HIFI Cycle 26 Cal and MC delivery HIFI Delivery note - 14th October 2010 Dear HSC Colleagues, First of all apologies for the delay in delivering this. This e-mail is to notify you that HIFI ICC has just uploaded the tar file containing the delivery of HIFI observations for cycle 26 onto the CVS server. It corresponds to HIFI MC H59. 1. Delivery file, directory: a) OD tar file names: - CYCLE26_HIFI_FULL_1_20101014.tar b) CVS server directory: - develop/data/observingmodes/rp_cycles/cycle026 2. Mission Configurations: a) Does this delivery include a new Calibration Mission configuration? Yes b) Does this delivery include a new Astro Mission configuration? No 3. Operations Issues a) Will any of these delivered observations generate a significant amount of Telecommands? No b) Do you wish to have these calibrations observations scheduled in the Real Time Science period of the DTCP? Not a requirement. c) ICC to add anything specific to this OD which HSC & MOC should be aware of: Instructions are in the Readme file. Note that this MC assumes usage of the new OBSW 6.4.2. Please acknowledge receipt of the e-mail and the delivery. Best regards, David Take Note of the Tar File & the New MC name (for MPS email and for steps below) CYCLE26_HIFI_FULL_1_20101014.tar (note wrong name in delivery note) (Note: Name given in delivery note is incorrect - checked on CVS server) New MC - MC H59_Cal 2. Software used for import + Source the Environment (if not already done!!) HCSS SOFTWARE = 2.0.1 (Always use the most recent HCSS Software version) PHS SOFTWARE = 5.0.5_PHS (Always use the most recent PHS Software version) Herjbo02 - HCSS_PHS_TEST_herjbo02_0_6_6.props file & source .minimal_herjbo02 : PHS: Using BUILDNUM 534 & PHS: Using JBOSS_HOME /usr/local/software/jboss/jboss-3.2.6_0_6_5 Machines used : - heropl02 - hscphs2 for the uplink co-ord part - heropl02 - hscphs2 for the PropHandler - heropl01 - hscmps1 for the MPS - herjbo02 - hsc_phs account Source the Environment before you proceed to step 3. hscphs2@heropl02/home/hscphs2/otherSetups> source setHcssEnvironment_v2.0.1 TAKE NOTE : If there is a newer HCSS software version in the otherSetups directory then source that new version. 3. What is the Mission Configuration Name going to be?? MC_H59_P56_S60_CAL 4. Make the directories in the delivery directory and MC directory) hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle26> ls HIFI/ logs/ PACS/ SPIRE/ hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle26/HIFI> mkdir HIFI_FULL_1 This LOG file has been placed in the /logs directory and given the name Cycle026_HIFI_FULL_1.log. hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL> mkdir PACS hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL> mkdir SPIRE hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL> mkdir HIFI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL> mkdir logs hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL> ls HIFI/ logs/ PACS/ SPIRE/ 5. Copy across the contents of the PACS directory from a previous mission_config subdirectory into the equivalent subdirectories of the MC_H59_P56_S60_CAL folder. Next remove in the subfolders all files which were created when you ran the HIFI, SPIRE & PACS duration files e.g. tmp, SPIRE_cus_scipts, SPIRE_harness etc etc. PACS hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/PACS> cp /home/hscphs2/icchsc/mission_config/MC_H57_P56_S59_CAL/PACS/* . hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/PACS> ls 2createOBSMODtable4RP.sh* PACS_AOR_C020_56.aor PACS_MC_OT1_2010-07-22A_C020_56_CUS.def 2createOBSMODtable4RP.sh~* PACS_Duration_PACS_compare.txt PACS_Readme_C020_56.txt CYCLE020_PACS_FULL_2_20100723.tar PACS_Duration_PACS.txt tmp msgPacsCal_RPPhot_bandpassDirect.txt PACS_MC_OT1_2010-07-22A_C020_56_CUS_CAL.xml tmpobsmode hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/PACS> rm tmp* msg* rm: remove regular file `tmp'? y rm: remove regular file `tmpobsmode'? y rm: remove regular file `msgPacsCal_RPPhot_bandpassDirect.txt'? y hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/PACS> ls 2createOBSMODtable4RP.sh* PACS_AOR_C020_56.aor PACS_MC_OT1_2010-07-22A_C020_56_CUS_CAL.xml 2createOBSMODtable4RP.sh~* PACS_Duration_PACS_compare.txt PACS_MC_OT1_2010-07-22A_C020_56_CUS.def CYCLE020_PACS_FULL_2_20100723.tar PACS_Duration_PACS.txt PACS_Readme_C020_56.txt SPIRE hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/SPIRE> cp /home/hscphs2/icchsc/mission_config/MC_H58ASTR_P55ASTR_S60ASTR_RP/SPIRE/* . hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/SPIRE> ls CYCLE025_SPIRE_FULL_1_0_20100924.tar SPIRE_Duration.txt SPIRE_AOR_C025_60_CAL.aor SPIRE_harness_duration_summary_20100927_08h58m21s.log SPIRE_AOR_C025_60_ENG.aor SPIRE_MC_ASTR_pv86_C025_60_CUS_CAL.xml SPIRE_cus_scripts.txt SPIRE_MC_ASTR_pv86_C025_60_CUS.def SPIRE_CUS_THCP.py SPIRE_Readme_C025_60.txt 6(a) Download & Untar the delivery from the CVS into the new mission_config directory (& the delivery directory) hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle26/HIFI/HIFI_FULL_1> setenv CVSROOT :pserver:lorourke@cvs.rssd.esa.int:/services/repositories/HERSCHEL_CVS hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle26/HIFI/HIFI_FULL_1> cvs login Logging in to :pserver:lorourke@cvs.rssd.esa.int:2401/services/repositories/HERSCHEL_CVS CVS password: hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle26/HIFI/HIFI_FULL_1> cvs co develop/data/observingmodes/rp_cycles/cycle026/CYCLE026_HIFI_FULL_1_20101014.tar U develop/data/observingmodes/rp_cycles/cycle026/CYCLE026_HIFI_FULL_1_20101014.tar hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle26/HIFI/HIFI_FULL_1> cp develop/data/observingmodes/rp_cycles/cycle026/CYCLE026_HIFI_FULL_1_20101014.tar . hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle26/HIFI/HIFI_FULL_1> ls CYCLE026_HIFI_FULL_1_20101014.tar develop/ hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle26/HIFI/HIFI_FULL_1> tar -xvf CYCLE026_HIFI_FULL_1_20101014.tar duration_cal.sh HIFI_AOR_C026_59.aor HIFI_DUR_C026_59.txt HIFI_MC_R068_FULL_59_0_CUS_CAL.xml HIFI_MC_R068_FULL_59_0_CUS.def HIFI_Readme_C026_59.txt hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle26/HIFI/HIFI_FULL_1> ls CYCLE026_HIFI_FULL_1_20101014.tar HIFI_AOR_C026_59.aor HIFI_MC_R068_FULL_59_0_CUS.def develop/ HIFI_DUR_C026_59.txt HIFI_Readme_C026_59.txt duration_cal.sh* HIFI_MC_R068_FULL_59_0_CUS_CAL.xml hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle26/HIFI/HIFI_FULL_1> cp * /home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/HIFI/ cp: omitting directory `develop' hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/HIFI> ls CYCLE026_HIFI_FULL_1_20101014.tar HIFI_AOR_C026_59.aor HIFI_MC_R068_FULL_59_0_CUS_CAL.xml HIFI_Readme_C026_59.txt duration_cal.sh* HIFI_DUR_C026_59.txt HIFI_MC_R068_FULL_59_0_CUS.def 6(b) To import the old PACS delivery: #CUS #var.hcss.instrument = SPIRE var.hcss.instrument = PACS #var.hcss.instrument = HIFI hcss.cus.model = FLIGHT Check with CUSGUI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/PACS> Oct 14, 2010 4:05:41 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 4:05:44 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 4:05:48 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:05:48 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:05:48 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:05:48 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:05:49 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:05:49 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:05:49 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from PACS, specified by property hcss.cus.instrument Oct 14, 2010 4:05:58 PM herschel.cus.gui.CusEditor exit INFO: Quitting. TAKE NOTE : CONFIRM THAT PACS IS THE INSTRUMENT MODEL IN THE CUSGUI OUTPUT : CONFIRMED!!!! 6(c) Clean the CUS & Cal tables from the instrument model hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/PACS> cus -f -m "clean PACS CUS from DB" -deleteall Oct 14, 2010 4:15:08 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 4:15:08 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 4:15:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:15:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:15:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:15:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:15:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:15:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:15:17 PM herschel.cus.gui.Cus infoMessage INFO: All definitions have been deleted hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/PACS> cus -f -m "clean PACS CAL from DB" -caldeleteall Oct 14, 2010 4:17:47 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 4:17:48 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 4:17:48 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:17:48 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:17:48 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:17:48 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:17:48 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:17:48 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:17:51 PM herschel.cus.gui.Cus infoMessage INFO: All calibration tables successfully deleted TAKE NOTE : OPEN UP CUSGUI & VERIFY IT IS EMPTY i.e. No Cus scripts & No Parameter tables - VERIFIED!!! TAKE NOTE : Check HPSDB in the CUSGUI Session = hpsdb_MOC9_201003161700 - CONFIRMED!! 6(d) Import the new Instrument CUS & Cal tables into the DB Import new Mission Configuration (Version 56.0). hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/PACS> cus -m "upload PACS_MC_56Cal mission configuration" -import PACS_MC_OT1_2010-07-22A_C020_56_CUS.def -importcaltables PACS_MC_OT1_2010-07-22A_C020_56_CUS_CAL.xml Oct 14, 2010 4:19:23 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 4:19:24 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 4:19:24 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:19:24 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:19:24 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:19:24 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:19:24 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:19:24 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:19:45 PM herschel.cus.gui.Cus infoMessage INFO: Definitions successfully imported Oct 14, 2010 4:19:45 PM herschel.cus.gui.Cus infoMessage INFO: Using current directory Oct 14, 2010 4:19:45 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:19:45 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:19:45 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:19:45 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:19:45 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:19:45 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:19:54 PM herschel.cus.gui.Cus infoMessage INFO: Calibration tables successfully imported from "PACS_MC_OT1_2010-07-22A_C020_56_CUS_CAL.xml" TAKE NOTE : The file referred to at the end import message shall correspond to the file that was delivered by PACS: PACS_MC_OT1_2010-07-22A_C020_56_CUS_CAL.xml CONFIRMED!! 6(e) Run the duration script for the PACS instrument model: Open duration script (2createOBSMODtable4RP.sh) and point it to HCSS 2.0.1 hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/PACS> ./2createOBSMODtable4RP.sh PACS PACS_AOR_C020_56.aor /home/hscphs2/.hcss/Uplink_Coord_1_2.props /home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/PACS hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/PACS> ls -ls total 10968 4 -rwxr-xr-- 1 hscphs2 herschel 1538 Jul 23 18:45 2createOBSMODtable4RP.sh* 4 -rwxr-xr-- 1 hscphs2 herschel 1538 Jul 23 18:45 2createOBSMODtable4RP.sh~* 5472 -rw-r--r-- 1 hscphs2 herschel 5591040 Jul 23 15:22 CYCLE020_PACS_FULL_2_20100723.tar 4 -rw-r--r-- 1 hscphs2 herschel 80 Oct 14 16:25 msgPacsCal_RPPhot_bandpassDirect.txt 12 -rw-r--r-- 1 hscphs2 herschel 11613 Jul 23 14:55 PACS_AOR_C020_56.aor 4 -rw-r--r-- 1 hscphs2 herschel 240 Jul 23 14:56 PACS_Duration_PACS_compare.txt 4 -rw-r--r-- 1 hscphs2 herschel 240 Oct 14 16:25 PACS_Duration_PACS.txt 400 -rw-r--r-- 1 hscphs2 herschel 404091 Jul 23 14:36 PACS_MC_OT1_2010-07-22A_C020_56_CUS_CAL.xml 5048 -rw-r--r-- 1 hscphs2 herschel 5154951 Jul 23 14:36 PACS_MC_OT1_2010-07-22A_C020_56_CUS.def 8 -rw-r--r-- 1 hscphs2 herschel 5337 Jul 23 15:10 PACS_Readme_C020_56.txt 4 -rw-r--r-- 1 hscphs2 herschel 216 Oct 14 16:25 tmp 4 -rw-r--r-- 1 hscphs2 herschel 90 Oct 14 16:25 tmpobsmode hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/PACS> diff PACS_Duration_PACS_compare.txt PACS_Duration_PACS.txt Perfect. No differences! 6(f) If Durations are OK then COMMIT the Delivery with CUSGUI OPENED CUSGUI & COMMITTED (REGISTRY/COMMIT) THE PACS DELIVERY In the Comment field, refer to PACS MC P56CAL TAKE NOTE : It is very important that you commit the delivery as defined above. Now create the MC in the database hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/PACS> missetup -addconfig MC_H59_P56_S60_CAL Oct 14, 2010 4:33:43 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 4:33:44 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 4:33:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:33:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:33:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:33:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:33:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:33:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:33:44 PM herschel.ccm.tools.MissionSetup infoMessage INFO: Using database "hsc_ops_operations_tm_1@herdb02.esac.esa.int" Oct 14, 2010 4:33:53 PM herschel.ccm.tools.MissionSetup infoMessage INFO: Mission configuration "MC_H59_P56_S60_CAL" created in database "hsc_ops_operations_tm_1@herdb02.esac.esa.int" Add the commited CUS to the new MC hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/PACS> Oct 14, 2010 4:35:17 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 4:35:17 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 4:35:18 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:35:18 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:35:18 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:35:18 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:35:18 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:35:18 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:35:18 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from PACS, specified by property hcss.cus.instrument Oct 14, 2010 4:45:57 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H59_P56_S60_CAL" Oct 14, 2010 4:46:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:46:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:46:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:46:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:46:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:46:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:46:42 PM herschel.cus.gui.CusEditor exit INFO: Quitting. Steps to import the new HIFI Instrument model into the MC Set Instrument Model = HIFI Check with CUSGUI Run the duration script for the HIFI instruments Import HIFI into the new Mission Configuration 7(a) Set Instrument Model = HIFI hscphs2@heropl02/home/hscphs2/.hcss> emacs Uplink_Coord.props & #CUS #var.hcss.instrument = SPIRE #var.hcss.instrument = PACS var.hcss.instrument = HIFI hcss.cus.model = FLIGHT Check with CUSGUI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/HIFI> Oct 14, 2010 4:52:32 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 4:52:33 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 4:52:33 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:52:33 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:52:33 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:52:33 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:52:33 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:52:33 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:52:33 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from HIFI, specified by property hcss.cus.instrument Oct 14, 2010 4:53:20 PM herschel.cus.gui.CusEditor exit INFO: Quitting. TAKE NOTE : Instrument above must be HIFI if you want to work with the HIFI instrument model. - CONFIRMED!! 7(c) Clean the CUS & Cal tables from the instrument model hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/HIFI> cus -f -m "clean HIFI CUS from DB" -deleteall Oct 14, 2010 4:53:44 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 4:53:44 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 4:53:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:53:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:53:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:53:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:53:45 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:53:45 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:53:51 PM herschel.cus.gui.Cus infoMessage INFO: All definitions have been deleted hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/HIFI> cus -f -m "clean HIFI CAL from DB" -caldeleteall Oct 14, 2010 4:54:17 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 4:54:17 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 4:54:18 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:54:18 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:54:18 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:54:18 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:54:18 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:54:18 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:54:21 PM herschel.cus.gui.Cus infoMessage INFO: All calibration tables successfully deleted TAKE NOTE : OPEN UP CUSGUI & VERIFY IT IS EMPTY i.e. No Cus scripts & No Parameter tables - VERIFIED!!! TAKE NOTE : Check HPSDB in the CUSGUI Session = hpsdb_MOC9_201003161700 - CONFIRMED!! 7(d) Import the new Instrument CUS & Cal tables into the DB Import new Mission Configuration (H59Cal). hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/HIFI> cus -m "upload HIFI MC59Cal mission config" -import HIFI_MC_R068_FULL_59_0_CUS.def -importcaltables HIFI_MC_R068_FULL_59_0_CUS_CAL.xml Oct 14, 2010 4:55:40 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 4:55:41 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 4:55:41 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:55:41 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:55:41 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:55:41 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:55:41 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:55:41 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:56:00 PM herschel.cus.gui.Cus infoMessage INFO: Definitions successfully imported Oct 14, 2010 4:56:00 PM herschel.cus.gui.Cus infoMessage INFO: Using current directory Oct 14, 2010 4:56:00 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:56:00 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 4:56:00 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:56:00 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 4:56:00 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:56:00 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 4:56:06 PM herschel.cus.gui.Cus infoMessage INFO: Calibration tables successfully imported from "HIFI_MC_R068_FULL_59_0_CUS_CAL.xml" TAKE NOTE : The file referred to at the end import message shall correspond to the file that was delivered by HIFI: HIFI_MC_R068_FULL_59_0_CUS_CAL.xml CONFIRMED!! 7(e) Run the duration script for the HIFI instrument Run the duration script delivered hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/HIFI> ./duration_cal.sh HIFI_AOR_C026_59 next AOR file = HIFI_AOR_C026_59 -- mode HifiEngSetIntoPrimary -- mode HifiEngSwitchonLO -- mode HifiEng_Tsys_COP -- mode HifiEng_Vecscan_calibration_COP -- mode HifiPointProcDBS_FCal -- mode HifiPointProcDBS -- mode HifiPointProcLoadChopNoRef_FCal -- mode HifiPointProcLoadChopNoRef -- mode HifiPointModeDBS -- mode HifiPointModeFastDBS -- mode HifiPointModeFSwitch -- mode HifiPointModeFSwitchNoRef -- mode HifiPointModeLoadChop -- mode HifiPointModeLoadChopNoRef -- mode HifiPointModePositionSwitch -- mode HifiMappingModeDBSCross -- mode HifiMappingModeDBSRaster -- mode HifiMappingModeFastDBSCross -- mode HifiMappingModeFastDBSRaster -- mode HifiMappingModeFSwitchOTF -- mode HifiMappingModeFSwitchOTFNoRef -- mode HifiMappingModeLoadChopOTF -- mode HifiMappingModeLoadChopOTFNoRef -- mode HifiMappingModeOTF -- mode HifiSScanModeDBS -- mode HifiSScanModeFastDBS -- mode HifiSScanModeFSwitch -- mode HifiSScanModeFSwitchNoRef -- mode HifiSScanModeLoadChop -- mode HifiSScanModeLoadChopNoRef Total duration of HifiEngSetIntoPrimary with default parameters = 6 Total duration of HifiEngSwitchonLO with default parameters = 401 Total duration of HifiEng_Tsys_COP with default parameters = 1533 Total duration of HifiEng_Vecscan_calibration_COP with default parameters = 2529 Total duration of HifiPointProcDBS_FCal with default parameters = 159 Total duration of HifiPointProcDBS with default parameters = 157 Total duration of HifiPointProcLoadChopNoRef_FCal with default parameters = 125 Total duration of HifiPointProcLoadChopNoRef with default parameters = 123 Total duration of HifiPointModeDBS with default parameters = 157 Total duration of HifiPointModeFastDBS with default parameters = 145 Total duration of HifiPointModeFSwitch with default parameters = 180 Total duration of HifiPointModeFSwitchNoRef with default parameters = 156 Total duration of HifiPointModeLoadChop with default parameters = 147 Total duration of HifiPointModeLoadChopNoRef with default parameters = 123 Total duration of HifiPointModePositionSwitch with default parameters = 139 Total duration of HifiMappingModeDBSCross with default parameters = 497 Total duration of HifiMappingModeDBSRaster with default parameters = 233 Total duration of HifiMappingModeFastDBSCross with default parameters = 425 Total duration of HifiMappingModeFastDBSRaster with default parameters = 209 Total duration of HifiMappingModeFSwitchOTF with default parameters = 235 Total duration of HifiMappingModeFSwitchOTFNoRef with default parameters = 162 Total duration of HifiMappingModeLoadChopOTF with default parameters = 202 Total duration of HifiMappingModeLoadChopOTFNoRef with default parameters = 129 Total duration of HifiMappingModeOTF with default parameters = 168 Total duration of HifiSScanModeDBS with default parameters = 386 Total duration of HifiSScanModeFastDBS with default parameters = 338 Total duration of HifiSScanModeFSwitch with default parameters = 500 Total duration of HifiSScanModeFSwitchNoRef with default parameters = 417 Total duration of HifiSScanModeLoadChop with default parameters = 350 Total duration of HifiSScanModeLoadChopNoRef with default parameters = 285 hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/HIFI> ls -ls total 11400 5692 -rw-r--r-- 1 hscphs2 herschel 5816320 Oct 14 11:25 CYCLE026_HIFI_FULL_1_20101014.tar 4 -rwxr-xr-x 1 hscphs2 herschel 2697 Oct 14 10:37 duration_cal.sh* 160 -rw-r--r-- 1 hscphs2 herschel 157579 Oct 14 11:16 HIFI_AOR_C026_59.aor 4 -rw-r--r-- 1 hscphs2 herschel 2195 Oct 14 11:21 HIFI_DUR_C026_59.txt 2180 -rw-r--r-- 1 hscphs2 herschel 2221128 Oct 14 10:47 HIFI_MC_R068_FULL_59_0_CUS_CAL.xml 3348 -rw-r--r-- 1 hscphs2 herschel 3419962 Oct 14 10:47 HIFI_MC_R068_FULL_59_0_CUS.def 8 -rw-r--r-- 1 hscphs2 herschel 6518 Oct 14 11:22 HIFI_Readme_C026_59.txt 4 -rw-r--r-- 1 hscphs2 herschel 2195 Oct 14 16:59 summary_HIFI_AOR_C026_59.log hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/HIFI> diff HIFI_DUR_C026_59.txt summary_HIFI_AOR_C026_59.log No differences. 7(f) If Durations are OK then COMMIT the Delivery with CUSGUI OPENED CUSGUI & COMMITTED (REGISTRY/COMMIT) THE HIFI DELIVERY In the Comment field, refer to HIFI MC H59CAL TAKE NOTE : It is very important that you commit the delivery as defined above. 7(g) Import HIFI into the new Mission Configuration hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/HIFI> Oct 14, 2010 5:02:30 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 5:02:31 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 5:02:31 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:02:31 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:02:31 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:02:31 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:02:31 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:02:31 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:02:31 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from HIFI, specified by property hcss.cus.instrument Oct 14, 2010 5:02:53 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H59_P56_S60_CAL" Oct 14, 2010 5:03:09 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:03:09 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:03:09 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:03:09 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:03:09 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:03:09 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:03:30 PM herschel.cus.gui.CusEditor exit INFO: Quitting. Steps to Import the Old SPIRE Instrument model into the MC Set Instrument Model = SPIRE Check with CUSGUI Run the duration script for the PACS instrument Import into the new Mission Configuration 8(a) Set Instrument Model = SPIRE #CUS var.hcss.instrument = SPIRE #var.hcss.instrument = PACS #var.hcss.instrument = HIFI hcss.cus.model = FLIGHT Check with CUSGUI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/SPIRE> Oct 14, 2010 5:05:15 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 5:05:16 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 5:05:16 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:05:16 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:05:16 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:05:16 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:05:16 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:05:16 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:05:16 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from SPIRE, specified by property hcss.cus.instrument Oct 14, 2010 5:05:32 PM herschel.cus.gui.CusEditor exit INFO: Quitting. TAKE NOTE : CONFIRM THAT SPIRE IS THE INSTRUMENT MODEL IN THE CUSGUI OUTPUT : CONFIRMED!!!! 8(c) Clean the CUS & Cal tables from the instrument model hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/SPIRE> cus -f -m "clean SPIRE CUS from DB" -deleteall Oct 14, 2010 5:05:59 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 5:06:00 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 5:06:00 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:06:00 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:06:00 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:06:00 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:06:00 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:06:00 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:06:05 PM herschel.cus.gui.Cus infoMessage INFO: All definitions have been deleted hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/SPIRE> cus -f -m "clean SPIRE CAL from DB" -caldeleteall Oct 14, 2010 5:07:43 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 5:07:44 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 5:07:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:07:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:07:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:07:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:07:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:07:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:07:47 PM herschel.cus.gui.Cus infoMessage INFO: All calibration tables successfully deleted TAKE NOTE : OPEN UP CUSGUI & VERIFY IT IS EMPTY i.e. No Cus scripts & No Parameter tables - VERIFIED!!! TAKE NOTE : Check HPSDB in the CUSGUI Session = hpsdb_MOC9_201003161700 - CONFIRMED!! 8(d) Import the new Instrument CUS & Cal tables into the DB Import old SPIRE Mission Configuration (Version 60.0). hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/SPIRE> cus -m "upload SPIRE MC_60ASTR mission config as CAL" -import SPIRE_MC_ASTR_pv86_C025_60_CUS.def -importcaltables SPIRE_MC_ASTR_pv86_C025_60_CUS_CAL.xml Oct 14, 2010 5:11:06 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 5:11:07 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 5:11:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:11:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:11:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:11:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:11:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:11:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:11:19 PM herschel.cus.gui.Cus infoMessage INFO: Definitions successfully imported Oct 14, 2010 5:11:19 PM herschel.cus.gui.Cus infoMessage INFO: Using current directory Oct 14, 2010 5:11:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:11:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:11:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:11:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:11:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:11:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:11:22 PM herschel.cus.gui.Cus infoMessage INFO: Calibration tables successfully imported from "SPIRE_MC_ASTR_pv86_C025_60_CUS_CAL.xml" TAKE NOTE : The file referred to at the end import message shall correspond to the file that was delivered by SPIRE: SPIRE_MC_ASTR_pv86_C025_60_CUS_CAL.xml CONFIRMED!! 8(e) Run the duration script for the SPIRE instrument model: hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/SPIRE> python SPIRE_CUS_THCP.py hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/SPIRE> ls -ls total 4864 2420 -rw-r--r-- 1 hscphs2 herschel 2467840 Sep 24 16:38 CYCLE025_SPIRE_FULL_1_0_20100924.tar 16 -rw-r--r-- 1 hscphs2 herschel 15120 Sep 24 16:23 SPIRE_AOR_C025_60_CAL.aor 12 -rw-r--r-- 1 hscphs2 herschel 11937 Sep 24 16:24 SPIRE_AOR_C025_60_ENG.aor 4 -rw-r--r-- 1 hscphs2 herschel 2023 Oct 14 17:12 SPIRE_cus_scripts.txt 4 -rw-r--r-- 1 hscphs2 herschel 1174 Sep 24 16:31 SPIRE_CUS_THCP.py 8 -rw-r--r-- 1 hscphs2 herschel 5451 Sep 24 16:32 SPIRE_Duration.txt 8 -rw-rw-rw- 1 hscphs2 herschel 5451 Sep 27 08:58 SPIRE_harness_duration_summary_20100927_08h58m21s.log 8 -rw-rw-rw- 1 hscphs2 herschel 5451 Oct 14 17:15 SPIRE_harness_duration_summary_20101014_17h15m44s.log 276 -rw-r--r-- 1 hscphs2 herschel 276681 Sep 24 16:31 SPIRE_MC_ASTR_pv86_C025_60_CUS_CAL.xml 2100 -rw-r--r-- 1 hscphs2 herschel 2140168 Sep 24 16:31 SPIRE_MC_ASTR_pv86_C025_60_CUS.def 8 -rw-r--r-- 1 hscphs2 herschel 5964 Sep 24 16:33 SPIRE_Readme_C025_60.txt hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/SPIRE> diff SPIRE_Duration.txt SPIRE_harness_duration_summary_20101014_17h15m44s.log Perfect. No differences! 8(f) If Durations are OK then COMMIT the Delivery with CUSGUI OPENED CUSGUI & COMMITTED (REGISTRY/COMMIT) THE SPIRE DELIVERY In the Comment field, refer to SPIRE MC S60ASTR as CAL. TAKE NOTE : It is very important that you commit the delivery as defined above. 8(g) Import SPIRE model into new Mission Configuration hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H59_P56_S60_CAL/SPIRE> Oct 14, 2010 5:18:49 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 5:18:50 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 5:18:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:18:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:18:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:18:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:18:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:18:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:18:51 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from SPIRE, specified by property hcss.cus.instrument Oct 14, 2010 5:19:23 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H59_P56_S60_CAL" Oct 14, 2010 5:19:32 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:19:32 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:19:32 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:19:32 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:19:32 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:19:32 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:19:44 PM herschel.cus.gui.CusEditor exit INFO: Quitting. THIS ENDS THE IMPORT OF THE SPIRE INSTRUMENT MODEL INTO THE MISSION CONFIGURATION. 9.Link PropHandler to the new MC & Start PropHandler to confirm Linked Prophandler to the new Mission Config by updating the Uplink_Coord.props file in .hcss directory #Mission Configuration hcss.ccm.mission.config = MC_H59_P56_S60_CAL Source the PHS Environment for 5.0.5_phs hscphs2@heropl02/home/hscphs2/otherSetups> source setHcssEnvironment_v5.0.5_phs hscphs2@heropl02/home/hscphs2/otherSetups> Oct 14, 2010 5:22:05 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Oct 14, 2010 5:22:05 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Oct 14, 2010 5:22:06 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:22:06 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Oct 14, 2010 5:22:06 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:22:06 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Oct 14, 2010 5:22:06 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Oct 14, 2010 5:22:06 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Running CDH.getObsProgrammes() Oct 14, 2010 5:22:06 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Loading observation programmes list... Oct 14, 2010 5:22:06 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: CDH: Getting obs progs took: 23 Oct 14, 2010 5:22:06 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Loading observing modes list... Oct 14, 2010 5:22:06 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H59_P56_S60_CAL" Oct 14, 2010 5:22:09 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: CDH: Getting obs modes took: 3309 TAKE NOTE : The PropHandler Terminal log above shows that it is correctly pointing to the new Mission Configuration : CONFIRMED!! 10. Export the Hspot Files from PropHandler In PropHandler, select the Calibration pull down menu and export the HSpot files. TAKE NOTE : When the new window opens showing all the properties files, check that you have property files for SPIRE, PACS & HIFI. CONFIRMED!! Select all the files and in the new window that opens, create a new directory in /home/hscphs2/icchsc/HSpot_files/ Called the same as the Mission Confifguration: Exported all the HSpot files to this folder: hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files> mkdir MC_H59_P56_S60_CAL Example of the last entry in the log: Oct 14, 2010 5:25:12 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Writing calibration prop file:/home/hscphs2/icchsc/HSpot_files/MC_H59_P56_S60_CAL/HifiEng_Fast_LCU_HK_COPGen.prop Oct 14, 2010 5:25:12 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Writing calibration prop file:/home/hscphs2/icchsc/HSpot_files/MC_H59_P56_S60_CAL/HifiManCmdSetIntoDissipativeGen.prop 11. Do the Check for a new script for Eva Do the following: hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H59_P56_S60_CAL> ls *.prop > & MC_H59_P56_S60_CAL.txt hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H59_P56_S60_CAL> ls -ls *.txt 20 -rw-r--r-- 1 hscphs2 herschel 18026 Oct 14 17:25 MC_H59_P56_S60_CAL.txt hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H59_P56_S60_CAL> cp MC_H59_P56_S60_CAL.txt /home/hscphs2/icchsc/HSpot_files/ Now do a diff between this new txt file and the one generated with the last Mission configuration. hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files> diff MC_H57_P56_S59_CAL.txt MC_H59_P56_S60_CAL.txt 35c35 < HifiEng_Multiple_Comb_COPGen.prop --- > HifiEng_MultipleComb_COPGen.prop 152a153 > HifiPointProcDBS_FCalGen.prop If there is a difference inform Eva, Jose of the result. If there is NO difference then no need to inform Eva. One new and one changed HIFI script. Notify Eva & Jose 12. Final Jboss Activities Log into Jboss #2 herjbo02.esac.esa.int/home/hsc_phs> source .minimal_herjbo02 PHS: Using BUILDNUM 578 PHS: Using JBOSS_HOME /usr/local/software/jboss/jboss-3.2.6_0_6_5 Stop the Test Jboss : herjbo02.esac.esa.int/home/hsc_phs> stopJbossTest set old=/home/hsc_phs chdir /usr/local/software/jboss/jboss-3.2.6_0_6_5/bin if ( -f .keybind ) echo .keybind exists if ( -f .exrc ) echo .exrc exists ./shutdown.sh -s jnp://localhost:1199 Shutdown message has been posted to the server. Server shutdown may take a while - check logfiles for completion Create a directory which contains the name of the new MC : herjbo02.esac.esa.int/home/hsc_phs> mkdir fileHolder_ops_MC_H59_P56_S60_CAL copied HSpot files from the HSpot_files directory on hscphs2 to this directory TAKE NOTE : You should perform this copy from the HSpot files folder on hscphs2. - DONE : SEE BELOW hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H59_P56_S60_CAL> scp *.prop hsc_phs@herjbo02:/home/hsc_phs/fileHolder_ops_MC_H59_P56_S60_CAL/ Next update the properties file: herjbo02.esac.esa.int/home/hsc_phs/.hcss> kedit HCSS_PHS_TEST_herjbo02_0_6_6.props & [1] 3171 Update each of the fields below in the Properties file : TAKE NOTE : Double check that this is done correctly!! #MARK TIME ESTIMATOR #hcss.phs.timeEstimatorVersion=MC_H58ASTR_P55ASTR_S60ASTR_RP_100927 hcss.phs.timeEstimatorVersion=MC_H59_P56_S60_CAL_101014 #hcss.phs.timeEstimatorVersion=MC_H57_P57_S59_GYRO-100922 #hcss.ccm.mission.config = MC_H58ASTR_P55ASTR_S60ASTR_RP hcss.ccm.mission.config = MC_H59_P56_S60_CAL #hcss.ccm.mission.config = MC_H57_P57_S59_GYRO #MARK DIRECTORIES #hcss.phs.fileHolder=/home/hsc_phs/fileHolder_ops_MC_H58ASTR_P55ASTR_S60ASTR_RP hcss.phs.fileHolder=/home/hsc_phs/fileHolder_ops_MC_H59_P56_S60_CAL #hcss.phs.fileHolder=/home/hsc_phs/fileHolder_ops_MC_H57_P57_S59_GYRO Finally Restart the Test Jboss. > startJbossTest DONE. LOGOUT OF THE JBOSS MACHINE. YOU ARE FINISHED WITH THIS LOG FILE.