PDS_VERSION_ID = PDS3 /* FILE CHARACTERISTICS DATA ELEMENTS */ RECORD_TYPE = FIXED_LENGTH RECORD_BYTES = 1292 FILE_RECORDS = 15509 /* DATA OBJECT POINTER IDENTIFICATION ELEMENTS */ ^TABLE = ("GCMS_ALL_B_STG1.TAB",2) /* INSTRUMENT AND DETECTOR DESCRIPTIVE DATA ELEMENTS */ FILE_NAME = "GCMS_ALL_B_STG1.TAB" DATA_SET_ID = "HP-SSA-GCMS-3-FCO/DESCENT-V1.0" DATA_SET_NAME = "HUYGENS TITAN GAS CHROMATOGRAPH MASS SPEC 3 DESCENT V1.0" PRODUCT_ID = "970910CO1_GCMS_ALL_B_STG1" PRODUCT_NAME = "970910CO1_GCMS_ALL_B-STREAM_STG1" MISSION_NAME = "CASSINI-HUYGENS" INSTRUMENT_HOST_NAME = "HUYGENS PROBE" INSTRUMENT_HOST_ID = HP MISSION_PHASE_NAME = "GROUND" /* FU_GCO1 */ PRODUCT_TYPE = RDR /* EDR for RAW & RDR for Calibrated Data */ START_TIME = 1997-254T18:32:19.004 STOP_TIME = 1997-254T21:20:53.000 /* UTC e.g. 2005-01-14T00:00:00.000 */ /* or 2005-014T00:00:00.000 */ /* This value is referred to as the */ /* GCMS_GMT time and is the timestamp */ /* added to the spacecraft telemetry */ /* packet */ SPACECRAFT_CLOCK_START_COUNT = "N/A" SPACECRAFT_CLOCK_STOP_COUNT = "N/A" /* The DDB clock time is not available */ /* for all data streams extracted from */ /* the raw telemetry. The DDB time can */ /* be calculated by comparing the MET */ /* time with the T0 event time. */ NATIVE_START_TIME = -1737.484375 NATIVE_STOP_TIME = 8399.608999 /* Elapsed Time in seconds. */ /* a.k.a. Mission Elapsed Time (MET) */ /* Negative values indicate pre-T0 */ /* No data is available immediately */ /* prior to T0 so the error in these */ /* times may be 5-7 seconds. */ /* Positive values indicate post-T0 */ PRODUCT_CREATION_TIME = 2006-06-08T16:10:52 PRODUCER_ID = "GCMS_TEAM" PRODUCER_FULL_NAME = "JOHN HABERMAN" /* & Jaime Demick Montelara */ /* & Eric Raaen */ PRODUCER_INSTITUTION_NAME = "NASA GSFC" TARGET_NAME = "TITAN" /* INSTRUMENT DESCRIPTION */ INSTRUMENT_ID = "GCMS" INSTRUMENT_NAME = "GAS CHROMATOGRAPH MASS SPECTROMETER" INSTRUMENT_TYPE = "MASS SPECTROMETER" DATA_QUALITY_ID = 1 DATA_QUALITY_DESC = "1 = High Quality ... 5 = Low Quality" /* Stage 1 Data must be converted to c/s */ /* Stage 2 Data has been converted to c/s */ /* but MAY NOT be fully corrected for */ /* the counter overflow condition. This */ /* data has NOT yet been fully corrected */ /* for pulse counting system effects */ /* including pulse coincidence effects */ /* and system (electronics) effects. */ /* Stage 3 Data has been converted to c/s */ /* and fully corrected by the team using */ /* pre- and post-launch instrument */ /* calibration data. */ INSTRUMENT_MODE_ID = "FU_GCO1" /* 970910CO1 */ /* Actually: FU_GCO1 */ /* FU = Flown Unit, EU = Enigneering Unit */ /* FS or SU = Spare (Lab, Backup) Unit */ /* DESCENT indicates Entry Condition */ /* FCO indicates Flight Check Out */ /* GCO indicates Ground Check Out */ /* FCO1/GCO1 = Checkout Type 1 */ /* FCO1B/GCO1B = Checkout Type 1B */ /* FCO2/GCO2 = Checkout Type 2 */ /* e.g., FU_DESCENT = 2005-01-14 Mission */ /* DATA OBJECT DEFINITION */ OBJECT = TABLE INTERCHANGE_FORMAT = ASCII ROWS = 15509 COLUMNS = 181 ROW_BYTES = 1292 DESCRIPTION = "Binary data archive file from the SUN workstation converted to ASCII text values. The sizes of the GCMS data record boundaries DO NOT correspond with those used for data telemetry. Refer to the GCMS Instrument User's Software Manual for details." ^STRUCTURE = "GCMS_ALL_STG1.FMT" END_OBJECT = TABLE END