OBJECT                  = COLUMN
 NAME                  = "UTC"
 DATA_TYPE   = TIME
 START_BYTE  = 1
 BYTES                 = 23
 DESCRIPTION = "Measurement start time (UTC in PDS standard
         format YYYY-MM-DDThh:mm:ss.sss)"
END_OBJECT   = COLUMN

OBJECT          = COLUMN
    NAME        = "SESAME_LOCAL_TIME"
    DATA_TYPE   = ASCII_INTEGER
    START_BYTE  = 25
    BYTES       = 15
    FORMAT      = "I15"
    DESCRIPTION = "Measurement start time. SESAME local time
                   (SLT) runs with a resolution of 1/32 seconds.
                   SLT represents the least significant 32 bits
                   of LOBT. The most significant 5 bits are in
                   CDMS RSST (see SESAME Ready Message)"
END_OBJECT      = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_U+5"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 41
    BYTES               = 5
    FORMAT              = "F5.3"
    UNIT                 = "VOLT"
    DESCRIPTION        = "Common electronics +5V voltage "
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_U-5"
    DATA_TYPE          = ASCII_REAL
    START_BYTE  = 47
    BYTES               = 6
    FORMAT              = "F6.3"
    UNIT                 = "VOLT"
    DESCRIPTION = "Common electronics -5V voltage"
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_U+12"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 54
    BYTES               = 6
    FORMAT              = "F6.3"
    UNIT                 = "VOLT"
    DESCRIPTION = "Common electronics +12V voltage "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_U-12"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 61
    BYTES               = 7
    FORMAT    = "F7.3"
    UNIT                 = "VOLT"
    DESCRIPTION = "Common electronics -12V voltage "
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_U+28"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 69
    BYTES               = 6
    FORMAT    = "F6.3"
    UNIT                 = "VOLT"
    DESCRIPTION = "Common electronics +28V voltage"
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_UCDP"
    DATA_TYPE          = ASCII_REAL
    START_BYTE  = 76
    BYTES               = 5
    FORMAT              = "F5.3"
    UNIT                 = "VOLT"
    DESCRIPTION = "Common electronics 
                    Common DPU +5V voltage"
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_I+5"
    DATA_TYPE          = ASCII_REAL
    START_BYTE  = 82
    BYTES     = 6
    FORMAT              = "F6.2"
    UNIT                 = "MILLIAMPERE"
    DESCRIPTION = "Common electronics +5V current "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_I-5"
    DATA_TYPE          = ASCII_REAL
    START_BYTE  = 89
    BYTES               = 6
    FORMAT              = "F6.2"
    UNIT                 = "MILLIAMPERE"
    DESCRIPTION = "Common electronics -5V current "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_I+12"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 96
    BYTES               = 6
    FORMAT              = "F6.2"
    UNIT                 = "MILLIAMPERE"
    DESCRIPTION = "Common electronics +12V current "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_I-12"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 103
    BYTES               = 6
    FORMAT              = "F6.2"
    UNIT                 = "MILLIAMPERE"
    DESCRIPTION = "Common electronics -12V current "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_I+28"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 110
    BYTES               = 6
    FORMAT              = "F6.2"
    UNIT                 = "MILLIAMPERE"
    DESCRIPTION = "Common electronics +28V current "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_SUPS"
    DATA_TYPE   = CHARACTER
    START_BYTE  = 118
    BYTES               = 4
    FORMAT    = "A4"
    UNIT                 = "N/A"
    DESCRIPTION = "Common electronics 
                   SRAM usage/power status (hex value) "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_TBO"
    DATA_TYPE          = ASCII_INTEGER
    START_BYTE  = 124
    BYTES               = 6
    FORMAT              = "I6"
    UNIT                 = "SECOND"
    DESCRIPTION = "Common electronics 
                   Time since boot "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_ERRF"
    DATA_TYPE   = CHARACTER
    START_BYTE  = 132
    BYTES               = 4
    FORMAT              = "A4"
    UNIT                 = "N/A"
    DESCRIPTION = "Common electronics 
                   Error flags (hex value) "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME               = "CE_CEID"
    DATA_TYPE   = CHARACTER
    START_BYTE  = 139
    BYTES               = 4
    FORMAT              = "A4"
    UNIT                 = "N/A"
    DESCRIPTION = "Common electronics 
                   SESAME ID (hex value:B5E5) "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_CLTC"
    DATA_TYPE   = CHARACTER
    START_BYTE  = 146
    BYTES               = 4
    FORMAT              = "A4"
    UNIT                 = "N/A"
    DESCRIPTION = "Common electronics 
                   Last received TC (hex value) "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CE_CBTC"
    DATA_TYPE   = CHARACTER
    START_BYTE  = 153
    BYTES               = 4
    FORMAT              = "A4"
    UNIT                 = "N/A"
    DESCRIPTION = "Common electronics 
                   Last but one TC (hex value) "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CASSE_TT-Y"      
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 159
    BYTES               = 7
    FORMAT              = "F7.2"
    UNIT                 = "KELVIN"
    DESCRIPTION = "CASSE
                   Foot -Y/TRM temperature
                   The temperature range is limited by the range
                   of the ADC of the C-DPU to (-104.52, 173.55)
                   deg Celsius "
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "CASSE_TA-Y"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 167
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    DESCRIPTION = "CASSE
                   Foot -Y/ACC temperature
                   The temperature range is limited by the range
                   of the ADC of the C-DPU to (-104.52, 173.55)
                   deg Celsius  "
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "CASSE_TT+X"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 175
    BYTES               = 7
    FORMAT    = "F7.2"
    UNIT                 = "KELVIN"
    DESCRIPTION = "CASSE
                   Foot +X/TRM temperature
                   The temperature range is limited by the range
                   of the ADC of the C-DPU to (-104.52, 173.55)
                   deg Celsius  "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CASSE_TA+X"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 183
    BYTES               = 7
    FORMAT              = "F7.2"
    UNIT                 = "KELVIN"
    DESCRIPTION = "CASSE
                   Foot +X/ACC temperature
                   The temperature range is limited by the range
                   of the ADC of the C-DPU to (-104.52, 173.55)
                   deg Celsius  "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CASSE_TT+Y"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 191
    BYTES               = 7
    FORMAT              = "F7.2"
    UNIT                 = "KELVIN"
    DESCRIPTION = "CASSE
                   Foot +Y/TRM temperature
                   The temperature range is limited by the range
                   of the ADC of the C-DPU to (-104.52, 173.55)
                   deg Celsius  "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CASSE_TA+Y"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 199
    BYTES               = 7
    FORMAT              = "F7.2"
    UNIT                 = "KELVIN"
    DESCRIPTION = "CASSE
                   Foot +Y/ACC temperature
                   The temperature range is limited by the range
                   of the ADC of the C-DPU to (-104.52, 173.55)
                   deg Celsius  "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CASSE_TPCB"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 207
    BYTES               = 7
    FORMAT              = "F7.2"
    UNIT                 = "KELVIN"
    DESCRIPTION = "CASSE board temperature "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CASSE_UFPG"          
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 215
    BYTES               = 6
    FORMAT              = "F6.3"
    UNIT                 = "VOLT"
    DESCRIPTION = "CASSE FPGA 3.3V "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "CASSE_URAD_1S"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 222
    BYTES               = 6
    FORMAT              = "F6.3"
    UNIT                 = "VOLT"
    DESCRIPTION = "CASSE total dose (RADFET) "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "DIM_UD_+5"
    DATA_TYPE          = ASCII_REAL
    START_BYTE         = 229
    BYTES               = 5
    FORMAT              = "F5.3"
    UNIT                 = "VOLT"
    DESCRIPTION = "DIM +5V voltage "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "DIM_UD_-5"
    DATA_TYPE          = ASCII_REAL
    START_BYTE  = 235
    BYTES               = 6
    FORMAT              = "F6.3"
    UNIT                 = "VOLT"
    DESCRIPTION = "DIM -5V voltage "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "PP_UP_+5"
    DATA_TYPE          = ASCII_REAL
    START_BYTE         = 242
    BYTES               = 5
    FORMAT              = "F5.3"
    UNIT                 = "VOLT"
    DESCRIPTION = "PP +5V voltage "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "PP_D"
    DATA_TYPE          = ASCII_INTEGER
    START_BYTE         = 248
    BYTES               = 5
    FORMAT              = "I5"
    UNIT                 = "N/A"
    DESCRIPTION = "PP electron density "
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "PP_IP_-5"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 254
    BYTES               = 6
    FORMAT              = "F6.3"
    UNIT                 = "MILLIAMPERE"
    DESCRIPTION = "PP  the current consumption of the PP digital
                   electronics. The difference between UP+5 and 
                   the incoming +5 V supply voltage (U+05) is the
                   voltage drop caused by the current (IP-5) through 
                   a 11.1 Ohm resistor. "
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "SESAME_LOCAL_TIME_MEAS"
    DATA_TYPE   = CHARACTER
    START_BYTE  = 262
    BYTES               = 8
    FORMAT    = "A8"
    MISSING_CONSTANT = "99999999"
    DESCRIPTION = "Start time of each measurement. SESAME
            local time runs with a resolution of 31.25 ms 
            represented in hexa value.
            Does not exist for Software Version FM1"
END_OBJECT   = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-HK_CHANNEL1"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 272
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Voltage of temperature channel using 
                regular HK measurement, for Foot -Y/TRM
                Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-I1_CHANNEL1"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 280
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Intermediate voltage measured shortly after 
            switching from temperature channel to to reference 
            channel 1, for Foot -Y/TRM 
            Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-R1_CHANNEL1"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 288
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "voltage of reference channel 1 = UCDP, 
                   for Foot -Y/TRM 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-I2_CHANNEL1"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 296
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Intermediate voltage measured shortly after 
            switching from temperature channel to to reference 
            channel 2, for Foot -Y/TRM 
            Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-R1_CHANNEL1"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 304
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "voltage of reference channel 2 = U + 28, 
                   for Foot -Y/TRM
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-HK_CHANNEL2"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 312
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Voltage of temperature channel using 
                   regular HK measurement, for Foot -Y/ACC 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-I1_CHANNEL2"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 320
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Intermediate voltage measured shortly after 
            switching from temperature channel to to reference 
            channel 1, for Foot -Y/ACC 
            Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-R1_CHANNEL2"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 328
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "voltage of reference channel 1 = UCDP, 
                   for Foot -Y/ACC 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-I2_CHANNEL2"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 336
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Intermediate voltage measured shortly after 
            switching from temperature channel to to reference 
            channel 2, for Foot -Y/ACC
            Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-R1_CHANNEL2"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 344
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "voltage of reference channel 2 = U + 28, 
                   for Foot -Y/ACC 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-HK_CHANNEL3"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 352
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Voltage of temperature channel using 
                   regular HK measurement, for Foot +X/TRM 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-I1_CHANNEL3"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 360
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Intermediate voltage measured shortly after 
            switching from temperature channel to to reference 
            channel 1, for Foot +X/TRM 
            Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-R1_CHANNEL3"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 368
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "voltage of reference channel 1 = UCDP, 
                   for Foot +X/TRM 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-I2_CHANNEL3"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 376
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Intermediate voltage measured shortly after 
            switching from temperature channel to to reference 
            channel 2, for Foot +X/TRM 
            Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-R1_CHANNEL3"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 384
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "voltage of reference channel 2 = U + 28, 
                   for Foot +X/TRM 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-HK_CHANNEL4"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 392
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Voltage of temperature channel using 
                   regular HK measurement, for Foot +X/ACC 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-I1_CHANNEL4"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 400
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Intermediate voltage measured shortly after 
            switching from temperature channel to to reference 
            channel 1, for Foot +X/ACC 
            Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-R1_CHANNEL4"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 408
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "voltage of reference channel 1 = UCDP, 
                   for Foot +X/ACC 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-I2_CHANNEL4"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 416
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Intermediate voltage measured shortly after 
            switching from temperature channel to to reference 
            channel 2, for Foot +X/ACC 
            Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-R1_CHANNEL4"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 424
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "voltage of reference channel 2 = U + 28, 
                   for Foot +X/ACC 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-HK_CHANNEL5"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 432
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Voltage of temperature channel using 
                   regular HK measurement, for Foot +Y/TRM 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-I1_CHANNEL5"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 440
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Intermediate voltage measured shortly after 
            switching from temperature channel to to reference 
            channel 1, for Foot +Y/TRM 
            Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-R1_CHANNEL5"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 448
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "voltage of reference channel 1 = UCDP, 
                   for Foot +Y/TRM 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-I2_CHANNEL5"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 456
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Intermediate voltage measured shortly after 
            switching from temperature channel to to reference 
            channel 2, for Foot +Y/TRM 
            Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-R1_CHANNEL5"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 464
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "voltage of reference channel 2 = U + 28, 
                   for Foot +Y/TRM 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-HK_CHANNEL6"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 472
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Voltage of temperature channel using 
                   regular HK measurement, for Foot +Y/ACC 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-I1_CHANNEL6"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 480
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Intermediate voltage measured shortly after 
            switching from temperature channel to to reference 
            channel 1, for Foot +Y/ACC 
            Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-R1_CHANNEL6"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 488
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "voltage of reference channel 1 = UCDP, 
                   for Foot +Y/ACC 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-I2_CHANNEL6"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 496
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Intermediate voltage measured shortly after 
            switching from temperature channel to to reference 
            channel 2, for Foot +Y/ACC 
            Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-R1_CHANNEL6"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 504
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "voltage of reference channel 2 = U + 28, 
                   for Foot +Y/ACC 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-HK_CHANNEL7"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 512
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99
    DESCRIPTION = "Voltage of temperature channel using 
      regular HK measurement, for CASSE PCB temperature
      Does not exist for Software Version FM1  "
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-I1_CHANNEL7"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 520
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Intermediate voltage measured shortly after 
      switching from temperature channel to to reference 
      channel 1, for CASSE PCB temperature 
      Does not exist for Software Version FM1 "
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-R1_CHANNEL7"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 528
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "voltage of reference channel 1 = UCDP, 
                   for CASSE PCB temperature 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-I2_CHANNEL7"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 536
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "Intermediate voltage measured shortly after 
            switching from temperature channel to to reference 
            channel 2, for CASSE PCB temperature 
            Does not exist for Software Version FM1"
END_OBJECT             = COLUMN

OBJECT                  = COLUMN
    NAME                = "T-R1_CHANNEL7"
    DATA_TYPE   = ASCII_REAL
    START_BYTE  = 544
    BYTES               = 7
    FORMAT             = "F7.2"
    UNIT                 = "KELVIN"
    MISSING_CONSTANT = 9999.99 
    DESCRIPTION = "voltage of reference channel 2 = U + 28, 
                   for CASSE PCB temperature 
                   Does not exist for Software Version FM1"
END_OBJECT             = COLUMN