HIFI Cycle 23 Cal and MC delivery HIFI Delivery note - 2ndd September 2010 Dear HSC colleagues, This e-mail is to notify you that HIFI ICC has just uploaded the tar file containing the delivery of HIFI observations for cycle 23 onto the CVS server. It corresponds to HIFI MC H55. 1. Delivery file, directory: a) OD tar file names: - CYCLE23_HIFI_UPDATE_1_1_20100902.tar b) CVS server directory: - develop/data/observingmodes/rp_cycles/cycle023 2. Mission Configurations: a) Does this delivery include a new Calibration Mission configuration? Yes b) Does this delivery include a new Astro Mission configuration? No 3. Operations Issues a) Will any of these delivered observations generate a significant amount of Telecommands? No b) Do you wish to have these calibrations observations scheduled in the Real Time Science period of the DTCP? Not necessary. c) ICC to add anything specific to this OD which HSC & MOC should be aware of: See instructions in Readme file. Please acknowledge receipt of the e-mail and the delivery. Our apologies for the delay. Best regards, David Take Note of the Tar File & the New MC name (for MPS email and for steps below) CYCLE23_HIFI_FULL_1_20100902.tar (Note: Name given in delivery note is incorrect - checked on CVS server) New MC - MC H55_Cal 2. Software used for import + Source the Environment (if not already done!!) HCSS SOFTWARE = 2.0.1 (Always use the most recent HCSS Software version) PHS SOFTWARE = 5.0.5_PHS (Always use the most recent PHS Software version) Herjbo02 - HCSS_PHS_TEST_herjbo02_0_6_6.props file & source .minimal_herjbo02 : PHS: Using BUILDNUM 534 & PHS: Using JBOSS_HOME /usr/local/software/jboss/jboss-3.2.6_0_6_5 Machines used : - heropl02 - hscphs2 for the uplink co-ord part - heropl02 - hscphs2 for the PropHandler - heropl01 - hscmps1 for the MPS - herjbo02 - hsc_phs account Source the Environment before you proceed to step 3. hscphs2@heropl02/home/hscphs2/otherSetups> source setHcssEnvironment_v2.0.1 TAKE NOTE : If there is a newer HCSS software version in the otherSetups directory then source that new version. 3. What is the Mission Configuration Name going to be?? MC_H55_P56_S59_CAL 4. Make the directories in the delivery directory and MC directory) hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle21> ls HIFI/ logs/ PACS/ SPIRE/ hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle21/HIFI> mkdir HIFI_Update_1_1 This LOG file has been placed in the /logs directory and given the name Cycle023_HIFI_FULL_1.log. hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H53_P56_S57_CAL> mkdir PACS hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H53_P56_S57_CAL> mkdir SPIRE hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H53_P56_S57_CAL> mkdir HIFI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H53_P56_S57_CAL> mkdir logs hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H53_P56_S57_CAL> ls HIFI/ logs/ PACS/ SPIRE/ 5. Copy across the contents of the PACS directory from a previous mission_config subdirectory into the equivalent subdirectories of the MC_H55_P56_S59_CAL folder. Next remove in the subfolders all files which were created when you ran the HIFI, SPIRE & PACS duration files e.g. tmp, SPIRE_cus_scipts, SPIRE_harness etc etc. PACS hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/PACS> cp /home/hscphs2/icchsc/mission_config/MC_H51_P56_S57_CAL/PACS/* . hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/PACS> ls 2createOBSMODtable4RP.sh* PACS_AOR_C020_56.aor PACS_MC_OT1_2010-07-22A_C020_56_CUS.def 2createOBSMODtable4RP.sh~* PACS_Duration_PACS_compare.txt PACS_Readme_C020_56.txt CYCLE020_PACS_FULL_2_20100723.tar PACS_Duration_PACS.txt tmp msgPacsCal_RPPhot_bandpassDirect.txt PACS_MC_OT1_2010-07-22A_C020_56_CUS_CAL.xml tmpobsmode hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/PACS> rm tmp* msg* rm: remove regular file `tmp'? y rm: remove regular file `tmpobsmode'? y rm: remove regular file `msgPacsCal_RPPhot_bandpassDirect.txt'? y hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/PACS> ls 2createOBSMODtable4RP.sh* PACS_AOR_C020_56.aor PACS_MC_OT1_2010-07-22A_C020_56_CUS_CAL.xml 2createOBSMODtable4RP.sh~* PACS_Duration_PACS_compare.txt PACS_MC_OT1_2010-07-22A_C020_56_CUS.def CYCLE020_PACS_FULL_2_20100723.tar PACS_Duration_PACS.txt PACS_Readme_C020_56.txt SPIRE hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/SPIRE> cp /home/hscphs2/icchsc/mission_config/MC_H54ASTR_P55ASTR_S59ASTR_RP/SPIRE/* . hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/SPIRE> ls CYCLE023_SPIRE_FULL_1_0_20100826.tar SPIRE_Duration.txt SPIRE_AOR_C023_59_CAL.aor SPIRE_harness_duration_summary_20100827_11h06m13s.log SPIRE_AOR_C023_59_ENG.aor SPIRE_harness_duration_summary_20100827_14h03m54s.log SPIRE_cus_scripts.txt SPIRE_MC_ASTR_pv85_C023_59_CUS_CAL.xml SPIRE_CUS_THCP.py SPIRE_MC_ASTR_pv85_C023_59_CUS.def SPIRE_CUS_THCP.py~ SPIRE_Readme_C023_59.txt 6(a) Download & Untar the delivery from the CVS into the new mission_config directory (& the delivery directory) hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle23/HIFI/HIFI_FULL_1> setenv CVSROOT :pserver:lorourke@cvs.rssd.esa.int:/services/repositories/HERSCHEL_CVS hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle23/HIFI/HIFI_FULL_1> cvs login Logging in to :pserver:lorourke@cvs.rssd.esa.int:2401/services/repositories/HERSCHEL_CVS CVS password: hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle23/HIFI/HIFI_FULL_1> cvs co develop/data/observingmodes/rp_cycles/cycle023/CYCLE023_HIFI_FULL_1_20100902.tar U develop/data/observingmodes/rp_cycles/cycle023/CYCLE023_HIFI_FULL_1_20100902.tar hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle23/HIFI/HIFI_FULL_1> cp develop/data/observingmodes/rp_cycles/cycle023/CYCLE023_HIFI_FULL_1_20100902.tar . hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle23/HIFI/HIFI_FULL_1> ls CYCLE023_HIFI_FULL_1_20100902.tar develop/ hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle23/HIFI/HIFI_FULL_1> tar -xvf CYCLE023_HIFI_FULL_1_20100902.tar HIFI_AOR_C023_55.aor HIFI_DUR_C023_55.txt HIFI_MC_R065_FULL_55_0_CUS.def HIFI_MC_R065_FULL_55_0_CUS_CAL.xml HIFI_Readme_C023_55.txt duration_cal.sh hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle23/HIFI/HIFI_FULL_1> ls CYCLE023_HIFI_FULL_1_20100902.tar HIFI_AOR_C023_55.aor HIFI_MC_R065_FULL_55_0_CUS.def develop/ HIFI_DUR_C023_55.txt HIFI_Readme_C023_55.txt duration_cal.sh* HIFI_MC_R065_FULL_55_0_CUS_CAL.xml hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle23/HIFI/HIFI_FULL_1> cp * /home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/HIFI/ cp: omitting directory `develop' hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/HIFI> ls CYCLE023_HIFI_FULL_1_20100902.tar HIFI_AOR_C023_55.aor HIFI_MC_R065_FULL_55_0_CUS_CAL.xml HIFI_Readme_C023_55.txt duration_cal.sh* HIFI_DUR_C023_55.txt HIFI_MC_R065_FULL_55_0_CUS.def 6(b) To import the old PACS delivery: #CUS #var.hcss.instrument = SPIRE var.hcss.instrument = PACS #var.hcss.instrument = HIFI hcss.cus.model = FLIGHT Check with CUSGUI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/PACS> Sep 3, 2010 10:28:43 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 10:28:44 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 10:28:44 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:28:44 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:28:44 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:28:44 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:28:44 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:28:44 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:28:44 AM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from PACS, specified by property hcss.cus.instrument Sep 3, 2010 10:29:30 AM herschel.cus.gui.CusEditor exit INFO: Quitting. TAKE NOTE : CONFIRM THAT PACS IS THE INSTRUMENT MODEL IN THE CUSGUI OUTPUT : CONFIRMED!!!! 6(c) Clean the CUS & Cal tables from the instrument model hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/PACS> cus -f -m "clean PACS CUS from DB" -deleteall Sep 3, 2010 10:29:54 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 10:29:55 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 10:29:55 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:29:55 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:29:56 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:29:56 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:29:56 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:29:56 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:30:04 AM herschel.cus.gui.Cus infoMessage INFO: All definitions have been deleted hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/PACS> cus -f -m "clean PACS CAL from DB" -caldeleteall Sep 3, 2010 10:30:29 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 10:30:29 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 10:30:30 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:30:30 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:30:30 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:30:30 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:30:30 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:30:30 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:30:34 AM herschel.cus.gui.Cus infoMessage INFO: All calibration tables successfully deleted TAKE NOTE : OPEN UP CUSGUI & VERIFY IT IS EMPTY i.e. No Cus scripts & No Parameter tables - VERIFIED!!! TAKE NOTE : Check HPSDB in the CUSGUI Session = hpsdb_MOC9_201003161700 - CONFIRMED!! 6(d) Import the new Instrument CUS & Cal tables into the DB Import new Mission Configuration (Version 56.0). hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/PACS> cus -m "upload PACS_MC_56Cal mission configuration" -import PACS_MC_OT1_2010-07-22A_C020_56_CUS.def -importcaltables PACS_MC_OT1_2010-07-22A_C020_56_CUS_CAL.xml Sep 3, 2010 10:31:18 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 10:31:18 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 10:31:19 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:31:19 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:31:19 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:31:19 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:31:19 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:31:19 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:31:41 AM herschel.cus.gui.Cus infoMessage INFO: Definitions successfully imported Sep 3, 2010 10:31:41 AM herschel.cus.gui.Cus infoMessage INFO: Using current directory Sep 3, 2010 10:31:41 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:31:41 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:31:41 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:31:41 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:31:41 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:31:41 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:32:06 AM herschel.cus.gui.Cus infoMessage INFO: Calibration tables successfully imported from "PACS_MC_OT1_2010-07-22A_C020_56_CUS_CAL.xml" TAKE NOTE : The file referred to at the end import message shall correspond to the file that was delivered by PACS: PACS_MC_ASTR_OT1_2010-06-16A_C017_54_CUS_CAL.xml CONFIRMED!! 6(e) Run the duration script for the PACS instrument model: Open duration script (2createOBSMODtable4RP.sh) and point it to HCSS 2.0.1 hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H53_P56_S57_CAL/PACS> ./2createOBSMODtable4RP.sh PACS PACS_AOR_C020_56.aor /home/hscphs2/.hcss/Uplink_Coord.props /home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/PACS hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/PACS> ls -ls total 10968 4 -rwxr-xr-- 1 hscphs2 herschel 1538 Jul 23 18:45 2createOBSMODtable4RP.sh* 4 -rwxr-xr-- 1 hscphs2 herschel 1538 Jul 23 18:45 2createOBSMODtable4RP.sh~* 5472 -rw-r--r-- 1 hscphs2 herschel 5591040 Jul 23 15:22 CYCLE020_PACS_FULL_2_20100723.tar 4 -rw-r--r-- 1 hscphs2 herschel 80 Sep 3 10:34 msgPacsCal_RPPhot_bandpassDirect.txt 12 -rw-r--r-- 1 hscphs2 herschel 11613 Jul 23 14:55 PACS_AOR_C020_56.aor 4 -rw-r--r-- 1 hscphs2 herschel 240 Jul 23 14:56 PACS_Duration_PACS_compare.txt 4 -rw-r--r-- 1 hscphs2 herschel 240 Sep 3 10:34 PACS_Duration_PACS.txt 400 -rw-r--r-- 1 hscphs2 herschel 404091 Jul 23 14:36 PACS_MC_OT1_2010-07-22A_C020_56_CUS_CAL.xml 5048 -rw-r--r-- 1 hscphs2 herschel 5154951 Jul 23 14:36 PACS_MC_OT1_2010-07-22A_C020_56_CUS.def 8 -rw-r--r-- 1 hscphs2 herschel 5337 Jul 23 15:10 PACS_Readme_C020_56.txt 4 -rw-r--r-- 1 hscphs2 herschel 216 Sep 3 10:34 tmp 4 -rw-r--r-- 1 hscphs2 herschel 90 Sep 3 10:34 tmpobsmode hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/PACS> diff PACS_Duration_PACS_compare.txt PACS_Duration_PACS.txt Perfect. No differences! 6(f) If Durations are OK then COMMIT the Delivery with CUSGUI OPENED CUSGUI & COMMITTED (REGISTRY/COMMIT) THE PACS DELIVERY In the Comment field, refer to PACS MC P56CAL TAKE NOTE : It is very important that you commit the delivery as defined above. Now create the MC in the database hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/PACS> missetup -addconfig MC_H55_P56_S59_CAL Sep 3, 2010 10:37:00 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 10:37:00 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 10:37:00 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:37:00 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:37:01 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:37:01 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:37:01 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:37:01 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:37:01 AM herschel.ccm.tools.MissionSetup infoMessage INFO: Using database "hsc_ops_operations_tm_1@herdb02.esac.esa.int" Sep 3, 2010 10:37:19 AM herschel.ccm.tools.MissionSetup infoMessage INFO: Mission configuration "MC_H55_P56_S59_CAL" created in database "hsc_ops_operations_tm_1@herdb02.esac.esa.int" Add the commited CUS to the new MC hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/PACS> Sep 3, 2010 10:37:48 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 10:37:49 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 10:37:49 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:37:49 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:37:49 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:37:49 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:37:49 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:37:49 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:37:49 AM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from PACS, specified by property hcss.cus.instrument Sep 3, 2010 10:38:05 AM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H55_P56_S59_CAL" Sep 3, 2010 10:38:25 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:38:25 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:38:25 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:38:25 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:38:25 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:38:25 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:38:47 AM herschel.cus.gui.CusEditor exit INFO: Quitting. Steps to import the new HIFI Instrument model into the MC Set Instrument Model = HIFI Check with CUSGUI Run the duration script for the HIFI instruments Import HIFI into the new Mission Configuration 7(a) Set Instrument Model = HIFI hscphs2@heropl02/home/hscphs2/.hcss> emacs Uplink_Coord.props & #CUS #var.hcss.instrument = SPIRE #var.hcss.instrument = PACS var.hcss.instrument = HIFI hcss.cus.model = FLIGHT Check with CUSGUI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/HIFI> Sep 3, 2010 10:39:42 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 10:39:43 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 10:39:43 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:39:43 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:39:44 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:39:44 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:39:44 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:39:44 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:39:44 AM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from HIFI, specified by property hcss.cus.instrument Sep 3, 2010 10:40:06 AM herschel.cus.gui.CusEditor exit INFO: Quitting. TAKE NOTE : Instrument above must be HIFI if you want to work with the HIFI instrument model. - CONFIRMED!! 7(c) Clean the CUS & Cal tables from the instrument model hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/HIFI> cus -f -m "clean HIFI CUS from DB" -deleteall Sep 3, 2010 10:40:33 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 10:40:33 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 10:40:34 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:40:34 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:40:34 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:40:34 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:40:34 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:40:34 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:40:41 AM herschel.cus.gui.Cus infoMessage INFO: All definitions have been deleted hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/HIFI> cus -f -m "clean HIFI CAL from DB" -caldeleteall Sep 3, 2010 10:41:05 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 10:41:05 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 10:41:06 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:41:06 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:41:06 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:41:06 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:41:06 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:41:06 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:41:10 AM herschel.cus.gui.Cus infoMessage INFO: All calibration tables successfully deleted TAKE NOTE : OPEN UP CUSGUI & VERIFY IT IS EMPTY i.e. No Cus scripts & No Parameter tables - VERIFIED!!! TAKE NOTE : Check HPSDB in the CUSGUI Session = hpsdb_MOC9_201003161700 - CONFIRMED!! 7(d) Import the new Instrument CUS & Cal tables into the DB Import new Mission Configuration (H55Cal). hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/HIFI> cus -m "upload HIFI MC55Cal mission config" -import HIFI_MC_R065_FULL_55_0_CUS.def -importcaltables HIFI_MC_R065_FULL_55_0_CUS_CAL.xml Sep 3, 2010 10:43:54 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 10:43:55 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 10:43:55 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:43:55 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:43:55 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:43:56 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:43:56 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:43:56 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:44:15 AM herschel.cus.gui.Cus infoMessage INFO: Definitions successfully imported Sep 3, 2010 10:44:15 AM herschel.cus.gui.Cus infoMessage INFO: Using current directory Sep 3, 2010 10:44:15 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:44:15 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 10:44:15 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:44:15 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 10:44:15 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:44:15 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 10:44:26 AM herschel.cus.gui.Cus infoMessage INFO: Calibration tables successfully imported from "HIFI_MC_R065_FULL_55_0_CUS_CAL.xml" TAKE NOTE : The file referred to at the end import message shall correspond to the file that was delivered by HIFI: HIFI_MC_R065_FULL_55_0_CUS_CAL.xml CONFIRMED!! 7(e) Run the duration script for the HIFI instrument Run the duration script delivered hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/HIFI> ./duration_cal.sh HIFI_AOR_C023_55 next AOR file = HIFI_AOR_C023_55 -- mode HifiEngOBS_SEU_check -- mode HifiEngSetFromNormal_IntoDissipative_II -- mode HifiPointModeDBS -- mode HifiPointModeFastDBS -- mode HifiPointModeFSwitch -- mode HifiPointModeFSwitchNoRef -- mode HifiPointModeLoadChop -- mode HifiPointModeLoadChopNoRef -- mode HifiPointModePositionSwitch Total duration of HifiEngOBS_SEU_check with default parameters = 19 Total duration of HifiEngSetFromNormal_IntoDissipative_II with default parameters = 63 Total duration of HifiPointModeDBS with default parameters = 157 Total duration of HifiPointModeFastDBS with default parameters = 145 Total duration of HifiPointModeFSwitch with default parameters = 180 Total duration of HifiPointModeFSwitchNoRef with default parameters = 156 Total duration of HifiPointModeLoadChop with default parameters = 147 Total duration of HifiPointModeLoadChopNoRef with default parameters = 123 Total duration of HifiPointModePositionSwitch with default parameters = 139 hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/HIFI> ls -ls total 11076 5532 -rw-r--r-- 1 hscphs2 herschel 5652480 Sep 2 15:27 CYCLE023_HIFI_FULL_1_20100902.tar 4 -rwxr-xr-x 1 hscphs2 herschel 2697 Aug 2 17:36 duration_cal.sh* 32 -rw-r--r-- 1 hscphs2 herschel 29848 Sep 2 11:14 HIFI_AOR_C023_55.aor 4 -rw-r--r-- 1 hscphs2 herschel 225 Sep 2 13:02 HIFI_DUR_C023_55.txt 2180 -rw-r--r-- 1 hscphs2 herschel 2221363 Aug 30 19:24 HIFI_MC_R065_FULL_55_0_CUS_CAL.xml 3316 -rw-r--r-- 1 hscphs2 herschel 3387374 Aug 30 19:23 HIFI_MC_R065_FULL_55_0_CUS.def 4 -rw-r--r-- 1 hscphs2 herschel 2957 Sep 2 15:23 HIFI_Readme_C023_55.txt 4 -rw-r--r-- 1 hscphs2 herschel 663 Sep 3 10:48 summary_HIFI_AOR_C023_55.log hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/HIFI> diff HIFI_DUR_C023_55.txt summary_HIFI_AOR_C023_55.log 2c2 < Total duration of HifiEng_SEU_check with default parameters = 19 --- > Total duration of HifiEngOBS_SEU_check with default parameters = 19 4c4,10 < Total duration of HifiPointModeFastDBS with default parameters = 142 --- > Total duration of HifiPointModeDBS with default parameters = 157 > Total duration of HifiPointModeFastDBS with default parameters = 145 > Total duration of HifiPointModeFSwitch with default parameters = 180 > Total duration of HifiPointModeFSwitchNoRef with default parameters = 156 > Total duration of HifiPointModeLoadChop with default parameters = 147 > Total duration of HifiPointModeLoadChopNoRef with default parameters = 123 > Total duration of HifiPointModePositionSwitch with default parameters = 139 Differences seen. Query with David Teyssier. Hello Mark, Apologies indeed, the error is on my side, the archive was built with a wrong duration output file (all was done remote at SRON from Maynooth). The correct file is attached, but if you prefer I can also put an updated tar file on the CVS. Sorry for the inconvenience, Cheers David Repeat with new duration file hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/HIFI> ./duration_cal.sh HIFI_AOR_C023_55 next AOR file = HIFI_AOR_C023_55 -- mode HifiEngOBS_SEU_check -- mode HifiEngSetFromNormal_IntoDissipative_II -- mode HifiPointModeDBS -- mode HifiPointModeFastDBS -- mode HifiPointModeFSwitch -- mode HifiPointModeFSwitchNoRef -- mode HifiPointModeLoadChop -- mode HifiPointModeLoadChopNoRef -- mode HifiPointModePositionSwitch Total duration of HifiEngOBS_SEU_check with default parameters = 19 Total duration of HifiEngSetFromNormal_IntoDissipative_II with default parameters = 63 Total duration of HifiPointModeDBS with default parameters = 157 Total duration of HifiPointModeFastDBS with default parameters = 145 Total duration of HifiPointModeFSwitch with default parameters = 180 Total duration of HifiPointModeFSwitchNoRef with default parameters = 156 Total duration of HifiPointModeLoadChop with default parameters = 147 Total duration of HifiPointModeLoadChopNoRef with default parameters = 123 Total duration of HifiPointModePositionSwitch with default parameters = 139 hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/HIFI> ls -ls total 11076 5532 -rw-r--r-- 1 hscphs2 herschel 5652480 Sep 2 15:27 CYCLE023_HIFI_FULL_1_20100902.tar 4 -rwxr-xr-x 1 hscphs2 herschel 2697 Aug 30 09:35 duration_cal.sh* 32 -rw-r--r-- 1 hscphs2 herschel 29848 Sep 2 11:14 HIFI_AOR_C023_55.aor 4 -rw-r--r-- 1 hscphs2 herschel 673 Sep 3 11:40 HIFI_DUR_C023_55.txt 2180 -rw-r--r-- 1 hscphs2 herschel 2221363 Aug 30 19:24 HIFI_MC_R065_FULL_55_0_CUS_CAL.xml 3316 -rw-r--r-- 1 hscphs2 herschel 3387374 Aug 30 19:23 HIFI_MC_R065_FULL_55_0_CUS.def 4 -rw-r--r-- 1 hscphs2 herschel 2957 Sep 2 15:23 HIFI_Readme_C023_55.txt 4 -rw-r--r-- 1 hscphs2 herschel 663 Sep 3 11:41 summary_HIFI_AOR_C023_55.log hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/HIFI> diff HIFI_DUR_C023_55.txt summary_HIFI_AOR_C023_55.log 1,10c1,10 < < Total duration of HifiEngOBS_SEU_check with default parameters = 19 < Total duration of HifiEngSetFromNormal_IntoDissipative_II with default parameters = 63 < Total duration of HifiPointModeDBS with default parameters = 157 < Total duration of HifiPointModeFastDBS with default parameters = 145 < Total duration of HifiPointModeFSwitch with default parameters = 180 < Total duration of HifiPointModeFSwitchNoRef with default parameters = 156 < Total duration of HifiPointModeLoadChop with default parameters = 147 < Total duration of HifiPointModeLoadChopNoRef with default parameters = 123 < Total duration of HifiPointModePositionSwitch with default parameters = 139 --- > > Total duration of HifiEngOBS_SEU_check with default parameters = 19 > Total duration of HifiEngSetFromNormal_IntoDissipative_II with default parameters = 63 > Total duration of HifiPointModeDBS with default parameters = 157 > Total duration of HifiPointModeFastDBS with default parameters = 145 > Total duration of HifiPointModeFSwitch with default parameters = 180 > Total duration of HifiPointModeFSwitchNoRef with default parameters = 156 > Total duration of HifiPointModeLoadChop with default parameters = 147 > Total duration of HifiPointModeLoadChopNoRef with default parameters = 123 > Total duration of HifiPointModePositionSwitch with default parameters = 139 Some extra spaces, but output is identical otherwise. 7(f) If Durations are OK then COMMIT the Delivery with CUSGUI OPENED CUSGUI & COMMITTED (REGISTRY/COMMIT) THE HIFI DELIVERY In the Comment field, refer to HIFI MC H55CAL TAKE NOTE : It is very important that you commit the delivery as defined above. 7(g) Import HIFI into the new Mission Configuration hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/HIFI> Sep 3, 2010 11:49:35 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 11:49:35 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 11:49:36 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 11:49:36 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 11:49:36 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 11:49:36 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 11:49:36 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 11:49:36 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 11:49:36 AM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from HIFI, specified by property hcss.cus.instrument Sep 3, 2010 11:49:52 AM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H55_P56_S59_CAL" Sep 3, 2010 11:50:05 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 11:50:05 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 11:50:05 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 11:50:05 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 11:50:05 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 11:50:05 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 11:50:45 AM herschel.cus.gui.CusEditor exit INFO: Quitting. Steps to Import the Old SPIRE Instrument model into the MC Set Instrument Model = SPIRE Check with CUSGUI Run the duration script for the PACS instrument Import into the new Mission Configuration 8(a) Set Instrument Model = SPIRE #CUS var.hcss.instrument = SPIRE #var.hcss.instrument = PACS #var.hcss.instrument = HIFI hcss.cus.model = FLIGHT Check with CUSGUI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/SPIRE> Sep 3, 2010 11:52:08 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 11:52:08 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 11:52:09 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 11:52:09 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 11:52:09 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 11:52:09 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 11:52:09 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 11:52:09 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 11:52:09 AM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from SPIRE, specified by property hcss.cus.instrument Sep 3, 2010 11:52:17 AM herschel.cus.gui.CusEditor exit INFO: Quitting. TAKE NOTE : CONFIRM THAT SPIRE IS THE INSTRUMENT MODEL IN THE CUSGUI OUTPUT : CONFIRMED!!!! 8(c) Clean the CUS & Cal tables from the instrument model hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/SPIRE> cus -f -m "clean SPIRE CUS from DB" -deleteall Sep 3, 2010 11:52:42 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 11:52:43 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 11:52:43 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 11:52:43 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 11:52:43 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 11:52:43 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 11:52:44 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 11:52:44 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 11:52:49 AM herschel.cus.gui.Cus infoMessage INFO: All definitions have been deleted hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/SPIRE> cus -f -m "clean SPIRE CAL from DB" -caldeleteall Sep 3, 2010 11:53:13 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 11:53:13 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 11:53:14 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 11:53:14 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 11:53:14 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 11:53:14 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 11:53:14 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 11:53:14 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 11:53:17 AM herschel.cus.gui.Cus infoMessage INFO: All calibration tables successfully deleted TAKE NOTE : OPEN UP CUSGUI & VERIFY IT IS EMPTY i.e. No Cus scripts & No Parameter tables - VERIFIED!!! TAKE NOTE : Check HPSDB in the CUSGUI Session = hpsdb_MOC9_201003161700 - CONFIRMED!! 8(d) Import the new Instrument CUS & Cal tables into the DB Import old SPIRE Mission Configuration (Version 56.0). hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/SPIRE> cus -m "upload SPIRE MC_59ASTR mission config as CAL" -import SPIRE_MC_ASTR_pv85_C023_59_CUS.def -importcaltables SPIRE_MC_ASTR_pv85_C023_59_CUS_CAL.xml Sep 3, 2010 11:55:31 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 11:55:32 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 11:55:32 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 11:55:32 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 11:55:32 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 11:55:32 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 11:55:32 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 11:55:32 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 11:55:45 AM herschel.cus.gui.Cus infoMessage INFO: Definitions successfully imported Sep 3, 2010 11:55:45 AM herschel.cus.gui.Cus infoMessage INFO: Using current directory Sep 3, 2010 11:55:45 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 11:55:45 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 11:55:45 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 11:55:45 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 11:55:45 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 11:55:45 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 11:55:52 AM herschel.cus.gui.Cus infoMessage INFO: Calibration tables successfully imported from "SPIRE_MC_ASTR_pv85_C023_59_CUS_CAL.xml" TAKE NOTE : The file referred to at the end import message shall correspond to the file that was delivered by SPIRE: SPIRE_MC_ASTR_pv85_C023_59_CUS_CAL.xml CONFIRMED!! 8(e) Run the duration script for the SPIRE instrument model: hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/SPIRE> python SPIRE_CUS_THCP.py hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/SPIRE> ls -ls total 4872 2420 -rw-r--r-- 1 hscphs2 herschel 2467840 Aug 26 18:47 CYCLE023_SPIRE_FULL_1_0_20100826.tar 12 -rw-r--r-- 1 hscphs2 herschel 11100 Aug 26 18:09 SPIRE_AOR_C023_59_CAL.aor 12 -rw-r--r-- 1 hscphs2 herschel 11937 Aug 26 18:08 SPIRE_AOR_C023_59_ENG.aor 4 -rw-r--r-- 1 hscphs2 herschel 2023 Sep 3 11:56 SPIRE_cus_scripts.txt 4 -rw-r--r-- 1 hscphs2 herschel 1203 Aug 27 13:51 SPIRE_CUS_THCP.py 4 -rw-r--r-- 1 hscphs2 herschel 1191 Aug 27 13:51 SPIRE_CUS_THCP.py~ 8 -rw-r--r-- 1 hscphs2 herschel 5451 Aug 26 18:32 SPIRE_Duration.txt 8 -rw-rw-rw- 1 hscphs2 herschel 5451 Aug 27 11:06 SPIRE_harness_duration_summary_20100827_11h06m13s.log 8 -rw-rw-rw- 1 hscphs2 herschel 5451 Aug 27 14:03 SPIRE_harness_duration_summary_20100827_14h03m54s.log 8 -rw-rw-rw- 1 hscphs2 herschel 5451 Sep 3 12:08 SPIRE_harness_duration_summary_20100903_12h08m45s.log 276 -rw-r--r-- 1 hscphs2 herschel 277205 Aug 26 18:39 SPIRE_MC_ASTR_pv85_C023_59_CUS_CAL.xml 2100 -rw-r--r-- 1 hscphs2 herschel 2140168 Aug 26 18:32 SPIRE_MC_ASTR_pv85_C023_59_CUS.def 8 -rw-r--r-- 1 hscphs2 herschel 5218 Aug 26 18:37 SPIRE_Readme_C023_59.txt hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/SPIRE> diff SPIRE_Duration.txt SPIRE_harness_duration_summary_20100903_12h08m45s.log Perfect. No differences! 8(f) If Durations are OK then COMMIT the Delivery with CUSGUI OPENED CUSGUI & COMMITTED (REGISTRY/COMMIT) THE SPIRE DELIVERY In the Comment field, refer to SPIRE MC S59ASTR as CAL. TAKE NOTE : It is very important that you commit the delivery as defined above. 8(g) Import SPIRE model into new Mission Configuration hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H55_P56_S59_CAL/SPIRE> Sep 3, 2010 12:12:32 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 12:12:33 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 12:12:33 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 12:12:33 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 12:12:33 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 12:12:33 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 12:12:34 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 12:12:34 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 12:12:34 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from SPIRE, specified by property hcss.cus.instrument Sep 3, 2010 12:13:01 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H55_P56_S59_CAL" Sep 3, 2010 12:13:13 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 12:13:13 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 12:13:13 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 12:13:13 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 12:13:13 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 12:13:13 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 12:13:42 PM herschel.cus.gui.CusEditor exit INFO: Quitting. THIS ENDS THE IMPORT OF THE SPIRE INSTRUMENT MODEL INTO THE MISSION CONFIGURATION. 9.Link PropHandler to the new MC & Start PropHandler to confirm Linked Prophandler to the new Mission Config by updating the Uplink_Coord.props file in .hcss directory #Mission Configuration hcss.ccm.mission.config = MC_H53_P56_S57_CAL Source the PHS Environment for 5.0.5_phs hscphs2@heropl02/home/hscphs2/otherSetups> source setHcssEnvironment_v5.0.5_phs hscphs2@heropl02/home/hscphs2/otherSetups> Sep 3, 2010 12:21:25 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Sep 3, 2010 12:21:26 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Sep 3, 2010 12:21:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 12:21:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Sep 3, 2010 12:21:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 12:21:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int Sep 3, 2010 12:21:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Sep 3, 2010 12:21:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n4@herdb02.esac.esa.int Running CDH.getObsProgrammes() Sep 3, 2010 12:21:27 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Loading observation programmes list... Sep 3, 2010 12:21:27 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: CDH: Getting obs progs took: 24 Sep 3, 2010 12:21:27 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Loading observing modes list... Sep 3, 2010 12:21:27 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H55_P56_S59_CAL" Sep 3, 2010 12:21:30 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: CDH: Getting obs modes took: 3253 TAKE NOTE : The PropHandler Terminal log above shows that it is correctly pointing to the new Mission Configuration : CONFIRMED!! 10. Export the Hspot Files from PropHandler In PropHandler, select the Calibration pull down menu and export the HSpot files. TAKE NOTE : When the new window opens showing all the properties files, check that you have property files for SPIRE, PACS & HIFI. CONFIRMED!! Select all the files and in the new window that opens, create a new directory in /home/hscphs2/icchsc/HSpot_files/ Called the same as the Mission Confifguration: MC_H53_P56_S57_CAL Exported all the HSpot files to this folder: hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files> mkdir MC_H55_P56_S59_CAL Example of the last entry in the log: Sep 3, 2010 12:24:54 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Writing calibration prop file:/home/hscphs2/icchsc/HSpot_files/MC_H55_P56_S59_CAL/HifiManCmdSetIntoDissipative_IIGen.prop Sep 3, 2010 12:24:54 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Writing calibration prop file:/home/hscphs2/icchsc/HSpot_files/MC_H55_P56_S59_CAL/HifiManCmdSetIntoDissipativeGen.prop 11. Do the Check for a new script for Eva Do the following: hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H53_P56_S57_CAL> ls *.prop > & MC_H55_P56_S59_CAL.txt hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H55_P56_S59_CAL> ls -ls *.txt 20 -rw-r--r-- 1 hscphs2 herschel 17931 Sep 3 12:25 MC_H55_P56_S59_CAL.txt hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H53_P56_S57_CAL> cp MC_H55_P56_S59_CAL.txt /home/hscphs2/icchsc/HSpot_files/ Now do a diff between this new txt file and the one generated with the last Mission configuration. hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files> diff MC_H53_P56_S58_CAL.txt MC_H55_P56_S59_CAL.txt 71a72,73 > HifiManCmdCopyToPMHighGen.prop > HifiManCmdCopyToPMLowGen.prop 103a106 > HifiManCmdRebootICUGen.prop If there is a difference inform Eva, Jose of the result. If there is NO difference then no need to inform Eva. Three new HIFI scripts. Notify Eva & Jose 12. Final Jboss Activities Log into Jboss #2 herjbo02.esac.esa.int/home/hsc_phs> source .minimal_herjbo02 PHS: Using BUILDNUM 578 PHS: Using JBOSS_HOME /usr/local/software/jboss/jboss-3.2.6_0_6_5 Stop the Test Jboss : herjbo02.esac.esa.int/home/hsc_phs> stopJbossTest set old=/home/hsc_phs chdir /usr/local/software/jboss/jboss-3.2.6_0_6_5/bin if ( -f .keybind ) echo .keybind exists if ( -f .exrc ) echo .exrc exists ./shutdown.sh -s jnp://localhost:1199 Shutdown message has been posted to the server. Server shutdown may take a while - check logfiles for completion Create a directory which contains the name of the new MC : herjbo02.esac.esa.int/home/hsc_phs> mkdir fileHolder_ops_MC_H55_P56_S59_CAL copied HSpot files from the HSpot_files directory on hscphs2 to this directory TAKE NOTE : You should perform this copy from the HSpot files folder on hscphs2. - DONE : SEE BELOW hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H53_P56_S57_CAL> scp *.prop hsc_phs@herjbo02:/home/hsc_phs/fileHolder_ops_MC_H55_P56_S59_CAL/ Next update the properties file: herjbo02.esac.esa.int/home/hsc_phs/.hcss> kedit HCSS_PHS_TEST_herjbo02_0_6_6.props & [1] 3171 Update each of the fields below in the Properties file : TAKE NOTE : Double check that this is done correctly!! #MARK TIME ESTIMATOR #hcss.phs.timeEstimatorVersion=MC_H54ASTR_P55ASTR_S57ASTR_RP_100810 #hcss.phs.timeEstimatorVersion=MC_H54ASTR_P55ASTR_S59ASTR_RP_100827 hcss.phs.timeEstimatorVersion=MC_H55_P56_S59_CAL_100903 #MARK MISSION CONFIG #hcss.ccm.mission.config = MC_H54ASTR_P55ASTR_S57ASTR_RP #hcss.ccm.mission.config = MC_H54ASTR_P55ASTR_S59ASTR_RP hcss.ccm.mission.config = MC_H55_P56_S59_CAL #MARK DIRECTORIES #hcss.phs.fileHolder=/home/hsc_phs/fileHolder_ops_MC_H54ASTR_P55ASTR_S57ASTR_RP #hcss.phs.fileHolder=/home/hsc_phs/fileHolder_ops_MC_H54ASTR_P55ASTR_S59ASTR_RP hcss.phs.fileHolder=/home/hsc_phs/fileHolder_ops_MC_H55_P56_S59_CAL Finally Restart the Test Jboss. > startJbossTest DONE. LOGOUT OF THE JBOSS MACHINE. YOU ARE FINISHED WITH THIS LOG FILE.