PDS_VERSION_ID = PDS3 LABEL_REVISION_NOTE = "2009-03-09, SONC, initial release; 2010-01-14, SONC, keywords updated ABSTRACT_DESC, CITATION_DESC, CONFIDENCE_LEVEL_NOTE ;" RECORD_TYPE = STREAM OBJECT = DATA_SET DATA_SET_ID = "RL-A-COSAC-2-AST2-V1.0" OBJECT = DATA_SET_INFORMATION DATA_SET_NAME = "ROSETTA-LANDER LUTETIA COSAC 2 AST2 V1.0" DATA_SET_TERSE_DESC = "This data set contains the data referred to AST2 Mission Phase (Lutetia fly-by)" DATA_SET_COLLECTION_MEMBER_FLG = "N" DATA_OBJECT_TYPE = TABLE START_TIME = 2010-07-10T13:03:01.218 STOP_TIME = 2010-07-10T16:53:00.937 DATA_SET_RELEASE_DATE = 2012-10-09 PRODUCER_FULL_NAME = "SCIENCE OPERATIONS AND NAVIGATION CENTER" DETAILED_CATALOG_FLAG = "N" ABSTRACT_DESC = "This archive contains raw data from the COSAC instrument onboard ROSETTA Lander, acquired during the AST2 phase (Lutetia fly-by). It also contains documentation which describes the COSAC experiment. The data archived in this data set conform to the Planetary Data System (PDS) Standards, Version 3.6." ARCHIVE_STATUS = "IN QUEUE" CITATION_DESC = "H. Fischer, F. Goesmann, O. Kuechemann, R. Roll, RL-A-COSAC-2-AST2-V1.0, ESA Planetary Science Archive, 2010." CONFIDENCE_LEVEL_NOTE = "Data confidence is nominal, meaning that all data have been validated by the scientific team and found as expected. Any exceptions are noted by the DATA_QUALITY_ID." DATA_SET_DESC = " Data Set Overview ================= This data set contains the data referred to AST2 Mission Phase (Lutetia fly-by). Data ==== Both data, scientific and housekeeping, are collected in this data set. They referred to CODMAC Level 2. Processing ========== Only CODMAC Level 2 data are present in this data set. Coordinate System ================= The geometry items SC_SUN_POSITION_VECTOR, SC_TARGET_POSITION_VECTOR and SC_TARGET_VELOCITY_VECTOR provided in the label of the data product are relative to the Earth Mean Equator and Equinox reference frame of J2000. SUB_SPACECRAFT_LATITUDE, SUB_SPACECRAFT_LONGITUDE are given in the PLANETOCENTRIC coordinate system. These parameters are computed at time t=START_TIME. Distances are given in km, angles in degrees. " END_OBJECT = DATA_SET_INFORMATION OBJECT = DATA_SET_TARGET TARGET_NAME = "21 LUTETIA" END_OBJECT = DATA_SET_TARGET OBJECT = DATA_SET_MISSION MISSION_NAME = "INTERNATIONAL ROSETTA MISSION" END_OBJECT = DATA_SET_MISSION OBJECT = DATA_SET_HOST INSTRUMENT_HOST_ID = "RL" INSTRUMENT_ID = "COSAC" END_OBJECT = DATA_SET_HOST OBJECT = DATA_SET_REFERENCE_INFORMATION REFERENCE_KEY_ID = "GOESMANNETAL2007" END_OBJECT = DATA_SET_REFERENCE_INFORMATION END_OBJECT = DATA_SET END