/* "ENG_LEVEL_2_FORMAT.FMT" Rosetta/miro engineering raw data structure */ /* This structure label gives the data structure for the data decommutated */ /* from the telemetry for the engineering (housekeeping) data from the miro */ /* instrument. */ OBJECT = COLUMN NAME = TIME COLUMN_NUMBER = 1 DATA_TYPE = IEEE_REAL FORMAT = "F16.5" UNIT = SECOND START_BYTE = 1 BYTES = 8 DESCRIPTION = "Time of acquisition of the data packet in elapsed UTC seconds after 1-Jan-1970 (see EAICD Section 3.2.2)." END_OBJECT = COLUMN OBJECT = COLUMN NAME = SPECT_T1 COLUMN_NUMBER = 2 DATA_TYPE = IEEE_REAL FORMAT = "F7.3" UNIT = "DEGREE CELSIUS" START_BYTE = 9 BYTES = 4 DESCRIPTION = "CTS Temperature sensor #1 Branch A (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = SPECT_T2 COLUMN_NUMBER = 3 DATA_TYPE = IEEE_REAL FORMAT = "F7.3" UNIT = "DEGREE CELSIUS" START_BYTE = 13 BYTES = 4 DESCRIPTION = "CTS Temperature sensor #2 Branch A (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = SPECT_T3 COLUMN_NUMBER = 4 DATA_TYPE = IEEE_REAL FORMAT = "F7.3" UNIT = "DEGREE CELSIUS" START_BYTE = 17 BYTES = 4 DESCRIPTION = "CTS Temperature sensor #1 Branch B (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = SPECT_T4 COLUMN_NUMBER = 5 DATA_TYPE = IEEE_REAL FORMAT = "F7.3" UNIT = "DEGREE CELSIUS" START_BYTE = 21 BYTES = 4 DESCRIPTION = "CTS Temperature sensor #2 Branch B (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = SPECT_T5 COLUMN_NUMBER = 6 DATA_TYPE = IEEE_REAL FORMAT = "F7.3" UNIT = "DEGREE CELSIUS" START_BYTE = 25 BYTES = 4 DESCRIPTION = "CTS Temperature sensor #1 analog tray (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = SPECT_T6 COLUMN_NUMBER = 7 DATA_TYPE = IEEE_REAL FORMAT = "F7.3" UNIT = "DEGREE CELSIUS" START_BYTE = 29 BYTES = 4 DESCRIPTION = "CTS Temperature sensor #2 analog tray (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = EU_TEMP COLUMN_NUMBER = 8 DATA_TYPE = IEEE_REAL FORMAT = "F7.3" UNIT = "DEGREE CELSIUS" START_BYTE = 33 BYTES = 4 DESCRIPTION = "Electronics Unit (EU) temperature (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = ECAL_TEMP COLUMN_NUMBER = 9 DATA_TYPE = IEEE_REAL FORMAT = "F5.0" START_BYTE = 37 BYTES = 4 DESCRIPTION = "Reference temperature (634 Ohms) (Digital Units)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = POS_5V_EU COLUMN_NUMBER = 10 DATA_TYPE = IEEE_REAL FORMAT = "F5.3" UNIT = VOLT START_BYTE = 41 BYTES = 4 DESCRIPTION = "EU +5V voltage monitor (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = POS_12V_EU COLUMN_NUMBER = 11 DATA_TYPE = IEEE_REAL FORMAT = "F6.3" UNIT = VOLT START_BYTE = 45 BYTES = 4 DESCRIPTION = "EU +12V voltage monitor (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = NEG_12V_EU COLUMN_NUMBER = 12 DATA_TYPE = IEEE_REAL FORMAT = "F7.3" UNIT = VOLT START_BYTE = 49 BYTES = 4 DESCRIPTION = "EU -12V voltage monitor (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = "3V_EU" COLUMN_NUMBER = 13 DATA_TYPE = IEEE_REAL FORMAT = "F5.3" UNIT = VOLT START_BYTE = 53 BYTES = 4 DESCRIPTION = "EU +3.3V voltage monitor (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = POS_24V_EU COLUMN_NUMBER = 14 DATA_TYPE = IEEE_REAL FORMAT = "F6.3" UNIT = VOLT START_BYTE = 57 BYTES = 4 DESCRIPTION = "EU +24V voltage monitor (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = POS_5V_ANA_EU COLUMN_NUMBER = 15 DATA_TYPE = IEEE_REAL FORMAT = "F5.3" UNIT = VOLT START_BYTE = 61 BYTES = 4 DESCRIPTION = "EU +5V analog voltage monitor (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = POS_5V_CURR_EU COLUMN_NUMBER = 16 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" UNIT = AMPERE START_BYTE = 65 BYTES = 4 DESCRIPTION = "EU +5V current monitor (A)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = POS_12V_CURR_EU COLUMN_NUMBER = 17 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" UNIT = AMPERE START_BYTE = 69 BYTES = 4 DESCRIPTION = "EU +12V current monitor (A)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = NEG_12V_CURR_EU COLUMN_NUMBER = 18 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" UNIT = AMPERE START_BYTE = 73 BYTES = 4 DESCRIPTION = "EU -12V current monitor (A)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = POS_24V_ANA_CURR_EU COLUMN_NUMBER = 19 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" UNIT = AMPERE START_BYTE = 77 BYTES = 4 DESCRIPTION = "EU +24V current monitor (A)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = "3V_CURR_EU" COLUMN_NUMBER = 20 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" UNIT = AMPERE START_BYTE = 81 BYTES = 4 DESCRIPTION = "EU +3V current monitor (A)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = POS_5V_ANA_CURR_EU COLUMN_NUMBER = 21 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" UNIT = AMPERE START_BYTE = 85 BYTES = 4 DESCRIPTION = "EU +5V analog current monitor (A)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = TLM_Heating COLUMN_NUMBER = 22 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" START_BYTE = 89 BYTES = 4 DESCRIPTION = "USO temperature (uncalibrated)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = TLM_RF COLUMN_NUMBER = 23 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" START_BYTE = 93 BYTES = 4 DESCRIPTION = "USO RF Power Status (uncalibrated)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = CTS_V_ANA_1 COLUMN_NUMBER = 24 DATA_TYPE = IEEE_REAL FORMAT = "F5.3" UNIT = VOLT START_BYTE = 97 BYTES = 4 DESCRIPTION = "CTS PG1 Voltage (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = CTS_V_ANA_2 COLUMN_NUMBER = 25 DATA_TYPE = IEEE_REAL FORMAT = "F5.3" UNIT = VOLT START_BYTE = 101 BYTES = 4 DESCRIPTION = "CTS PG1 Voltage (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = COLD_LOAD1_TEMP COLUMN_NUMBER = 26 DATA_TYPE = IEEE_REAL FORMAT = "F6.1" UNIT = "DEGREE CELSIUS" START_BYTE = 105 BYTES = 4 DESCRIPTION = "Cold load temperature #1 (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = COLD_LOAD2_TEMP COLUMN_NUMBER = 27 DATA_TYPE = IEEE_REAL FORMAT = "F6.1" UNIT = "DEGREE CELSIUS" START_BYTE = 109 BYTES = 4 DESCRIPTION = "Cold load temperature #2 (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = WARM_LOAD1_TEMP COLUMN_NUMBER = 28 DATA_TYPE = IEEE_REAL FORMAT = "F5.1" UNIT = "DEGREE CELSIUS" START_BYTE = 113 BYTES = 4 DESCRIPTION = "Warm load temperature #1 (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = OB_TEMP COLUMN_NUMBER = 29 DATA_TYPE = IEEE_REAL FORMAT = "F5.1" UNIT = "DEGREE CELSIUS" START_BYTE = 117 BYTES = 4 DESCRIPTION = "Optical Bench temperature (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = TELESCOPE1_TEMP COLUMN_NUMBER = 30 DATA_TYPE = IEEE_REAL FORMAT = "F6.1" UNIT = "DEGREE CELSIUS" START_BYTE = 121 BYTES = 4 DESCRIPTION = "Telescope #1 temperature (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = TELESCOPE2_TEMP COLUMN_NUMBER = 31 DATA_TYPE = IEEE_REAL FORMAT = "F6.1" UNIT = "DEGREE CELSIUS" START_BYTE = 125 BYTES = 4 DESCRIPTION = "Telescope #2 temperature (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = PLL_TEMP COLUMN_NUMBER = 32 DATA_TYPE = IEEE_REAL FORMAT = "F5.1" UNIT = "DEGREE CELSIUS" START_BYTE = 129 BYTES = 4 DESCRIPTION = "Phase lock loop temerature (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = IFP_DET_TEMP COLUMN_NUMBER = 33 DATA_TYPE = IEEE_REAL FORMAT = "F5.1" UNIT = "DEGREE CELSIUS" START_BYTE = 133 BYTES = 4 DESCRIPTION = "smm IF processor detector temperature (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = IFP_AMP_TEMP COLUMN_NUMBER = 34 DATA_TYPE = IEEE_REAL FORMAT = "F5.1" UNIT = "DEGREE CELSIUS" START_BYTE = 137 BYTES = 4 DESCRIPTION = "smm IF processor amplifier temperature (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = SMM_LO_GUNN COLUMN_NUMBER = 35 DATA_TYPE = IEEE_REAL FORMAT = "F5.1" UNIT = "DEGREE CELSIUS" START_BYTE = 141 BYTES = 4 DESCRIPTION = "smm LO Gunn temperature (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = MM_LO_GUNN COLUMN_NUMBER = 36 DATA_TYPE = IEEE_REAL FORMAT = "F5.1" UNIT = "DEGREE CELSIUS" START_BYTE = 145 BYTES = 4 DESCRIPTION = "mm LO Gunn temperature (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = MOTOR_TEMP COLUMN_NUMBER = 37 DATA_TYPE = IEEE_REAL FORMAT = "F5.1" UNIT = "DEGREE CELSIUS" START_BYTE = 149 BYTES = 4 DESCRIPTION = "Mirror motor temperature (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = SEN_EL COLUMN_NUMBER = 38 DATA_TYPE = IEEE_REAL FORMAT = "F5.1" UNIT = "DEGREE CELSIUS" START_BYTE = 153 BYTES = 4 DESCRIPTION = "Sensor Electronics Unit (SBEU) temperature (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = WARM_LOAD2_TEMP COLUMN_NUMBER = 39 DATA_TYPE = IEEE_REAL FORMAT = "F5.1" UNIT = "DEGREE CELSIUS" START_BYTE = 157 BYTES = 4 DESCRIPTION = "Warm load temperature #2 (deg C)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = CAL_TEMP_LOW COLUMN_NUMBER = 40 DATA_TYPE = IEEE_REAL FORMAT = "F3.0" START_BYTE = 161 BYTES = 4 DESCRIPTION = "Reference temperature 191 Ohms (digital units)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = CAL_TEMP_HIGH COLUMN_NUMBER = 41 DATA_TYPE = IEEE_REAL FORMAT = "F4.0" START_BYTE = 165 BYTES = 4 DESCRIPTION = "Reference temperature 681 Ohms (digital units)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = POS_5V_SBEU COLUMN_NUMBER = 42 DATA_TYPE = IEEE_REAL FORMAT = "F5.3" UNIT = VOLT START_BYTE = 169 BYTES = 4 DESCRIPTION = "SBEU +5V voltage monitor (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = POS_12V_1_SBEU COLUMN_NUMBER = 43 DATA_TYPE = IEEE_REAL FORMAT = "F6.3" UNIT = VOLT START_BYTE = 173 BYTES = 4 DESCRIPTION = "SBEU +12V voltage monitor #1 (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = POS_12V_2_SBEU COLUMN_NUMBER = 44 DATA_TYPE = IEEE_REAL FORMAT = "F6.3" UNIT = VOLT START_BYTE = 177 BYTES = 4 DESCRIPTION = "SBEU +12V voltage monitor #2 (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = NEG_12V_SBEU COLUMN_NUMBER = 45 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" UNIT = VOLT START_BYTE = 181 BYTES = 4 DESCRIPTION = "SBEU -12V voltage monitor (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = POS_5V_CURR_SBEU COLUMN_NUMBER = 46 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" UNIT = AMPERE START_BYTE = 185 BYTES = 4 DESCRIPTION = "SBEU +5V current monitor (A)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = POS_12V_CURR_1_SBEU COLUMN_NUMBER = 47 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" UNIT = AMPERE START_BYTE = 189 BYTES = 4 DESCRIPTION = "SBEU +12V current monitor #1 (A)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = POS_12V_CURR_2_SBEU COLUMN_NUMBER = 48 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" UNIT = AMPERE START_BYTE = 193 BYTES = 4 DESCRIPTION = "SBEU +12V current monitor #2 (A)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = NEG_12V_CURR_SBEU COLUMN_NUMBER = 49 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" UNIT = AMPERE START_BYTE = 197 BYTES = 4 DESCRIPTION = "SBEU -12V current monitor (A)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = MM_GUNN_CURR COLUMN_NUMBER = 50 DATA_TYPE = IEEE_REAL FORMAT = "F6.2" UNIT = MILLIAMPERE START_BYTE = 201 BYTES = 4 DESCRIPTION = "mm LO Gunn current (mA)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = SMM_Mult_CURR COLUMN_NUMBER = 51 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" UNIT = MILLIAMPERE START_BYTE = 205 BYTES = 4 DESCRIPTION = "smm multiplier current (mA)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = SMM_PLL_ERR COLUMN_NUMBER = 52 DATA_TYPE = IEEE_REAL FORMAT = "F5.3" UNIT = VOLT START_BYTE = 209 BYTES = 4 DESCRIPTION = "static phase error for smm PLL (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = FS1_ERR COLUMN_NUMBER = 53 DATA_TYPE = IEEE_REAL FORMAT = "F5.3" UNIT = VOLT START_BYTE = 213 BYTES = 4 DESCRIPTION = "Phase error for frequency synthesizer #1 (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = FS2_ERR COLUMN_NUMBER = 54 DATA_TYPE = IEEE_REAL FORMAT = "F5.3" UNIT = VOLT START_BYTE = 217 BYTES = 4 DESCRIPTION = "Phase error for frequency synthesizer #2 (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = FS3_ERR COLUMN_NUMBER = 55 DATA_TYPE = IEEE_REAL FORMAT = "F5.3" UNIT = VOLT START_BYTE = 221 BYTES = 4 DESCRIPTION = "Phase error for frequency synthesizer #3 (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = SMM_PLL_GUNN_CURR COLUMN_NUMBER = 56 DATA_TYPE = IEEE_REAL FORMAT = "F6.2" UNIT = MILLIAMPERE START_BYTE = 225 BYTES = 4 DESCRIPTION = "smm Gunn oscillator current (via PLL) (mA)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = SMM_PLL_IF_PWR COLUMN_NUMBER = 57 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" UNIT = VOLT START_BYTE = 229 BYTES = 4 DESCRIPTION = "smm PLL IF power monitor (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = SMM_GDO_VOLTAGE COLUMN_NUMBER = 58 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" UNIT = VOLT START_BYTE = 233 BYTES = 4 DESCRIPTION = "smm GDO bias voltage (V)" END_OBJECT = COLUMN OBJECT = COLUMN NAME = SPAREF COLUMN_NUMBER = 59 DATA_TYPE = IEEE_REAL FORMAT = "E11.3" START_BYTE = 237 BYTES = 4 DESCRIPTION = "spare" END_OBJECT = COLUMN OBJECT = COLUMN NAME = MIRPOS COLUMN_NUMBER = 60 DATA_TYPE = MSB_UNSIGNED_INTEGER FORMAT = I1 START_BYTE = 241 BYTES = 1 DESCRIPTION = "Mirror position: 1: sky, 2: cold load, 3: warm load" END_OBJECT = COLUMN OBJECT = COLUMN NAME = POWERMODE COLUMN_NUMBER = 61 DATA_TYPE = MSB_UNSIGNED_INTEGER FORMAT = I1 START_BYTE = 242 BYTES = 1 DESCRIPTION = "Values 1-6 as described in MIRO User Manual 6.1.2.1.5" END_OBJECT = COLUMN OBJECT = COLUMN NAME = SUCR0 COLUMN_NUMBER = 62 DATA_TYPE = CHARACTER FORMAT = A2 START_BYTE = 243 BYTES = 2 DESCRIPTION = "Low order bits 0-15 of Sensor Unit Control Register" OBJECT = BIT_COLUMN NAME = HSKMUX START_BIT = 1 BITS = 5 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Selects housekeeping channel" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = NON5VSMM START_BIT = 6 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Commands +5V, +/-12V on after -5V is commanded using the SMM continuum mode" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = IFPCTL0 START_BIT = 7 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Bit 0 of 4 bit ifp power control setting" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = IFPCTL1 START_BIT = 8 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Bit 1 of 4 bit ifp power control setting" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = MMLNAON START_BIT = 9 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Powers on mm LNA bias 0 = on, 1 = off" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = SMMLNAON START_BIT = 10 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Powers on smm LNA bias 0 = on, 1 = off" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = NON5VMM START_BIT = 11 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Commands +5V, +/-12V on after -5V is commanded using the MM continuum mode" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = NON5VSPC START_BIT = 12 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Commands +5V, +/-12V on after -5V is commanded using CTS mode" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = PLLRESET START_BIT = 13 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Phase-lock reset (0 locks, 1 unlocks) CF User Manual V6.2-7" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = IFPCTL2 START_BIT = 14 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Bit 2 of 4 bit ifp power control setting" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = IFPCTL3 START_BIT = 15 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Bit 3 of 4 bit ifp power control setting (MSB)" END_OBJECT = BIT_COLUMN END_OBJECT = COLUMN OBJECT = COLUMN NAME = SUCR16 COLUMN_NUMBER = 63 DATA_TYPE = CHARACTER FORMAT = A2 START_BYTE = 245 BYTES = 2 DESCRIPTION = "High order bits 16-31 of Sensor Unit Control Register" OBJECT = BIT_COLUMN NAME = SMMGUNNOSCV START_BIT = 1 BITS = 4 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Setting for voltage to smm Gunn oscillator" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = MMGUNNOSCV START_BIT = 5 BITS = 4 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Setting for voltage to mm Gunn oscillator" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = NEG5VSMM START_BIT = 9 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Set -5V for smm continuum mode" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = NEG5VMM START_BIT = 10 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Set -5V for mm continuum mode" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = NEG5VCTS START_BIT = 11 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Set -5V for cts mode" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = LDFRQ START_BIT = 12 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Set and cleared to load the 3 fequency synthsizer chips" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = MIRROROFF START_BIT = 13 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "0: Mirror power on, 1: Mirror power off" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = MIRRORBACK START_BIT = 14 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "1: backward mirror motion, 0: forward mirror motion" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = SMMFRQSW START_BIT = 15 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Set LO = 0 or 1 when frequency swtiching is on" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = PINPULLER START_BIT = 16 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Set and cleared to activate mirror pin puller" END_OBJECT = BIT_COLUMN END_OBJECT = COLUMN OBJECT = COLUMN NAME = ADDR100 COLUMN_NUMBER = 64 DATA_TYPE = CHARACTER FORMAT = A2 START_BYTE = 247 BYTES = 2 DESCRIPTION = "Bits from address 100" OBJECT = BIT_COLUMN NAME = EMUX START_BIT = 1 BITS = 5 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Bits 0-5 set corresponding EMUX, 0-5" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = SND2SU START_BIT = 6 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Send command register data to Sensor Unit" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = MOTSTEP START_BIT = 7 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Enable motor stepping" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = LDENABLE START_BIT = 8 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "1: Enable load, 0: Disable load" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = POS12VSPEC START_BIT = 9 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "+12V Spectrometer on, 1: On, 0: Off" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = POS5VSPEC START_BIT = 10 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "+5V Spectrometer on, 1: On, 0: Off" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = POS5VANA START_BIT = 11 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "+5V Analog spectrometer on, 1: On, 0: Off" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = POS3VSPEC START_BIT = 12 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "+3V Spectrometer on, 1: On, 0: Off" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = NEG12VSPEC START_BIT = 13 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "-12V Spectrometer on, 1: On, 0: Off" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = USO24V START_BIT = 14 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "+24V USO on, 1: On, 0: Off" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = CALHTRON START_BIT = 15 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "Calibration Heater On, 0: Off, 1: On" END_OBJECT = BIT_COLUMN OBJECT = BIT_COLUMN NAME = CTSTRISTORE START_BIT = 16 BITS = 1 BIT_DATA_TYPE = MSB_UNSIGNED_INTEGER DESCRIPTION = "CTS Tri-state, 1: disable, 0: enable" END_OBJECT = BIT_COLUMN END_OBJECT = COLUMN