CONSTANT = 9999.99
    DESCRIPTION     = "CASSE FPGA 3.3V "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "DIM_UD_+5"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 49
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "VOLT"
    MISSING_CONSTANT = 9999.99
    DESCRIPTION     = "DIM +5V voltage "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "DIM_UD_-5"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 57
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "VOLT"
    MISSING_CONSTANT = 9999.99
    DESCRIPTION     = "DIM -5V voltage "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "PP_UP_+5"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 65
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "VOLT"
    MISSING_CONSTANT = 999.999
    DESCRIPTION     = "PP +5V voltage "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_U+5"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 73
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "VOLT"
    DESCRIPTION     = "Common electronics +5V voltage "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_U-5"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 81
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "VOLT"
    DESCRIPTION     = "Common electronics -5V voltage"
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_U+12"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 89
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "VOLT"
    DESCRIPTION     = "Common electronics +12V voltage "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_U-12"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 97
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "VOLT"
    DESCRIPTION     = "Common electronics -12V voltage "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_U+28"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 105
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "VOLT"
    DESCRIPTION     = "Common electronics +28V voltage"
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_UCDP"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 113
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "VOLT"
    DESCRIPTION     = "Common electronics 
                       Common DPU +5V voltage"
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CASSE_URAD_1S"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 121
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "VOLT"
    MISSING_CONSTANT = 9999.99
    DESCRIPTION     = "CASSE total dose (RADFET) "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_I+5"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 129
    BYTES           = 7
    FORMAT          = "F7.1"
    UNIT            = "MILLIAMPERE"
    DESCRIPTION     = "Common electronics +5V current "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_I-5"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 137
    BYTES           = 7
    FORMAT          = "F7.1"
    UNIT            = "MILLIAMPERE"
    DESCRIPTION     = "Common electronics -5V current "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_I+12"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 145
    BYTES           = 7
    FORMAT          = "F7.1"
    UNIT            = "MILLIAMPERE"
    DESCRIPTION     = "Common electronics +12V current "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_I-12"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 153
    BYTES           = 7
    FORMAT          = "F7.1"
    UNIT            = "MILLIAMPERE"
    DESCRIPTION     = "Common electronics -12V current "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_I+28"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 161
    BYTES           = 7
    FORMAT          = "F7.1"
    UNIT            = "MILLIAMPERE"
    DESCRIPTION     = "Common electronics +28V current "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_CEID"
    DATA_TYPE       = CHARACTER
    START_BYTE      = 170
    BYTES           = 4
    FORMAT          = "A4"
    UNIT            = "N/A"
    DESCRIPTION     = "Common electronics 
                       SESAME ID (hex value: ex B5E5) "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CASSE_TPCB"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 176
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "KELVIN"
    MISSING_CONSTANT = 9999.99
    DESCRIPTION     = "CASSE board temperature "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_CLTC"
    DATA_TYPE       = CHARACTER
    START_BYTE      = 185
    BYTES           = 4
    FORMAT          = "A4"
    UNIT            = "N/A"
    MISSING_CONSTANT = "9999"
    DESCRIPTION     = "Common electronics 
                       Last received TC (hex value) "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_CBTC"
    DATA_TYPE       = CHARACTER
    START_BYTE      = 192
    BYTES           = 4
    FORMAT          = "A4"
    UNIT            = "N/A"
    MISSING_CONSTANT = "9999"
    DESCRIPTION     = "Common electronics 
                       Last but one TC (hex value) "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "SESAME_LOCAL_TIME_MEAS"
    DATA_TYPE       = CHARACTER
    START_BYTE      = 199
    BYTES           = 8
    FORMAT          = "A8"
    DESCRIPTION     = "Start time of each measurement. SESAME
                local time runs with a resolution of 31.25 ms 
                represented in hexa
                Does not exist for software version FM1"
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_U+5_2"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 209
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "VOLT"
    DESCRIPTION     = "Common electronics +5V voltage 
                     Only exists for software version FM1"
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_U-5_2"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 217
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "VOLT"
    DESCRIPTION     = "Common electronics -5V voltage
                     Only exists for software version FM1"
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CASSE_TT-Y"      
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 225
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "KELVIN"
    MISSING_CONSTANT = 9999.99
    DESCRIPTION     = "CASSE
                       Foot -Y/TRM temperature
                       The temperature range is limited by the range
                       of the ADC of the C-DPU to (-104.52, 173.55)
                       deg Celsius "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CASSE_TA-Y"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 233
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "KELVIN"
    MISSING_CONSTANT = 9999.99
    DESCRIPTION     = "CASSE
                       Foot -Y/ACC temperature
                       The temperature range is limited by the range
                       of the ADC of the C-DPU to (-104.52, 173.55)
                       deg Celsius  "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CASSE_TT+X"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 241
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "KELVIN"
    MISSING_CONSTANT = 9999.99
    DESCRIPTION     = "CASSE
                      Foot +X/TRM temperature
                      The temperature range is limited by the range
                      of the ADC of the C-DPU to (-104.52, 173.55)
                      deg Celsius  "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CASSE_TA+X"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 249
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "KELVIN"
    MISSING_CONSTANT = 9999.99
    DESCRIPTION     = "CASSE
                      Foot +X/ACC temperature
                      The temperature range is limited by the range
                      of the ADC of the C-DPU to (-104.52, 173.55)
                      deg Celsius  "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CASSE_TT+Y"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 257
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "KELVIN"
    MISSING_CONSTANT = 9999.99
    DESCRIPTION     = "CASSE
                      Foot +Y/TRM temperature
                      The temperature range is limited by the range
                      of the ADC of the C-DPU to (-104.52, 173.55)
                      deg Celsius  "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CASSE_TA+Y"
    DATA_TYPE       = ASCII_REAL
    START_BYTE      = 265
    BYTES           = 7
    FORMAT          = "F7.2"
    UNIT            = "KELVIN"
    MISSING_CONSTANT = 9999.99
    DESCRIPTION     = "CASSE
                       Foot +Y/ACC temperature
                       The temperature range is limited by the range
                       of the ADC of the C-DPU to (-104.52, 173.55)
                       deg Celsius  "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "PP_D"
    DATA_TYPE       = CHARACTER
    START_BYTE      = 274
    BYTES           = 4
    FORMAT          = "A4"
    UNIT            = "N/A"
    MISSING_CONSTANT = "9999"
    DESCRIPTION     = "PP electron density (hexa)"
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_SUPS"
    DATA_TYPE       = CHARACTER
    START_BYTE      = 281
    BYTES           = 4
    FORMAT          = "A4"
    UNIT            = "N/A"
    MISSING_CONSTANT = "9999"
    DESCRIPTION     = "Common electronics 
                      SRAM usage/power status  "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_TIBO"
    DATA_TYPE       = ASCII_INTEGER
    START_BYTE      = 287
    BYTES           = 6
    FORMAT          = "I6"
    UNIT            = "SECOND"
    MISSING_CONSTANT = 999999
    DESCRIPTION     = "Common electronics 
                      Time since boot "
END_OBJECT          = COLUMN

OBJECT              = COLUMN
    NAME            = "CE_ERRF"
    DATA_TYPE       = CHARACTER
    START_BYTE      = 295
    BYTES           = 4
    FORMAT          = "A4"
    UNIT            = "N/A"
 MISSING_CONSTANT   = "9999"
    DESCRIPTION     = "Common electronics 
                      Error flags (hexa)"
END_OBJECT          = COLUMN