/*        Contents of format file  "COSAC_ADC_MS.FMT"                   */

 /* index of the cycle, and the tag inside the cycle */
 OBJECT       = COLUMN
  NAME        = "CYCLE_INDEX"
  DATA_TYPE   = ASCII_INTEGER
  START_BYTE  = 1
  BYTES       = 5
  UNIT        = "N/A"
  DESCRIPTION = "Index of the cycle containing the ADC_MS_ID tag"
 END_OBJECT   = COLUMN

  OBJECT       = COLUMN
  NAME        = "INSIDE_CYCLE"
  DATA_TYPE   = ASCII_INTEGER
  START_BYTE  = 7
  BYTES       = 5
  UNIT        = "N/A"
  DESCRIPTION = "Index of ADC_MS_ID tag in the same cycle"
 END_OBJECT   = COLUMN
/*      ...............  MS  (16 parameters)  ......................... */


 OBJECT       = COLUMN
  NAME        = "PIPEA_M_TEMP"
  DATA_TYPE   = ASCII_REAL
  START_BYTE  = 13
  BYTES       = 8
  UNIT        = KELVIN
  FORMAT      = "F8.2"
  DESCRIPTION = "Temperature Pipe a (main)"
 END_OBJECT   = COLUMN


 OBJECT       = COLUMN
  NAME        = "PIPEB_M_TEMP"
  DATA_TYPE   = ASCII_REAL
  START_BYTE  = 22
  BYTES       = 8
  UNIT        = KELVIN
  FORMAT      = "F8.2"
  DESCRIPTION = "Temperature Pipe b (side)"
 END_OBJECT   = COLUMN

 OBJECT       = COLUMN
  NAME        = "OVEN_TEMP"
  DATA_TYPE   = ASCII_REAL
  START_BYTE  = 31
  BYTES       = 8
  UNIT        = KELVIN
  FORMAT      = "F8.2"
  DESCRIPTION = "Temperature Oven"
 END_OBJECT   = COLUMN

 OBJECT       = COLUMN
  NAME        = "MSEBOX_TEMP"
  DATA_TYPE   = ASCII_REAL
  START_BYTE  = 40
  BYTES       = 8
  UNIT        = KELVIN
  FORMAT      = "F8.2"
  DESCRIPTION = "Temperature MS-EBox"
 END_OBJECT   = COLUMN

 OBJECT       = COLUMN
  NAME        = "CALGAS_PRESSURE"
  DATA_TYPE   = ASCII_INTEGER
  START_BYTE  = 49
  BYTES       = 8
  UNIT        = "N/A"
  FORMAT      = "I8"
  DESCRIPTION = "Pressure Calibration Gas"
 END_OBJECT   = COLUMN

 OBJECT       = COLUMN
  NAME        = "TPST_POSITION"
  DATA_TYPE   = ASCII_INTEGER
  START_BYTE  = 58
  BYTES       = 8
  UNIT        = "N/A"
  FORMAT      = "I8"
  DESCRIPTION = "Position Tapping Station
                  Open >= 4500,
                  OT (Oberer Totpunkt/Top dead centre) ~ 4710,
                  UT (Unterer Totpunkt/bottom dead centre) ~ 1330)"
 END_OBJECT   = COLUMN

 OBJECT       = COLUMN
  NAME        = "EMISSION_CURRENT"
  DATA_TYPE   = ASCII_REAL
  START_BYTE  = 67
  BYTES       = 8
  UNIT        = NANOAMPERE
  FORMAT      = "F8.2"
  DESCRIPTION = "Emission current"
 END_OBJECT   = COLUMN

 OBJECT       = COLUMN
  NAME        = "MS_HV1_DET_V"
  DATA_TYPE   = ASCII_REAL
  START_BYTE  = 76
  BYTES       = 8
  UNIT        = VOLT
  FORMAT      = "F8.2"
  DESCRIPTION = "MS HV 1, U detector"
 END_OBJECT   = COLUMN

 OBJECT       = COLUMN
  NAME        = "MS_HV2_REFL2_4_V"
  DATA_TYPE   = ASCII_REAL
  START_BYTE  = 85
  BYTES       = 8
  UNIT        = VOLT
  FORMAT      = "F8.2"
  DESCRIPTION = "MS HV 2, U reflector2_4"
 END_OBJECT   = COLUMN

 OBJECT       = COLUMN
  NAME        = "MS_HV3_REFL2_V"
  DATA_TYPE   = ASCII_REAL
  START_BYTE  = 94
  BYTES       = 8
  UNIT        = VOLT
  FORMAT      = "F8.2"
  DESCRIPTION = "MS HV 3, U reflector 2"
 END_OBJECT   = COLUMN

 OBJECT       = COLUMN
  NAME        = "MS_HV4_REFL1_V"
  DATA_TYPE   = ASCII_REAL
  START_BYTE  = 103
  BYTES       = 8
  UNIT        = VOLT
  FORMAT      = "F8.2"
  DESCRIPTION = "MS HV 4, U reflector 1"
 END_OBJECT   = COLUMN

 OBJECT       = COLUMN
  NAME        = "MS_HV5_LENSE2_V"
  DATA_TYPE   = ASCII_REAL
  START_BYTE  = 112
  BYTES       = 8
  UNIT        = VOLT
  FORMAT      = "F8.2"
  DESCRIPTION = "MS HV 5, U lense 2"
 END_OBJECT   = COLUMN

 OBJECT       = COLUMN
  NAME        = "MS_HV6_LENSE1_V"
  DATA_TYPE   = ASCII_REAL
  START_BYTE  = 121
  BYTES       = 8
  UNIT        = VOLT
  FORMAT      = "F8.2"
  DESCRIPTION = "MS HV 6, U lense 1"
 END_OBJECT   = COLUMN

 OBJECT       = COLUMN
  NAME        = "MS_HV7_G3_V"
  DATA_TYPE   = ASCII_REAL
  START_BYTE  = 130
  BYTES       = 8
  UNIT        = VOLT
  FORMAT      = "F8.2"
  DESCRIPTION = "MS HV 7, U G3"
 END_OBJECT   = COLUMN