PDS_VERSION_ID                    = PDS3                             
LABEL_REVISION_NOTE  = "2004-11-21, SONC, initial release;
                        2010-01-14, SONC, keywords updated
                           ABSTRACT_DESC, CITATION_DESC,
                           CONFIDENCE_LEVEL_NOTE
                        2015-06-03, SONC, AST1 phase updated
                        2018-01-18, LPC2E, N. TRAORE, correction of
                                    OBT->UTC conversion"

RECORD_TYPE             = STREAM

OBJECT                  = DATA_SET
  DATA_SET_ID           = "RO-A-RPCMIP-3-AST1-V2.0"

  OBJECT                = DATA_SET_INFORMATION
    DATA_SET_NAME       = "ROSETTA-ORBITER STEINS RPCMIP 3 AST1 V2.0"
    DATA_SET_TERSE_DESC = "This data set contains the data referred
                           to AST1 (STEINS FLY-BY) phase,
                           between 2008/08/04 and 2008/10/05"
    DATA_SET_COLLECTION_MEMBER_FLG = "N"
    DATA_OBJECT_TYPE    = TABLE
    START_TIME          = 2008-08-04T00:00:00.000
    STOP_TIME           = 2008-10-05T23:59:59.000
    DATA_SET_RELEASE_DATE = 2018-05-04
    PRODUCER_FULL_NAME  = {"LAB DE PHYSIQUE ET CHIMIE DE
                            L'ENVIRONNEMENT ET DE L'ESPACE",
                           "SCIENCE OPERATIONS AND NAVIGATION CENTER"}
    DETAILED_CATALOG_FLAG = "N"
    ABSTRACT_DESC       = "This archive contains data from the
                           RPC-MIP instrument onboard ROSETTA Orbiter
                           acquired during the STEINS FLY-BY
                           mission phase.
                           The primary target was comet 67P/C-G.
                           It also contains documentation which describes
                           the RPC-MIP experiment. The data archived in this
                           data set conform to the Planetary Data System
                           Standards, Version 3.6.
                           This is V3.0 updated after Science Review."
    ARCHIVE_STATUS      = "ARCHIVED"
    CITATION_DESC       = "P. Henri, X. Vallieres, D. Lagoutte, N. Traore
                           ROSETTA-ORBITER STEINS RPCMIP 3 AST1 V2.0,
                           RO-A-RPCMIP-3-AST1-V2.0,
                           ESA Planetary Science Archive and
                           NASA Planetary Data System, 2018"
    CONFIDENCE_LEVEL_NOTE = "Data confidence is nominal, meaning that
                             all data have been validated by the
                             scientific team and found as expected.
                             Any exceptions are noted by the
                             DATA_QUALITY_ID."
    DATA_SET_DESC       = "

    Data Set Overview
    =================
    This data set contains the data referred to AST1 Mission Phase.

    Data
    ====
    Both data, scientific and housekeeping, are collected in this data
    set. They referred to CODMAC Level 3.

    Processing
    ==========
    Only CODMAC Level 3 data are present in this data set.

    Coordinate System
    =================
    The geometry items SC_SUN_POSITION_VECTOR, SC_TARGET_POSITION_VECTOR
    and SC_TARGET_VELOCITY_VECTOR provided in the label of the data
    product are relative to the Earth Mean Equator and Equinox reference
    frame of J2000.
    SUB_SPACECRAFT_LATITUDE, SUB_SPACECRAFT_LONGITUDE are given in the
    PLANETOCENTRIC coordinate system. These parameters are computed at
    time t=START_TIME. Distances are given in km, angles in degrees.
    "

  END_OBJECT            = DATA_SET_INFORMATION

  OBJECT                = DATA_SET_MISSION
    MISSION_NAME        = "INTERNATIONAL ROSETTA MISSION"
  END_OBJECT            = DATA_SET_MISSION

  OBJECT                = DATA_SET_TARGET
    TARGET_NAME         = "2867 STEINS"
  END_OBJECT            = DATA_SET_TARGET

  OBJECT                = DATA_SET_HOST
    INSTRUMENT_HOST_ID  = "RO"
    INSTRUMENT_ID       = "RPCMIP"
  END_OBJECT            = DATA_SET_HOST

  OBJECT                = DATA_SET_REFERENCE_INFORMATION
    REFERENCE_KEY_ID    = "TROTIGNONETAL2007"
  END_OBJECT            = DATA_SET_REFERENCE_INFORMATION

END_OBJECT              = DATA_SET

END