Date: ---- Wed Feb 3 11:49:54 CET 2010 Deliverer: ---------- Volker Ossenkopf Content: -------- HIFI_MC_ASTR_A0001_C008_0.txt - description HIFI_MC_ASTR_A0001_C008_0_CUS.def - CUS definitions HIFI_MC_ASTR_A0001_C008_0_CUS_CAL.xml - calibration files default-durations.dat - time estimation of all CUS definitions cus-defdur.sh - command script used to generate the durations file Configuration: -------------- MIB: HPSDB_MOC_HERSCH_CCS_issueMOC6_200911301800 HIFI CIB build 2.0 1403 (User build 2.1.0) HIFI sequencer tagged as ICC_OBSMODES_HIFI_126 (or later) Test setup: ----------- hifiphs@gaia.sron.nl Applied changes (SxRs) : ------------------------ * PHS-1261 Still bad sequencer results for OTF maps * PHS-1270 Update the AOT CUS to restrict load frequency grouping parameter in Spectral Scans to unity * PHS-1275 Wrong frequency in grouped frequency for multiple pointing cycle spectral scan * PHS-1291 Time estimate failure with HSpot 4.4 * PHS-1293 Failure of DBS cross mode with long integrations in one cycle * PHS-1297 Full band spectral scan in band 1a fails * PHS-1312 Error in cus backend preventing full spectral scans in 7a * HIFI-3120 Engineer modes at start and end of OD should handle some of the autonomous functions * HIFI-3052 Need for regular LCU checksum verification when HIFI is prime * HIFI-3088 Need for a new CUS table defining frequencies to be used for dissipative mode * HIFI-3153 Dissipative 1 should set the LOU band 0 only * HIFI-3188 New module needed to configure LOU into dissipative mode * HIFI-3187 CUS dependencies between ENG and AOT CUS * HIFI-3189 Updates to chopper settings on the redundant side * HIFI-3192 Implementation of HIFI-3069 prevents execution of most CoP eng modes * HIFI-3230 Delay for tuning macro in dissipative eng mode should use switch-on value * HIFI-3231 LCU mode error in transition from prime to dissipative_II * HIFI-3256 Allow for longer settling time in LO tuning preamble * HIFI-3259 AOT messages in HSPOT polluted by LO warnings * Updated configuration files for redundant settings and new LCU safety tables