/* FILE_CONTENTS           = SESAME Read Backup RAM Buffer */
/* FILE_NAME               = SESAME_RBUF.FMT */
/* REVISION_NOTE           = K. Seidensticker, version 3, 2015-11-05 */
/* REVISION_NOTE           = W. Schmidt, version 4, 2015-11-11 */

OBJECT                     = COLUMN
    NAME                   = "UTC"
    DATA_TYPE              = TIME
    START_BYTE             = 1
    BYTES                  = 23
    DESCRIPTION            = "Measurement start time (UTC in PDS standard
                              format YYYY-MM-DDThh:mm:ss.sss)"
END_OBJECT                 = COLUMN

OBJECT                     = COLUMN
    NAME                   = "SESAME_LOCAL_TIME"
    DATA_TYPE              = ASCII_INTEGER
    START_BYTE             = 25
    BYTES                  = 15
    FORMAT                 = "I15"
    DESCRIPTION            = "Start time of measurement. SESAME local time
                              (SLT) runs with a resolution of 1/32 seconds.
                              SLT represents the least significant 32 bits
                              of LOBT. The most significant 5 bits are in
                              CDMS RSST (see SESAME Ready Message)"
END_OBJECT                 = COLUMN

OBJECT                     = COLUMN
    NAME                   = "RBUF_SUBSYS"
    DATA_TYPE              = ASCII_INTEGER
    START_BYTE             = 41
    BYTES                  = 8
     DESCRIPTION            = "Unit subsystem address (echoed TC 
                              parameter, hex value 16#xxxx#)"
END_OBJECT                 = COLUMN

OBJECT                     = COLUMN
    NAME                   = "RBUF_OFFSET"
    DATA_TYPE              = ASCII_INTEGER
    START_BYTE             = 50
    BYTES                  = 8
    DESCRIPTION            = "Offset in backup RAM buffer (echoed 
                              TC parameter, hex value 16#xxxx#)"
END_OBJECT                 = COLUMN

OBJECT                     = COLUMN
    NAME                   = "RBUF_RECORD"
    DATA_TYPE              = CHARACTER
    START_BYTE             = 60
    BYTES                  = 159
    FORMAT                 = "A159"
    DESCRIPTION            = "Contents of backup RAM buffer record: 
                              64 bytes displayed as groups of 4 characters
                              (hex values) separated by blanks"
END_OBJECT                 = COLUMN