A dataset provided by the European Space Agency

Name RL-C-SD2-3-FSS
URL ftp://npsa01.esac.esa.int/pub/mirror/INTERNATIONAL-ROSETTA-MISSION/SD2/RL-C-SD2-3-FSS-V1.0
DOI 10.5270/esa-bxthrpt
Abstract This archive contains calibrated and telemetry data from the SD2 instrument onboard ROSETTA Lander, acquired during the FSS (First Science Sequence) phase when landed on comet CG/67P. It also contains documentation which describes the SD2 experiment. The data archived in this data set conform to the Planetary Data System (PDS) Standards, Version 3.6.
Description Data Set Overview = This data set contains the data referred to FSS Mission Phase Data Both data, scientific and housekeeping, are collected in this data set. They refers to CODMAC Level 3. Note that the Volume Checker was not used during FSS activities. The decision of not using it was based on one main concern: due to the possible presence of ice, the sample could have remained attached to the Volume Checker and, then, removed from the oven during the sample discharging operation. The fact that the Volume Checker was not used is evident from the columns associated to the Volume Checker displacement in the calibrated data, which report the number 9999.99 Processing This data set contains telemetry data (CODMAC level 1) as well as calibrated data (CODMAC level 3). Coordinate System = The geometry items SC_SUN_POSITION_VECTOR, SC_TARGET_POSITION_VECTOR and SC_TARGET_VELOCITY_VECTOR provided in the label of the data product are relative to the Earth Mean Equator and Equinox reference frame of J2000. <>_SPACECRAFT_LATITUDE, <>_SPACECRAFT_LONGITUDE are given in the PLANETOCENTRIC coordinate system. These parameters are computed at time t=START_TIME. Distances are given in km, angles in degrees.
Instrument SD2
Temporal Coverage 2014-11-14T10:43:29Z/2014-11-14T22:33:56Z
Version V1.0
Mission Description TABLE OF CONTENTS ---------------------------------- = ROSETTA Mission Overview = ROSETTA Mission Objectives - Science Objectives = Mission Profile = Mission Phases Overview - Mission Phase Schedule - Solar Conjunctions/Oppositions - Payload Checkouts = Mission Phases Description - Launch phase (LEOP) - Commissioning phase - Cruise phase 1 - Earth swing-by 1 - Cruise phase 2 (and Deep Impact) - Mars swing-by - Cruise phase 3 - Earth swing-by 2 - Cruise phase 4 (splitted in 4-1 and 4-2) - Steins flyby - Earth swing-by 3 - Cruise phase 5 - Lutetia flyby - Rendez-Vous Manouver 1 - Cruise phase 6 - Rendez-Vous Manouver 2 - Near comet drift (NCD) phase - Approach phase - Lander delivery and relay phase - Escort phase - Near perihelion phase - Extended mission = Orbiter Experiments - ALICE - CONSERT - COSIMA - GIADA - MIDAS - MIRO - OSIRIS - ROSINA - RPC - RSI - VIRTIS - SREM = LANDER (PHILAE) - Science Objectives - Lander Experiments = Ground Segment - Rosetta Ground Segment - Rosetta Science Operations Center - Rosetta Mission Operations Center - Rosetta Lander Ground Segment - Lander Control Center - Science Operations and Navigation Center - Rosetta Scientific Data Archive = Acronyms ROSETTA Mission Overview = The ROSETTA mission is an interplanetary mission whose main objectives are the rendezvous and in-situ measurements of the comet 67P/Churyumov-Gerasimenko, scheduled for 2014/2015. The spacecraft carries a Rosetta Lander, named Philae, to the nucleus and deploys it onto its surface. A brief description of the mission and its objectives can be found in [GLASSMEIERETAL2007A]. A detailed description of the mission analysis can be found in the ROSETTA User Manual [RO-DSS-MA-1001], and the flight Operations Plan [RO-ESC-PL-5000]. On its long way to the comet nucleus after a Launch by Ariane 5 P1+ in March 2004, the ROSETTA spacecraft orbited the Sun fo...
Date Published 2015-09-02T00:00:00Z
Publisher And Registrant European Space Agency
Credit Guidelines European Space Agency, 2015-09-02T00:00:00Z, RL-C-SD2-3-FSS, V1.0. https://doi.org/10.5270/esa-bxthrpt