# $Log: OIOR_PI6RSO_D_0015_MR_02____.ITL,v $
#
# Revision 1.5	2009/08/08 - L.Kamp
# Updated filename for delivery to ORFA (version 00051)
#
# Revision 1.4  2009/07/30 17:56:55  kwirth
# Corrected comments.
#
# Revision 1.3  2009/07/29 15:43:41  kwirth
# Update sent by L. Kamp via e-mail on 28 Jul.
#
# Revision 1.3  2009/07/27 -  L.Kamp
# Removed Disable Science at end since we want to analyze CTS gains during
# dark sky observations.
# Revised patch to use MPRs instead of AMRF001B.  (Version with AMRF001B is called
# OIOR_PI6RSO_D_0015_MR_02BU__.ITL.)
#
# Revision 1.2  2009/07/17 21:02:05  kwirth
# Updates after analysing the first version of the OIORs for MR in ESB3.
#
# Revision 1.1  2009/07/17 18:21:33  kwirth
# Preliminary ESB3 MR02 OIOR sent by L. Kamp via e-mail on 15 Jul.
# Original filename: OIOR_PI6RSO_D_0015_MR_02____00050.ROS.
#
# Initial version 2009/07/13 by L.Kamp
#
#
#=======================================================================================#
#
# Filename:	OIOR_PI6RSO_D_0015_MR_02____00051.ROS
# Type:	Orbiter Instrument Operations Request file
#
# Description:	Earth observations at closest approach
# Initial configuration: OFF. Final configuration: CTS/Dual Continuum.
# RSOC change: Corrected initial configuration.
# Includes 6 hrs stabilization.
#
# Authors:	Kristin Wirth (RSOC), Lucas Kamp (MIRO)
#	
# Date: 14 Jul 2009 
#
#=======================================================================================#

Version: 00001

Ref_date: 01-Jan-2000 # Irrelevant because will be overridden by top-level ITL, but needed for ORFA.
                                                   
# 000_00:00:00 is assumed to be the corresponding MR_START in EVF_MAN_SOC_EARTH_SWINGBY_3____.EVF

Start_time: -000_06:00:00
End_time:    000_01:00:00 

#=======================================================================================#
Description: "1.   | Switch on MIRO."
#=======================================================================================#

-000_06:00:00 MIRO OFF AMRF001A # Power On MIRO via OBCP

Description: "MPR #1 to be executed 2 min after start of AMRF001A (power on). Duration 30 sec."
Description: "RMOC to manually add command to the MTL."

-000_05:57:30 MIRO Engineering AMRS613A # Software Restart

Description: "MPR #2 to be executed 2 min after Software Restart. Duration 5 min."
Description: "RMOC to manually add command to the MTL."

-000_05:50:30 MIRO Engineering AMRS613A # Software Restart

#=======================================================================================#
Description: "2.   | Warm up instrument."
#=======================================================================================#

-000_05:47:30 MIRO Engineering AMRF008A # "MIRO USO ON v06"

-000_05:44:30 MIRO Engineering AMRF007A # "MIRO Cal Heat On v04"

-000_05:41:30 MIRO Engineering AMRF009A # "MIRO CTS Warm-up v06"

#=======================================================================================#
Description: "3.   | Go to science mode. Wait (almost) 6 hrs to stabilize."
#=======================================================================================#

-000_05:31:30 MIRO Engineering AMRF011A # CTS/Dual Continuum

#=======================================================================================#
Description: "4.   | Issue Mode Change commands 35 and 15 minutes before CA, which is"
Description: "     | 25 minutes after MR_START."
#=======================================================================================#

-000_00:10:00 MIRO CTS_DualCntm  AMRF011A # CTS/Dual Contin

 000_00:10:00 MIRO CTS_DualCntm  AMRF011A # CTS/Dual Contin