OBJECT                  = COLUMN                                              
   COLUMN_NUMBER        = 1                                                   
   NAME                 = "UTC"                                               
   DATA_TYPE            = TIME                                                
   START_BYTE           = 1                                                   
   BYTES                = 23                                                  
   UNIT                 = "N/A"                                               
   DESCRIPTION          = "This column represents the UTC at the start        
                           of the data matrix in PDS standard format          
                           YYYY-MM-DDThh:mm:ss.sss"                           
END_OBJECT              = COLUMN                                              
                                                                              
OBJECT                  = COLUMN                                              
   COLUMN_NUMBER        = 2                                                   
   NAME                 = "OBT"                                               
   DATA_TYPE            = CHARACTER                                           
   START_BYTE           = 26                                                  
   BYTES                = 19                                                  
   UNIT                 = "N/A"                                               
   DESCRIPTION          = "On board Time (OBT) is represented as :            
                           <Reset number>/<unit seconds>.<fractional seconds> 
                           with                                               
                           <Reset number>: integer starting at 1              
                              Reset number 1 starts at 2005-03-01T00:00:00 UTC
                           <unit seconds>: 10 digits number of unit seconds   
                           <fractional seconds>: 5 digits number of fractional
                              seconds expressed as multiples of 2^-16 seconds"
END_OBJECT              = COLUMN                                              
                                                                              
OBJECT                  = COLUMN                                              
   COLUMN_NUMBER        = 3                                                   
   NAME                 = "SW_VERSION"                                        
   DATA_TYPE            = ASCII_INTEGER                                       
   START_BYTE           = 47                                                  
   BYTES                = 5                                                   
   UNIT                 = "N/A"                                               
   FORMAT               = "I5"                                                
   DESCRIPTION          = "Software version"                                  
END_OBJECT              = COLUMN                                              
                                                                              
OBJECT                  = COLUMN                                              
   COLUMN_NUMBER        = 4                                                   
   NAME                 = "SECTOR_MASK"                                       
   DATA_TYPE            = CHARACTER                                           
   START_BYTE           = 54                                                  
   BYTES                = 16                                                  
   UNIT                 = "N/A"                                               
   DESCRIPTION          = "ELS Sector mask defines the active sectors that are
                           set for the measurement. The Binary format is used.
                           One bit (or character) represents the status of one
                           ELS sector and may take one of the following values
                           bit 0 (sector 0): 1 (enable), 0 (disable)          
                           bit 1 (sector 1): 1 (enable), 0 (disable)          
                           bit 2 (sector 2): 1 (enable), 0 (disable)          
                           bit 3 (sector 3): 1 (enable), 0 (disable)          
                           bit 4 (sector 4): 1 (enable), 0 (disable)          
                           bit 5 (sector 5): 1 (enable), 0 (disable)          
                           bit 6 (sector 6): 1 (enable), 0 (disable)          
                           bit 7 (sector 7): 1 (enable), 0 (disable)          
                           bit 8 (sector 8): 1 (enable), 0 (disable)          
                           bit 9 (sector 9): 1 (enable), 0 (disable)          
                           bit 10 (sector 10): 1 (enable), 0 (disable)        
                           bit 11 (sector 11): 1 (enable), 0 (disable)        
                           bit 12 (sector 12): 1 (enable), 0 (disable)        
                           bit 13 (sector 13): 1 (enable), 0 (disable)        
                           bit 14 (sector 14): 1 (enable), 0 (disable)        
                           bit 15 (sector 15): 1 (enable), 0 (disable)"       
END_OBJECT              = COLUMN                                              
                                                                              
OBJECT                  = COLUMN                                              
   COLUMN_NUMBER        = 5                                                   
   NAME                 = "TIME_COMPRESSION"                                  
   DATA_TYPE            = ASCII_INTEGER                                       
   START_BYTE           = 72                                                  
   BYTES                = 2                                                   
   UNIT                 = "N/A"                                               
   FORMAT               = "I2"                                                
   DESCRIPTION          = "Time compression.                                  
                           The field takes one of the following values:       
                           1 (sweep)                                          
                           2 (sweeps)                                         
                           4 (sweeps)                                         
                           8 (sweeps)                                         
                           16 (sweeps)                                        
                           -1 (for undefined)"                                
END_OBJECT              = COLUMN                                              
                                                                              
OBJECT                  = COLUMN                                              
   COLUMN_NUMBER        = 6                                                   
   NAME                 = "ENERGY_COMPRESSION"                                
   DATA_TYPE            = ASCII_INTEGER                                       
   START_BYTE           = 75                                                  
   BYTES                = 2                                                   
   UNIT                 = "N/A"                                               
   FORMAT               = "I2"                                                
   DESCRIPTION          = "Energy compression value indicates how many        
                           energy steps have been summed over. 128 divided    
                           by this value gives the number of energy steps.    
                           The field takes one of the following values:       
                           1 (step)                                           
                           2 (steps)                                          
                           4 (steps)                                          
                           -1 (for undefined)"                                
END_OBJECT              = COLUMN                                              
                                                                              
OBJECT                  = COLUMN                                              
   COLUMN_NUMBER        = 7                                                   
   NAME                 = "LOG_COMPRESSION"                                   
   DATA_TYPE            = ASCII_INTEGER                                       
   START_BYTE           = 78                                                  
   BYTES                = 1                                                   
   UNIT                 = "N/A"                                               
   FORMAT               = "I1"                                                
   DESCRIPTION          = "Log compression"                                   
END_OBJECT              = COLUMN                                              
                                                                              
OBJECT                  = COLUMN                                              
   COLUMN_NUMBER        = 8                                                   
   NAME                 = "RICE_COMPRESSION_FLAG"                             
   DATA_TYPE            = ASCII_INTEGER                                       
   START_BYTE           = 80                                                  
   BYTES                = 1                                                   
   UNIT                 = "N/A"                                               
   FORMAT               = "I1"                                                
   DESCRIPTION          = "Rice compression flag status.                      
                           The field takes one of the following values:       
                           0 = non valid                                      
                           1 = valid"                                         
END_OBJECT              = COLUMN                                              
                                                                              
OBJECT                  = COLUMN                                              
   COLUMN_NUMBER        = 9                                                   
   NAME                 = "RICE_COMPRESSION_VALUE"                            
   DATA_TYPE            = ASCII_INTEGER                                       
   START_BYTE           = 82                                                  
   BYTES                = 1                                                   
   UNIT                 = "N/A"                                               
   FORMAT               = "I1"                                                
   DESCRIPTION          = "Rice compression"                                  
END_OBJECT              = COLUMN                                              
                                                                              
OBJECT                  = COLUMN                                              
   COLUMN_NUMBER        = 10                                                  
   NAME                 = "SCANNER_DIRECTION"                                 
   DATA_TYPE            = ASCII_INTEGER                                       
   START_BYTE           = 84                                                  
   BYTES                = 1                                                   
   UNIT                 = "N/A"                                               
   FORMAT               = "I1"                                                
   DESCRIPTION          = "Scanner direction.                                 
                           The field takes one of the following values:       
                           0: 0 - 180                                         
                           1: 180 - 0"                                        
END_OBJECT              = COLUMN                                              
                                                                              
OBJECT                  = COLUMN                                              
   COLUMN_NUMBER        = 11                                                  
   NAME                 = "SCANNER_SPEED"                                     
   DATA_TYPE            = ASCII_INTEGER                                       
   START_BYTE           = 86                                                  
   BYTES                = 3                                                   
   UNIT                 = SECOND                                              
   FORMAT               = "I3"                                                
   DESCRIPTION          = "Scanner speed.                                     
                           This is not the actual moving speed at the         
                           specified time, but a setting speed value that is  
                           applied in operation to the scanner once a command 
                           is sent to move it.                                
                           The field takes one of the following values:       
                           0 (standing)                                       
                           32 (seconds scan)                                  
                           64 (seconds scan)                                  
                           128 (seconds scan)"                                
END_OBJECT              = COLUMN                                              
                                                                              
OBJECT                  = COLUMN                                              
   COLUMN_NUMBER        = 12                                                  
   NAME                 = "SCANNER_POSITION"                                  
   DATA_TYPE            = ASCII_REAL                                          
   START_BYTE           = 90                                                  
   BYTES                = 5                                                   
   UNIT                 = "DEGREE"                                            
   FORMAT               = "F5.1"                                              
   DESCRIPTION          = "Scanner position in degrees"                       
END_OBJECT              = COLUMN