OBJECT               = COLUMN
    NAME             = "SESAME_SEQ_ID"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 1
    BYTES            = 6
    UNIT             = "N/A"
    FORMAT           = "I6"
    DESCRIPTION      = "Sequence ID in the current data file"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "MEAS_ID"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 8
    BYTES            = 6
    FORMAT           = "I6"
    UNIT             = "N/A"
    DESCRIPTION      = "Measurement ID in the current sequence"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "UTC"
    DATA_TYPE        = TIME
    START_BYTE       = 15
    BYTES            = 23
    DESCRIPTION      = "Measurement start time (UTC in PDS standard
                         format YYYY-MM-DDThh:mm:ss.sss)"
END_OBJECT   = COLUMN

OBJECT               = COLUMN
    NAME             = "SESAME_LOCAL_TIME_SEQ"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 39
    BYTES            = 15
    FORMAT           = "I15"
    DESCRIPTION       = "Start time of sequence. SESAME local time
                         (SLT) runs with a resolution of 1/32 seconds.
                         SLT represents the least significant 32 bits of
                         LOBT. The most significant 5 bits are in
                         CDMS RSST (see SESAME Ready Message)"
END_OBJECT           = COLUMN

OBJECT                = COLUMN
    NAME              = "FREQUENCY_DIVIDER"
    DATA_TYPE         = ASCII_INTEGER
    START_BYTE        = 55
    BYTES             = 3
    FORMAT            = "I3"
    UNIT              = "N/A"
    DESCRIPTION       = "Adjusted transmitter frequency register value"
 END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "FREQUENCY_INCREMENT"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 59
    BYTES            = 5
    FORMAT           = "I5"
    UNIT             = "N/A"
    DESCRIPTION      = "Adjusted sampling rate registers value"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "CHANNELS"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 65
    BYTES            = 3
    FORMAT           = "I3"
    UNIT             = "N/A"
    DESCRIPTION      = "Number of sensor channels minus one"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "ADJ_SOUND_FREQ"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 69
    BYTES            = 5
    FORMAT           = "I5"
    UNIT             = "HERTZ"
    DESCRIPTION      = "Transmitter frequency.
                        Equals zero in Listening mode"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "ADJ_SAMPLING_FREQ"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 75
    BYTES            = 10
    FORMAT           = "I10"
    UNIT             = "HERTZ"
    DESCRIPTION      = "Sampling frequency per sensor channel"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "SESAME_LOCAL_TIME"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 86
    BYTES            = 15
    FORMAT           = "I15"
    DESCRIPTION      = "Start time of measurement. SESAME local time
                        (SLT) runs with a resolution of 1/32 seconds.
                        SLT represents the least significant 32 bits of
                        LOBT. The most significant 5 bits are in
                        CDMS RSST (see SESAME Ready Message)"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "TOTAL_MEAS_LENGTH"
    DATA_TYPE        = CHARACTER
    START_BYTE       = 103
    BYTES            = 8
    FORMAT           = "A8"
    UNIT             = "N/A"
    DESCRIPTION      = "FIFO RAM address when recording stopped
                        4 bytes, hexadecimal representation"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "TEMP_FOOT-Y_TRM"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 113
    BYTES            = 5
    FORMAT           = "I5"
    UNIT             = "N/A"
    DESCRIPTION      = "Foot temperature before measurement"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "TEMP_FOOT-Y_ACC"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 119
    BYTES            = 5
    FORMAT           = "I5"
    UNIT             = "N/A"
    DESCRIPTION      = "Foot temperature before measurement"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "TEMP_FOOT+X_TRM"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 125
    BYTES            = 5
    FORMAT           = "I5"
    UNIT             = "N/A"
    DESCRIPTION      = "Foot temperature before measurement"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "TEMP_FOOT+X_ACC"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 131
    BYTES            = 5
    FORMAT           = "I5"
    UNIT             = "N/A"
    DESCRIPTION      = "Foot temperature before measurement"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "TEMP_FOOT+Y_TRM"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 137
    BYTES            = 5
    FORMAT           = "I5"
    UNIT             = "N/A"
    DESCRIPTION      = "Foot temperature before measurement"
END_OBJECT           = COLUMN

OBJECT               = COLUMN
    NAME             = "TEMP_FOOT+Y_ACC"
    DATA_TYPE        = ASCII_INTEGER
    START_BYTE       = 143
    BYTES            = 5
    FORMAT           = "I5"
    UNIT             = "N/A"
    DESCRIPTION      = "Foot temperature before measurement"
END_OBJECT           = COLUMN