HIFI Cycle 30 Cal delivery HIFI Delivery note - 9th December 2010 Dear HSC Colleagues, This e-mail is to notify you that HIFI ICC has just uploaded the tar file containing the delivery of HIFI observations for cycle 30 onto the CVS server. 1. Delivery file, directory: a) OD tar file names: - CYCLE30_HIFI_FULL_1_20101209.tar b) CVS server directory: - develop/data/observingmodes/rp_cycles/cycle030 2. Mission Configurations: a) Does this delivery include a new Calibration Mission configuration? Yes b) Does this delivery include a new Astro Mission configuration? No 3. Operations Issues a) Will any of these delivered observations generate a significant amount of Telecommands? No b) Do you wish to have these calibrations observations scheduled in the Real Time Science period of the DTCP? Not a requirement. c) ICC to add anything specific to this OD which HSC & MOC should be aware of: Instructions are in the Readme file. Note that one AOR has to be scheduled using the ASTR MC H64. Please acknowledge receipt of the e-mail and the delivery. Best regards, Christophe Take Note of the Tar File & the New MC name (for MPS email and for steps below) CYCLE030_HIFI_FULL_1_20101209.tar (note wrong name in delivery note) (Note: Name given in delivery note is incorrect - checked on CVS server) New MC - MC H63_Cal 2. Software used for import + Source the Environment (if not already done!!) HCSS SOFTWARE = 4.5.0 (Always use the most recent HCSS Software version) PHS SOFTWARE = 5.1.4_PHS (Always use the most recent PHS Software version) Herjbo02 - HCSS_PHS_TEST_herjbo02_0_6_6.props file & source .minimal_herjbo02 : PHS: Using BUILDNUM 534 & PHS: Using JBOSS_HOME /usr/local/software/jboss/jboss-3.2.6_0_6_5 Machines used : - heropl02 - hscphs2 for the uplink co-ord part - heropl02 - hscphs2 for the PropHandler - heropl01 - hscmps1 for the MPS - herjbo02 - hsc_phs account Source the Environment before you proceed to step 3. hscphs2@heropl02/home/hscphs2/otherSetups> source setHcssEnvironment_v4.5.0 TAKE NOTE : If there is a newer HCSS software version in the otherSetups directory then source that new version. 3. What is the Mission Configuration Name going to be?? MC_H63_P60_S61_CAL 4. Make the directories in the delivery directory and MC directory) hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle30> ls HIFI/ logs/ PACS/ SPIRE/ hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle30/HIFI> mkdir HIFI_FULL_1 This LOG file has been placed in the /logs directory and given the name Cycle030_HIFI_FULL_1.log. hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H61_P58_S61_CAL> mkdir PACS hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL> mkdir SPIRE hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL> mkdir HIFI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL> mkdir logs hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL> ls HIFI/ logs/ PACS/ SPIRE/ 5. Copy across the contents of the PACS directory from a previous mission_config subdirectory into the equivalent subdirectories of the MC_H63_P60_S61_CAL folder. Next remove in the subfolders all files which were created when you ran the HIFI, SPIRE & PACS duration files e.g. tmp, SPIRE_cus_scipts, SPIRE_harness etc etc. PACS hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/PACS> cp /home/hscphs2/icchsc/mission_config/MC_H64ASTR_P60ASTR_S61ASTR_RP/PACS/* . hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/PACS> ls 2createOBSMODtable4RP.sh* msgPacsRangeSpec.txt 2createOBSMODtable4RP.sh~* PACS_AOR_C030_60.aor CYCLE030_PACS_FULL_1_20101207.tar PACS_Duration_PACS_compare.txt importall.sh* PACS_Duration_PACS.txt ls PACS_MC_ASTR_OT1_2010-12-07C_C030_60_CUS_CAL.xml msgPacsCal_PacsPhotoDACSlowScan.txt PACS_MC_ASTR_OT1_2010-12-07C_C030_60_CUS.def msgPacsCal_PacsRangeSpec_PV.txt PACS_Readme_C030_60.txt msgPacsEng_Pacs_EDAC_to_DMC_HK.txt tmp msgPacsLineSpec.txt tmpobsmode msgPacsPhoto.txt hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/PACS> rm tmp* msg* PACS_Duration_PACS.txt rm: remove regular file `tmp'? y rm: remove regular file `tmpobsmode'? y rm: remove regular file `msgPacsCal_PacsPhotoDACSlowScan.txt'? y rm: remove regular file `msgPacsCal_PacsRangeSpec_PV.txt'? y rm: remove regular file `msgPacsEng_Pacs_EDAC_to_DMC_HK.txt'? y rm: remove regular file `msgPacsLineSpec.txt'? y rm: remove regular file `msgPacsPhoto.txt'? y rm: remove regular file `msgPacsRangeSpec.txt'? y rm: remove regular file `PACS_Duration_PACS.txt'? y hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/PACS> ls 2createOBSMODtable4RP.sh* PACS_AOR_C030_60.aor 2createOBSMODtable4RP.sh~* PACS_Duration_PACS_compare.txt CYCLE030_PACS_FULL_1_20101207.tar PACS_MC_ASTR_OT1_2010-12-07C_C030_60_CUS_CAL.xml importall.sh* PACS_MC_ASTR_OT1_2010-12-07C_C030_60_CUS.def ls PACS_Readme_C030_60.txt SPIRE hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/SPIRE> cp /home/hscphs2/icchsc/mission_config/MC_H64ASTR_P60ASTR_S61ASTR_RP/SPIRE/* . hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/SPIRE> ls CYCLE028_SPIRE_FULL_1_0_20101108.tar SPIRE_harness_duration_summary_20101109_15h38m18s.log SPIRE_AOR_C028_61_CAL.aor SPIRE_harness_duration_summary_20101123_09h34m04s.log SPIRE_AOR_C028_61_ENG.aor SPIRE_harness_duration_summary_20101209_12h19m27s.log SPIRE_cus_scripts.txt SPIRE_MC_ASTR_pv87_C028_61_CUS_CAL.xml SPIRE_CUS_THCP.py SPIRE_MC_ASTR_pv87_C028_61_CUS.def SPIRE_Duration.txt SPIRE_Readme_C028_61.txt 6(a) Download & Untar the delivery from the CVS into the new mission_config directory (& the delivery directory) hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle30/HIFI/HIFI_FULL_1> setenv CVSROOT :pserver:lorourke@cvs.rssd.esa.int:/services/repositories/HERSCHEL_CVS hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle30/HIFI/HIFI_FULL_1> cvs login Logging in to :pserver:lorourke@cvs.rssd.esa.int:2401/services/repositories/HERSCHEL_CVS CVS password: hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle30/HIFI/HIFI_FULL_1> cvs co develop/data/observingmodes/rp_cycles/cycle030/CYCLE030_HIFI_FULL_1_20101209.tar U develop/data/observingmodes/rp_cycles/cycle030/CYCLE030_HIFI_FULL_1_20101209.tar hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle30/HIFI/HIFI_FULL_1> cp develop/data/observingmodes/rp_cycles/cycle030/CYCLE030_HIFI_FULL_1_20101209.tar . hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle30/HIFI/HIFI_FULL_1> ls CYCLE030_HIFI_FULL_1_20101209.tar develop/ hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle30/HIFI/HIFI_FULL_1> tar -xvf CYCLE030_HIFI_FULL_1_20101209.tar HIFI_AOR_C030_63.aor HIFI_DUR_C030_63.txt HIFI_MC_R071_FULL_63_0_CUS_CAL.xml HIFI_MC_R071_FULL_63_0_CUS.def HIFI_Readme_C030_63.txt duration_cal.sh hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle30/HIFI/HIFI_FULL_1> ls CYCLE030_HIFI_FULL_1_20101209.tar HIFI_AOR_C030_63.aor HIFI_MC_R071_FULL_63_0_CUS.def develop/ HIFI_DUR_C030_63.txt HIFI_Readme_C030_63.txt duration_cal.sh* HIFI_MC_R071_FULL_63_0_CUS_CAL.xml hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle30/HIFI/HIFI_FULL_1> cp * /home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/HIFI/ cp: omitting directory `develop' hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/HIFI> ls CYCLE030_HIFI_FULL_1_20101209.tar HIFI_DUR_C030_63.txt HIFI_Readme_C030_63.txt duration_cal.sh* HIFI_MC_R071_FULL_63_0_CUS_CAL.xml HIFI_AOR_C030_63.aor HIFI_MC_R071_FULL_63_0_CUS.def 6(b) To import the old PACS delivery: #CUS #var.hcss.instrument = SPIRE var.hcss.instrument = PACS #var.hcss.instrument = HIFI hcss.cus.model = FLIGHT Check with CUSGUI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/PACS> Dec 10, 2010 12:14:20 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Dec 10, 2010 12:14:20 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Dec 10, 2010 12:14:21 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 12:14:21 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 12:14:21 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 12:14:21 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 12:14:21 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 12:14:21 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 12:14:21 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from PACS, specified by property hcss.cus.instrument Dec 10, 2010 12:14:27 PM herschel.cus.gui.CusEditor exit INFO: Quitting. TAKE NOTE : CONFIRM THAT PACS IS THE INSTRUMENT MODEL IN THE CUSGUI OUTPUT : CONFIRMED!!!! We already have the correct CUS loaded, so we can skip this. 6(c) Clean the CUS & Cal tables from the instrument model hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/PACS> cus -f -m "clean PACS CUS from DB" -deleteall Nov 15, 2010 12:26:01 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Nov 15, 2010 12:26:02 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Nov 15, 2010 12:26:02 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Nov 15, 2010 12:26:02 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Nov 15, 2010 12:26:02 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Nov 15, 2010 12:26:02 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Nov 15, 2010 12:26:02 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Nov 15, 2010 12:26:02 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Nov 15, 2010 12:26:11 PM herschel.cus.gui.Cus infoMessage INFO: All definitions have been deleted hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/PACS> cus -f -m "clean PACS CAL from DB" -caldeleteall Nov 15, 2010 12:26:35 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Nov 15, 2010 12:26:35 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Nov 15, 2010 12:26:37 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Nov 15, 2010 12:26:37 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Nov 15, 2010 12:26:37 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Nov 15, 2010 12:26:37 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Nov 15, 2010 12:26:37 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Nov 15, 2010 12:26:37 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Nov 15, 2010 12:26:41 PM herschel.cus.gui.Cus infoMessage INFO: All calibration tables successfully deleted TAKE NOTE : OPEN UP CUSGUI & VERIFY IT IS EMPTY i.e. No Cus scripts & No Parameter tables - VERIFIED!!! TAKE NOTE : Check HPSDB in the CUSGUI Session = hpsdb_MOC9_201003161700 - CONFIRMED!! 6(d) Import the new Instrument CUS & Cal tables into the DB Import old Mission Configuration (Version 58.0). hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/PACS> cus -m "upload PACS_MC_58ASTR mission configuration as Cal" -import PACS_MC_ASTR_OT1_2010-10-22A_C027_58_CUS.def -importcaltables PACS_MC_ASTR_OT1_2010-10-22A_C027_58_CUS_CAL.xml Nov 15, 2010 12:27:26 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Nov 15, 2010 12:27:26 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Nov 15, 2010 12:27:27 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Nov 15, 2010 12:27:27 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Nov 15, 2010 12:27:27 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Nov 15, 2010 12:27:27 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Nov 15, 2010 12:27:27 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Nov 15, 2010 12:27:27 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Nov 15, 2010 12:27:52 PM herschel.cus.gui.Cus infoMessage INFO: Definitions successfully imported Nov 15, 2010 12:27:52 PM herschel.cus.gui.Cus infoMessage INFO: Using current directory Nov 15, 2010 12:27:52 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Nov 15, 2010 12:27:52 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Nov 15, 2010 12:27:52 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Nov 15, 2010 12:27:52 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Nov 15, 2010 12:27:52 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Nov 15, 2010 12:27:52 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Nov 15, 2010 12:27:52 PM herschel.versant.ccm.IdRegistryCommitThread findOrCreateId INFO: Creating new IdRegistry entry idreg_productIdRegistry Nov 15, 2010 12:28:12 PM herschel.cus.gui.Cus infoMessage INFO: Calibration tables successfully imported from "PACS_MC_ASTR_OT1_2010-10-22A_C027_58_CUS_CAL.xml" TAKE NOTE : The file referred to at the end import message shall correspond to the file that was delivered by PACS: PACS_MC_ASTR_OT1_2010-10-22A_C027_58_CUS_CAL.xml CONFIRMED!! Re-join here 6(e) Run the duration script for the PACS instrument model: Open duration script (2createOBSMODtable4RP.sh) and point it to HCSS 4.5.0 hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/PACS> ./2createOBSMODtable4RP.sh PACS PACS_AOR_C030_60.aor /home/hscphs2/.hcss/Uplink_Coord_1_2.props /home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/PACS hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/PACS> ls -ls total 11304 4 -rwxr-xr-- 1 hscphs2 herschel 1538 Dec 9 11:07 2createOBSMODtable4RP.sh* 4 -rwxr-xr-- 1 hscphs2 herschel 1539 Dec 9 11:07 2createOBSMODtable4RP.sh~* 5632 -rw-r--r-- 1 hscphs2 herschel 5754880 Dec 7 14:50 CYCLE030_PACS_FULL_1_20101207.tar 4 -rwxr-xr-x 1 hscphs2 herschel 191 Feb 9 2010 importall.sh* 0 -rw-r--r-- 1 hscphs2 herschel 0 Dec 9 10:55 ls 4 -rw-r--r-- 1 hscphs2 herschel 77 Dec 10 12:17 msgPacsCal_PacsPhotoDACSlowScan.txt 4 -rw-r--r-- 1 hscphs2 herschel 74 Dec 10 12:18 msgPacsCal_PacsRangeSpec_PV.txt 4 -rw-r--r-- 1 hscphs2 herschel 75 Dec 10 12:18 msgPacsEng_Pacs_EDAC_to_DMC_HK.txt 0 -rw-r--r-- 1 hscphs2 herschel 62 Dec 10 12:17 msgPacsLineSpec.txt 0 -rw-r--r-- 1 hscphs2 herschel 59 Dec 10 12:17 msgPacsPhoto.txt 0 -rw-r--r-- 1 hscphs2 herschel 63 Dec 10 12:17 msgPacsRangeSpec.txt 144 -rw-r--r-- 1 hscphs2 herschel 142976 Dec 7 14:35 PACS_AOR_C030_60.aor 4 -rw-r--r-- 1 hscphs2 herschel 1824 Dec 7 14:42 PACS_Duration_PACS_compare.txt 4 -rw-r--r-- 1 hscphs2 herschel 1824 Dec 10 12:18 PACS_Duration_PACS.txt 400 -rw-r--r-- 1 hscphs2 herschel 404088 Dec 7 14:24 PACS_MC_ASTR_OT1_2010-12-07C_C030_60_CUS_CAL.xml 5080 -rw-r--r-- 1 hscphs2 herschel 5186062 Dec 7 14:24 PACS_MC_ASTR_OT1_2010-12-07C_C030_60_CUS.def 8 -rw-r--r-- 1 hscphs2 herschel 6230 Dec 7 14:47 PACS_Readme_C030_60.txt 4 -rw-r--r-- 1 hscphs2 herschel 1148 Dec 10 12:16 tmp 4 -rw-r--r-- 1 hscphs2 herschel 458 Dec 10 12:16 tmpobsmode hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/PACS> diff PACS_Duration_PACS_compare.txt PACS_Duration_PACS.txt Perfect. No differences! Skip this. CUS already committed. 6(f) If Durations are OK then COMMIT the Delivery with CUSGUI OPENED CUSGUI & COMMITTED (REGISTRY/COMMIT) THE PACS DELIVERY In the Comment field, refer to PACS MC P58ASTR as CAL TAKE NOTE : It is very important that you commit the delivery as defined above. Re-join here... Now create the MC in the database hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/PACS> missetup -addconfig MC_H63_P60_S61_CAL Dec 10, 2010 12:20:25 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Dec 10, 2010 12:20:26 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Dec 10, 2010 12:20:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 12:20:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 12:20:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 12:20:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 12:20:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 12:20:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 12:20:27 PM herschel.ccm.tools.MissionSetup infoMessage INFO: Using database "hsc_ops_operations_tm_1@herdb02.esac.esa.int" Dec 10, 2010 12:20:37 PM herschel.ccm.tools.MissionSetup infoMessage INFO: Mission configuration "MC_H63_P60_S61_CAL" created in database "hsc_ops_operations_tm_1@herdb02.esac.esa.int" Add the commited CUS to the new MC hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/PACS> Dec 10, 2010 12:21:02 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Dec 10, 2010 12:21:03 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Dec 10, 2010 12:21:03 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 12:21:03 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 12:21:03 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 12:21:04 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 12:21:04 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 12:21:04 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 12:21:04 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from PACS, specified by property hcss.cus.instrument Dec 10, 2010 12:23:08 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H63_P60_S61_CAL" Dec 10, 2010 12:23:21 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 12:23:21 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 12:23:21 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 12:23:21 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 12:23:21 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 12:23:21 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 12:23:21 PM herschel.versant.ccm.IdRegistryCommitThread findOrCreateId INFO: Creating new IdRegistry entry idreg_productIdRegistry Dec 10, 2010 12:23:45 PM herschel.cus.gui.CusEditor exit INFO: Quitting. Steps to import the new HIFI Instrument model into the MC Set Instrument Model = HIFI Check with CUSGUI Run the duration script for the HIFI instruments Import HIFI into the new Mission Configuration 7(a) Set Instrument Model = HIFI hscphs2@heropl02/home/hscphs2/.hcss> emacs Uplink_Coord.props & #CUS #var.hcss.instrument = SPIRE #var.hcss.instrument = PACS var.hcss.instrument = HIFI hcss.cus.model = FLIGHT Check with CUSGUI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/HIFI> Dec 10, 2010 12:30:10 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Dec 10, 2010 12:30:11 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Dec 10, 2010 12:30:11 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 12:30:11 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 12:30:11 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 12:30:11 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 12:30:11 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 12:30:11 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 12:30:11 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from HIFI, specified by property hcss.cus.instrument Dec 10, 2010 12:30:19 PM herschel.cus.gui.CusEditor exit INFO: Quitting. TAKE NOTE : Instrument above must be HIFI if you want to work with the HIFI instrument model. - CONFIRMED!! 7(c) Clean the CUS & Cal tables from the instrument model hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/HIFI> cus -f -m "clean HIFI CUS from DB" -deleteall Dec 10, 2010 12:30:49 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Dec 10, 2010 12:30:50 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Dec 10, 2010 12:30:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 12:30:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 12:30:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 12:30:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 12:30:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 12:30:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 12:30:56 PM herschel.cus.gui.Cus infoMessage INFO: All definitions have been deleted hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/HIFI> cus -f -m "clean HIFI CAL from DB" -caldeleteall Dec 10, 2010 1:37:29 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Dec 10, 2010 1:37:30 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Dec 10, 2010 1:37:30 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 1:37:30 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 1:37:30 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 1:37:30 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 1:37:30 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 1:37:30 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 1:37:33 PM herschel.cus.gui.Cus infoMessage INFO: All calibration tables successfully deleted TAKE NOTE : OPEN UP CUSGUI & VERIFY IT IS EMPTY i.e. No Cus scripts & No Parameter tables - VERIFIED!!! TAKE NOTE : Check HPSDB in the CUSGUI Session = hpsdb_MOC9_201003161700 - CONFIRMED!! 7(d) Import the new Instrument CUS & Cal tables into the DB Import new Mission Configuration (H63Cal). hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/HIFI> cus -m "upload HIFI MC63Cal mission config" -import HIFI_MC_R071_FULL_63_0_CUS.def -importcaltables HIFI_MC_R071_FULL_63_0_CUS_CAL.xml Dec 10, 2010 1:39:12 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Dec 10, 2010 1:39:12 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Dec 10, 2010 1:39:13 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 1:39:13 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 1:39:13 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 1:39:13 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 1:39:13 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 1:39:13 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 1:39:30 PM herschel.cus.gui.Cus infoMessage INFO: Definitions successfully imported Dec 10, 2010 1:39:30 PM herschel.cus.gui.Cus infoMessage INFO: Using current directory Dec 10, 2010 1:39:31 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 1:39:31 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 1:39:31 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 1:39:31 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 1:39:31 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 1:39:31 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 1:39:31 PM herschel.versant.ccm.IdRegistryCommitThread findOrCreateId INFO: Creating new IdRegistry entry idreg_productIdRegistry Dec 10, 2010 1:39:36 PM herschel.cus.gui.Cus infoMessage INFO: Calibration tables successfully imported from "HIFI_MC_R071_FULL_63_0_CUS_CAL.xml" TAKE NOTE : The file referred to at the end import message shall correspond to the file that was delivered by HIFI: HIFI_MC_R071_FULL_63_0_CUS_CAL.xml CONFIRMED!! 7(e) Run the duration script for the HIFI instrument Run the duration script delivered hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/HIFI> ./duration_cal.sh HIFI_AOR_C030_63 next AOR file = HIFI_AOR_C030_63 -- mode HifiEng_Chopper_FT2_COP -- mode HifiEng_Chopper_Response_time_COP -- mode HifiEng_Diplexer_Response_time_COP -- mode HifiEng_FPU_FT_IVC_COP -- mode HifiEng_HRS_FT_COP -- mode HifiEng_LO_FT_IVC_COP -- mode HifiEngSetIntoPrimary -- mode HifiEngSwitchonLO -- mode HifiEng_Tsys_COP -- mode HifiEng_Vecscan_calibration_COP -- mode HifiEng_WBS_FT_COP -- mode HifiMappingProcDBSRaster -- mode HifiPointProcDBS -- mode HifiPointProcPositionSwitch -- mode HifiPointModeDBS -- mode HifiPointModeFastDBS -- mode HifiPointModeFSwitch -- mode HifiPointModeFSwitchNoRef -- mode HifiPointModeLoadChop -- mode HifiPointModeLoadChopNoRef -- mode HifiPointModePositionSwitch -- mode HifiMappingModeDBSCross -- mode HifiMappingModeDBSRaster -- mode HifiMappingModeFastDBSCross -- mode HifiMappingModeFastDBSRaster -- mode HifiMappingModeFSwitchOTF -- mode HifiMappingModeFSwitchOTFNoRef -- mode HifiMappingModeLoadChopOTF -- mode HifiMappingModeLoadChopOTFNoRef -- mode HifiMappingModeOTF -- mode HifiSScanModeDBS -- mode HifiSScanModeFastDBS -- mode HifiSScanModeFSwitch -- mode HifiSScanModeFSwitchNoRef -- mode HifiSScanModeLoadChop -- mode HifiSScanModeLoadChopNoRef Total duration of HifiEng_Chopper_FT2_COP with default parameters = 114 Total duration of HifiEng_Chopper_Response_time_COP with default parameters = 44 Total duration of HifiEng_Diplexer_Response_time_COP with default parameters = 85 Total duration of HifiEng_FPU_FT_IVC_COP with default parameters = 65 Total duration of HifiEng_HRS_FT_COP with default parameters = 1101 Total duration of HifiEng_LO_FT_IVC_COP with default parameters = 227 Total duration of HifiEngSetIntoPrimary with default parameters = 6 Total duration of HifiEngSwitchonLO with default parameters = 401 Total duration of HifiEng_Tsys_COP with default parameters = 1533 Total duration of HifiEng_Vecscan_calibration_COP with default parameters = 2529 Total duration of HifiEng_WBS_FT_COP with default parameters = 1388 Total duration of HifiMappingProcDBSRaster with default parameters = 850 Total duration of HifiPointProcDBS with default parameters = 157 Total duration of HifiPointProcPositionSwitch with default parameters = 139 Total duration of HifiPointModeDBS with default parameters = 157 Total duration of HifiPointModeFastDBS with default parameters = 145 Total duration of HifiPointModeFSwitch with default parameters = 180 Total duration of HifiPointModeFSwitchNoRef with default parameters = 156 Total duration of HifiPointModeLoadChop with default parameters = 147 Total duration of HifiPointModeLoadChopNoRef with default parameters = 123 Total duration of HifiPointModePositionSwitch with default parameters = 139 Total duration of HifiMappingModeDBSCross with default parameters = 497 Total duration of HifiMappingModeDBSRaster with default parameters = 233 Total duration of HifiMappingModeFastDBSCross with default parameters = 425 Total duration of HifiMappingModeFastDBSRaster with default parameters = 209 Total duration of HifiMappingModeFSwitchOTF with default parameters = 235 Total duration of HifiMappingModeFSwitchOTFNoRef with default parameters = 162 Total duration of HifiMappingModeLoadChopOTF with default parameters = 202 Total duration of HifiMappingModeLoadChopOTFNoRef with default parameters = 129 Total duration of HifiMappingModeOTF with default parameters = 168 Total duration of HifiSScanModeDBS with default parameters = 386 Total duration of HifiSScanModeFastDBS with default parameters = 338 Total duration of HifiSScanModeFSwitch with default parameters = 500 Total duration of HifiSScanModeFSwitchNoRef with default parameters = 417 Total duration of HifiSScanModeLoadChop with default parameters = 350 Total duration of HifiSScanModeLoadChopNoRef with default parameters = 285 hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/HIFI> ls -ls total 11460 5724 -rw-r--r-- 1 hscphs2 herschel 5847040 Dec 9 16:49 CYCLE030_HIFI_FULL_1_20101209.tar 4 -rwxr-xr-x 1 hscphs2 herschel 2697 Dec 9 15:14 duration_cal.sh* 192 -rw-r--r-- 1 hscphs2 herschel 191222 Dec 9 16:13 HIFI_AOR_C030_63.aor 4 -rw-r--r-- 1 hscphs2 herschel 2636 Dec 9 15:51 HIFI_DUR_C030_63.txt 2172 -rw-r--r-- 1 hscphs2 herschel 2211862 Dec 9 15:48 HIFI_MC_R071_FULL_63_0_CUS_CAL.xml 3352 -rw-r--r-- 1 hscphs2 herschel 3422027 Dec 9 15:48 HIFI_MC_R071_FULL_63_0_CUS.def 8 -rw-r--r-- 1 hscphs2 herschel 7651 Dec 9 16:13 HIFI_Readme_C030_63.txt 4 -rw-r--r-- 1 hscphs2 herschel 2636 Dec 10 13:44 summary_HIFI_AOR_C030_63.log hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/HIFI> diff HIFI_DUR_C030_63.txt summary_HIFI_AOR_C030_63.log No differences. 7(f) If Durations are OK then COMMIT the Delivery with CUSGUI OPENED CUSGUI & COMMITTED (REGISTRY/COMMIT) THE HIFI DELIVERY In the Comment field, refer to HIFI MC H63CAL TAKE NOTE : It is very important that you commit the delivery as defined above. 7(g) Import HIFI into the new Mission Configuration hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/HIFI> Dec 10, 2010 1:53:35 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Dec 10, 2010 1:53:35 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Dec 10, 2010 1:53:36 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 1:53:36 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 1:53:36 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 1:53:36 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 1:53:36 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 1:53:36 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 1:53:36 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from HIFI, specified by property hcss.cus.instrument Dec 10, 2010 1:54:13 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H63_P60_S61_CAL" Dec 10, 2010 1:54:25 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 1:54:25 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 1:54:25 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 1:54:25 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 1:54:25 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 1:54:25 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 1:54:25 PM herschel.versant.ccm.IdRegistryCommitThread findOrCreateId INFO: Creating new IdRegistry entry idreg_productIdRegistry Dec 10, 2010 1:54:52 PM herschel.cus.gui.CusEditor exit INFO: Quitting. Steps to Import the Old SPIRE Instrument model into the MC Set Instrument Model = SPIRE Check with CUSGUI Run the duration script for the PACS instrument Import into the new Mission Configuration 8(a) Set Instrument Model = SPIRE #CUS var.hcss.instrument = SPIRE #var.hcss.instrument = PACS #var.hcss.instrument = HIFI hcss.cus.model = FLIGHT Check with CUSGUI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/SPIRE> Dec 10, 2010 1:57:02 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Dec 10, 2010 1:57:02 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Dec 10, 2010 1:57:02 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 1:57:02 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 1:57:03 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 1:57:03 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 1:57:03 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 1:57:03 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 1:57:03 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from SPIRE, specified by property hcss.cus.instrument Dec 10, 2010 1:57:07 PM herschel.cus.gui.CusEditor exit INFO: Quitting. TAKE NOTE : CONFIRM THAT SPIRE IS THE INSTRUMENT MODEL IN THE CUSGUI OUTPUT : CONFIRMED!!!! Right CUS & CAL loaded. Can skip this... 8(c) Clean the CUS & Cal tables from the instrument model hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/SPIRE> cus -f -m "clean SPIRE CUS from DB" -deleteall Nov 2, 2010 10:25:35 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Nov 2, 2010 10:25:36 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Nov 2, 2010 10:25:36 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Nov 2, 2010 10:25:36 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Nov 2, 2010 10:25:36 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Nov 2, 2010 10:25:36 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Nov 2, 2010 10:25:36 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Nov 2, 2010 10:25:36 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Nov 2, 2010 10:25:42 AM herschel.cus.gui.Cus infoMessage INFO: All definitions have been deleted hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/SPIRE> cus -f -m "clean SPIRE CAL from DB" -caldeleteall Nov 2, 2010 10:28:20 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Nov 2, 2010 10:28:21 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Nov 2, 2010 10:28:21 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Nov 2, 2010 10:28:21 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Nov 2, 2010 10:28:22 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Nov 2, 2010 10:28:22 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Nov 2, 2010 10:28:22 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Nov 2, 2010 10:28:22 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Nov 2, 2010 10:28:25 AM herschel.cus.gui.Cus infoMessage INFO: All calibration tables successfully deleted TAKE NOTE : OPEN UP CUSGUI & VERIFY IT IS EMPTY i.e. No Cus scripts & No Parameter tables - VERIFIED!!! TAKE NOTE : Check HPSDB in the CUSGUI Session = hpsdb_MOC9_201003161700 - CONFIRMED!! 8(d) Import the new Instrument CUS & Cal tables into the DB Import old SPIRE Mission Configuration (Version 60.0). hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/SPIRE> cus -m "upload SPIRE MC_60ASTR mission config as CAL" -import SPIRE_MC_ASTR_pv86_C025_60_CUS.def -importcaltables SPIRE_MC_ASTR_pv86_C025_60_CUS_CAL.xml Oct 14, 2010 5:11:06 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 5:11:07 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 5:11:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:11:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:11:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:11:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:11:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:11:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:11:19 PM herschel.cus.gui.Cus infoMessage INFO: Definitions successfully imported Oct 14, 2010 5:11:19 PM herschel.cus.gui.Cus infoMessage INFO: Using current directory Oct 14, 2010 5:11:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:11:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:11:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:11:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:11:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:11:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:11:22 PM herschel.cus.gui.Cus infoMessage INFO: Calibration tables successfully imported from "SPIRE_MC_ASTR_pv86_C025_60_CUS_CAL.xml" TAKE NOTE : The file referred to at the end import message shall correspond to the file that was delivered by SPIRE: SPIRE_MC_ASTR_pv86_C025_60_CUS_CAL.xml CONFIRMED!! Re-join here... 8(e) Run the duration script for the SPIRE instrument model: hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/SPIRE> python SPIRE_CUS_THCP.py hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/SPIRE> ls -ls total 5128 2540 -rw-r--r-- 1 hscphs2 herschel 2590720 Nov 8 22:55 CYCLE028_SPIRE_FULL_1_0_20101108.tar 92 -rw-r--r-- 1 hscphs2 herschel 88159 Nov 8 22:01 SPIRE_AOR_C028_61_CAL.aor 60 -rw-r--r-- 1 hscphs2 herschel 56528 Nov 8 22:02 SPIRE_AOR_C028_61_ENG.aor 4 -rw-r--r-- 1 hscphs2 herschel 2023 Dec 10 13:58 SPIRE_cus_scripts.txt 4 -rw-r--r-- 1 hscphs2 herschel 1174 Nov 8 22:47 SPIRE_CUS_THCP.py 8 -rw-r--r-- 1 hscphs2 herschel 5451 Nov 8 22:47 SPIRE_Duration.txt 8 -rw-rw-rw- 1 hscphs2 herschel 5451 Nov 9 15:38 SPIRE_harness_duration_summary_20101109_15h38m18s.log 8 -rw-rw-rw- 1 hscphs2 herschel 5451 Nov 23 09:34 SPIRE_harness_duration_summary_20101123_09h34m04s.log 8 -rw-rw-rw- 1 hscphs2 herschel 5451 Dec 9 12:19 SPIRE_harness_duration_summary_20101209_12h19m27s.log 8 -rw-rw-rw- 1 hscphs2 herschel 5451 Dec 10 14:01 SPIRE_harness_duration_summary_20101210_14h01m56s.log 276 -rw-r--r-- 1 hscphs2 herschel 276744 Nov 8 22:48 SPIRE_MC_ASTR_pv87_C028_61_CUS_CAL.xml 2100 -rw-r--r-- 1 hscphs2 herschel 2140168 Nov 8 22:48 SPIRE_MC_ASTR_pv87_C028_61_CUS.def 12 -rw-r--r-- 1 hscphs2 herschel 8934 Nov 8 22:50 SPIRE_Readme_C028_61.txt hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/SPIRE> diff SPIRE_Duration.txt SPIRE_harness_duration_summary_20101210_14h01m56s.log Perfect. No differences! No new CUS loaded. No need to commit. 8(f) If Durations are OK then COMMIT the Delivery with CUSGUI OPENED CUSGUI & COMMITTED (REGISTRY/COMMIT) THE SPIRE DELIVERY In the Comment field, refer to SPIRE MC S60ASTR as CAL. TAKE NOTE : It is very important that you commit the delivery as defined above. Re-join here... 8(g) Import SPIRE model into new Mission Configuration hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H63_P60_S61_CAL/SPIRE> Dec 10, 2010 2:12:37 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Dec 10, 2010 2:12:38 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Dec 10, 2010 2:12:38 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 2:12:38 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 2:12:38 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 2:12:38 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 2:12:38 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 2:12:38 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 2:12:38 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from SPIRE, specified by property hcss.cus.instrument Dec 10, 2010 2:12:56 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H63_P60_S61_CAL" Dec 10, 2010 2:13:06 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 2:13:06 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 2:13:06 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 2:13:06 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 2:13:06 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 2:13:06 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 2:13:06 PM herschel.versant.ccm.IdRegistryCommitThread findOrCreateId INFO: Creating new IdRegistry entry idreg_productIdRegistry Dec 10, 2010 2:13:30 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H63_P60_S61_CAL" Dec 10, 2010 2:13:33 PM herschel.cus.gui.CusEditor exit INFO: Quitting. THIS ENDS THE IMPORT OF THE SPIRE INSTRUMENT MODEL INTO THE MISSION CONFIGURATION. 9.Link PropHandler to the new MC & Start PropHandler to confirm Linked Prophandler to the new Mission Config by updating the Uplink_Coord.props file in .hcss directory #Mission Configuration hcss.ccm.mission.config = MC_H63_P60_S61_CAL Source the PHS Environment for 5.1.4_phs hscphs2@heropl02/home/hscphs2/otherSetups> source setHcssEnvironment_v5.1.4_phs hscphs2@heropl02/home/hscphs2/otherSetups> Dec 10, 2010 2:20:17 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Dec 10, 2010 2:20:17 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Dec 10, 2010 2:20:17 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 2:20:17 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Dec 10, 2010 2:20:17 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 2:20:17 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Dec 10, 2010 2:20:18 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Dec 10, 2010 2:20:18 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Running CDH.getObsProgrammes() Dec 10, 2010 2:20:18 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Loading observation programmes list... Dec 10, 2010 2:20:18 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: CDH: Getting obs progs took: 25 Dec 10, 2010 2:20:18 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Loading observing modes list... Dec 10, 2010 2:20:18 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H63_P60_S61_CAL" Dec 10, 2010 2:20:21 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: CDH: Getting obs modes took: 3070 TAKE NOTE : The PropHandler Terminal log above shows that it is correctly pointing to the new Mission Configuration : CONFIRMED!! 10. Export the Hspot Files from PropHandler In PropHandler, select the Calibration pull down menu and export the HSpot files. TAKE NOTE : When the new window opens showing all the properties files, check that you have property files for SPIRE, PACS & HIFI. CONFIRMED!! Select all the files and in the new window that opens, create a new directory in /home/hscphs2/icchsc/HSpot_files/ Called the same as the Mission Confifguration: Exported all the HSpot files to this folder: hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files> mkdir MC_H63_P60_S61_CAL Example of the last entry in the log: Dec 10, 2010 2:22:59 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Writing calibration prop file:/home/hscphs2/icchsc/HSpot_files/MC_H63_P60_S61_CAL/HifiEng_Fast_LCU_HK_COPGen.prop Dec 10, 2010 2:22:59 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Writing calibration prop file:/home/hscphs2/icchsc/HSpot_files/MC_H63_P60_S61_CAL/HifiManCmdSetIntoDissipativeGen.prop 11. Do the Check for a new script for Eva Do the following: hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H63_P60_S61_CAL> ls *.prop > & MC_H63_P60_S61_CAL.txt hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H63_P60_S61_CAL> ls -ls *.txt 20 -rw-r--r-- 1 hscphs2 herschel 18097 Dec 10 14:25 MC_H63_P60_S61_CAL.txt hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H63_P60_S61_CAL> cp MC_H63_P60_S61_CAL.txt /home/hscphs2/icchsc/HSpot_files/ Now do a diff between this new txt file and the one generated with the last Mission configuration. hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files> diff MC_H61_P58_S60_CAL.txt MC_H63_P60_S61_CAL.txt 281a282 > PacsEng_Pacs_EDAC_to_DMC_HKGen.prop If there is a difference inform Eva, Jose of the result. If there is NO difference then no need to inform Eva. No new HIFI script. Do not notify Eva & Jose 12. Final Jboss Activities Log into Jboss #2 herjbo02.esac.esa.int/home/hsc_phs> source .minimal_herjbo02 PHS: Using BUILDNUM 578 PHS: Using JBOSS_HOME /usr/local/software/jboss/jboss-3.2.6_0_6_5 Stop the Test Jboss : herjbo02.esac.esa.int/home/hsc_phs> stopJbossTest set old=/home/hsc_phs chdir /usr/local/software/jboss/jboss-3.2.6_0_6_5/bin if ( -f .keybind ) echo .keybind exists if ( -f .exrc ) echo .exrc exists ./shutdown.sh -s jnp://localhost:1199 Shutdown message has been posted to the server. Server shutdown may take a while - check logfiles for completion Create a directory which contains the name of the new MC : herjbo02.esac.esa.int/home/hsc_phs> mkdir fileHolder_ops_MC_H63_P60_S61_CAL copied HSpot files from the HSpot_files directory on hscphs2 to this directory TAKE NOTE : You should perform this copy from the HSpot files folder on hscphs2. - DONE : SEE BELOW hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H63_P60_S61_CAL> scp *.prop hsc_phs@herjbo02:/home/hsc_phs/fileHolder_ops_MC_H63_P60_S61_CAL/ Next update the properties file: herjbo02.esac.esa.int/home/hsc_phs/.hcss> kedit HCSS_PHS_TEST_herjbo02_0_6_6.props & [1] 3171 Update each of the fields below in the Properties file : TAKE NOTE : Double check that this is done correctly!! #MARK TIME ESTIMATOR #hcss.phs.timeEstimatorVersion=MC_H64ASTR_P60ASTR_S61ASTR_RP_101209 #hcss.phs.timeEstimatorVersion=MC_H62ASTR_P59ASTR_S61ASTR_RP_101124 #hcss.phs.timeEstimatorVersion=MC_H61_P58_S60_CAL_101102 hcss.phs.timeEstimatorVersion=MC_H63_P60_S61_CAL-101210 #MARK MISSION CONFIG #hcss.ccm.mission.config = MC_H64ASTR_P60ASTR_S61ASTR_RP #hcss.ccm.mission.config = MC_H62ASTR_P59ASTR_S61ASTR_RP #hcss.ccm.mission.config = MC_H61_P58_S60_CAL hcss.ccm.mission.config = MC_H63_P60_S61_CAL #MARK DIRECTORIES #hcss.phs.fileHolder=/home/hsc_phs/fileHolder_ops_MC_H64ASTR_P60ASTR_S61ASTR_RP #hcss.phs.fileHolder=/home/hsc_phs/fileHolder_ops_MC_H62ASTR_P59ASTR_S61ASTR_RP #hcss.phs.fileHolder=/home/hsc_phs/fileHolder_ops_MC_H61_P58_S60_CAL hcss.phs.fileHolder=/home/hsc_phs/fileHolder_ops_MC_H63_P60_S61_CAL Finally Restart the Test Jboss. > startJbossTest DONE. LOGOUT OF THE JBOSS MACHINE. YOU ARE FINISHED WITH THIS LOG FILE.