HIFI PSP Mission Configuration delivery
1. Delivery note from HIFI: 05 February 2010 (for PSP)
Michael Olberg:
This is where Volker claims to have placed the MC:
CVSROOT/develop/data/observingmodes/rp_cycles/cycle008/CYCLE008_HIFI_FULL_1_0_20100203.tar
and this is what Volker has to say about the naming he used, I welcome any comments from
you on this issue as we are still learning ;-). Is it the _0_ part that should have been
_25_ here?
CC_MC_ASTR_ICCMC_CNNN_X_CUS.def
ICC_MC_ASTR_ICCMC_CNNN_X_CUS_CAL.xml
where ICC = SPIRE, PACS or HIFI
MC = Mission Configuration
ASTR is an astronomer delivery
ICCMC = the ICC Internal mission config name (shortened so it can be recognisable by
you)
CNNN = the cycle to which the delivery is being made
Which I read as a naming scheme that I have to use for the observer's
deliveries:
HIFI_MC_ASTR_A0001_C008_0_CUS_CAL.xml
HIFI_MC_ASTR_A0001_C008_0_CUS.def
The A0001 is our internal revision number which is the matter of
debate. In the way Kevin manages the configurations, there are
two different counters for CAL and ASTR. If we need subsequent numbers
for CAL and ASTR, then this is a problem. Maybe I only misread the
naming scheme ...(?)
Take Note of the Tar File & the New MC name (for MPS email and for steps below)
CYCLE008_HIFI_FULL_1_0_20100203.tar
New MCs - MC H25ASTR .
2. Software used for import + Source the Environment (if not already done!!)
HCSS SOFTWARE = 2.0.1
Herjbo02 - HCSS_PHS_TEST_herjbo02_0_6_6.props file & source
.minimal_herjbo02 : PHS: Using BUILDNUM 578 & PHS: Using JBOSS_HOME
/usr/local/software/jboss/jboss-3.2.6_0_6_5
Machines used :
- heropl02 - hscphs2 for the uplink co-ord part
- heropl02 - hscphs2 for the PropHandler
- heropl01 - hscmps1 for the MPS
- herjbo02 - hsc_phs account
If the Environment has not yet been sourced then source it!!
hscphs2@heropl02/home/hscphs2/otherSetups> source setHcssEnvironment_v2.0.1
3. What is the New Mission Configuration Name going to be??
Go to the mission_config directory and do an ls -ltr to see what is the last
Mission Configuration generated.
Take note also of the last email sent to the MPS group which contains the
name and confirm it is the same name.
Last Mission Config = MC_HPhase3_P42ASTR_S46ASTR_RP
The new Mission Configuration name shall be
MC_H25ASTR_P42ASTR_S46ASTR_RP
4. Make the directories in the /icchsc/mission_config (& in the delivery
directory)
Make the directory MC_HPhase3_P42ASTR_S46ASTR_RP in the /icchsc/mission_config directory.
Within this directory create the subdirectories : SPIRE, PACS, HIFI & logs
hscphs2@heropl02/home/hscphs2/icchsc/mission_config> mkdir MC_H25ASTR_P42ASTR_S46ASTR_RP
hscphs2@heropl02/home/hscphs2/icchsc/mission_config> cd MC_H25ASTR_P42ASTR_S46ASTR_RP
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP> mkdir HIFI
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP> mkdir PACS
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP> mkdir SPIRE
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP> mkdir logs
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP> cd logs
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP> ls
HIFI/ logs/ PACS/ SPIRE/
This LOG file has been placed in the /logs directory and given the name
MC_H25ASTR_P42ASTR_S46ASTR_RP.log
5. Copy across the contents of the SPIRE & PACS directory from a previous
mission_config subdirectory intothe equivalent subdirectories of the MC_H25ASTR_P42ASTR_S46ASTR_RP folder.
Next remove in the PACS & SPIRE subfolders all files which were created when
you ran the SPIRE & PACS duration files e.g. tmp, SPIRE_cus_scipts, SPIRE_harness etc etc.
SPIRE
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP> cd SPIRE
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/SPIRE> cp /home/hscphs2/icchsc/mission_config/MC_HPhase3_P42ASTR_S46ASTR_RP/SPIRE/* .
[1] + Running nedit MC_H25ASTR_P42ASTR_S46ASTR_RP.log
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/SPIRE> ls
CYCLE008_SPIRE_UPDATE_1_1_20100202.tar SPIRE_MC_ASTR_pv67_C008_46_CUS_CAL.xml
SPIRE_cus_scripts.txt SPIRE_MC_ASTR_pv67_C008_46_CUS.def
SPIRE_CUS_THCP.py SPIRE_MC_pv68_C008_47_CUS_CAL.xml
SPIRE_Duration_46.txt SPIRE_MC_pv68_C008_47_CUS.def
SPIRE_Duration.txt SPIRE_Readme_C008_46.txt
SPIRE_harness_duration_summary_20100203_15h28m25s.log SPIRE_Readme_C008_47.txt
PACS
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP> cd PACS
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/PACS> cp /home/hscphs2/icchsc/mission_config/MC_HPhase3_P42ASTR_S45ASTR_RP/PACS/* .
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/PACS> ls
2createOBSMODtable4RP.sh* msgPacsRangeSpec.txt PACS_MC_ASTR_CalPhase_2010-01-26A_C008_42_CUS_CAL.xml
CYCLE008_PACS_FULL_1_20100129.tar PACS_AOR_C008_42.aor PACS_MC_ASTR_CalPhase_2010-01-26A_C008_42_CUS.def
msgPacsCal_PacsRangeSpec_PV.txt PACS_Duration_PACS_compare.txt PACS_Readme_C008_42.txt
msgPacsLineSpec.txt PACS_Duration_PACS_old.txt tmp
msgPacsPhoto.txt PACS_Duration_PACS.txt tmpobsmode
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/PACS> rm msg* PACS_Dur* tmp*
rm: remove regular file `msgPacsCal_PacsRangeSpec_PV.txt'? y
rm: remove regular file `msgPacsLineSpec.txt'? y
rm: remove regular file `msgPacsPhoto.txt'? y
rm: remove regular file `msgPacsRangeSpec.txt'? y
rm: remove regular file `PACS_Duration_PACS_compare.txt'? y
rm: remove regular file `PACS_Duration_PACS_old.txt'? y
rm: remove regular file `PACS_Duration_PACS.txt'? y
rm: remove regular file `tmp'? y
rm: remove regular file `tmpobsmode'? y
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/PACS> ls
2createOBSMODtable4RP.sh* PACS_MC_ASTR_CalPhase_2010-01-26A_C008_42_CUS_CAL.xml
CYCLE008_PACS_FULL_1_20100129.tar PACS_MC_ASTR_CalPhase_2010-01-26A_C008_42_CUS.def
PACS_AOR_C008_42.aor PACS_Readme_C008_42.txt
7(g) Import PACS into the new Mission Configuration
We already have the correct PACS Cus. No need to clean.
Check that PACS is defined in CusGui
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/PACS> Feb 5, 2010 12:27:46 PM herschel.share.log.util.LogInitialiser init
INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties
Feb 5, 2010 12:27:47 PM herschel.versant.store.ReplStoreFactoryImpl createStore
INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int
Feb 5, 2010 12:27:48 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:27:48 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:27:48 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:27:48 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:27:48 PM herschel.cus.gui.CusEditor chooseInstrument
INFO: Using instrument command set from PACS, specified by property hcss.cus.instrument
Feb 5, 2010 12:30:14 PM herschel.cus.gui.CusEditor exit
INFO: Quitting.
Add PACS to new MC
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/PACS> missetup -addconfig MC_H25ASTR_P42ASTR_S46ASTR_RP
Feb 5, 2010 12:32:22 PM herschel.share.log.util.LogInitialiser init
INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties
Feb 5, 2010 12:32:23 PM herschel.versant.store.ReplStoreFactoryImpl createStore
INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int
Feb 5, 2010 12:32:23 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:32:23 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:32:23 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:32:23 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:32:23 PM herschel.ccm.tools.MissionSetup infoMessage
INFO:
Using database "hsc_ops_operations_tm_1@herdb02.esac.esa.int"
Feb 5, 2010 12:32:24 PM herschel.ccm.tools.MissionSetup infoMessage
INFO: Mission configuration "MC_H25ASTR_P42ASTR_S46ASTR_RP" created in database "hsc_ops_operations_tm_1@herdb02.esac.esa.int"
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/PACS> Feb 5, 2010 12:35:41 PM herschel.share.log.util.LogInitialiser init
INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties
Feb 5, 2010 12:35:42 PM herschel.versant.store.ReplStoreFactoryImpl createStore
INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int
Feb 5, 2010 12:35:42 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:35:42 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:35:42 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:35:42 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:35:42 PM herschel.cus.gui.CusEditor chooseInstrument
INFO: Using instrument command set from PACS, specified by property hcss.cus.instrument
Feb 5, 2010 12:36:22 PM herschel.versant.ccm.MissionImpl getMissionConfiguration
INFO: Using configuration "MC_H25ASTR_P42ASTR_S46ASTR_RP"
Feb 5, 2010 12:36:35 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:36:35 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:36:35 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:36:35 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:37:08 PM herschel.cus.gui.CusEditor exit
INFO: Quitting.
6(a) To import the old SPIRE delivery:
#CUS
var.hcss.instrument = SPIRE
#var.hcss.instrument = PACS
#var.hcss.instrument = HIFI
hcss.cus.model = FLIGHT
6(b) Set the Instrument Model & check with CUSGUI
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/SPIRE> Feb 5, 2010 12:38:12 PM herschel.share.log.util.LogInitialiser init
INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties
Feb 5, 2010 12:38:13 PM herschel.versant.store.ReplStoreFactoryImpl createStore
INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int
Feb 5, 2010 12:38:14 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:38:14 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:38:14 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:38:14 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:38:14 PM herschel.cus.gui.CusEditor chooseInstrument
INFO: Using instrument command set from SPIRE, specified by property hcss.cus.instrument
Feb 5, 2010 12:38:52 PM herschel.cus.gui.CusEditor exit
INFO: Quitting.
Clean CUS & Cal and import new SPIRE MC
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/SPIRE> cus -f -m "clean SPIRE CUS from DB" -deleteall
Feb 5, 2010 12:39:19 PM herschel.share.log.util.LogInitialiser init
INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties
Feb 5, 2010 12:39:20 PM herschel.versant.store.ReplStoreFactoryImpl createStore
INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int
Feb 5, 2010 12:39:20 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:39:20 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:39:20 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:39:20 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:39:28 PM herschel.cus.gui.Cus infoMessage
INFO: All definitions have been deleted
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/SPIRE> cus -f -m "clean SPIRE CAL from DB" -caldeleteall
Feb 5, 2010 12:39:33 PM herschel.share.log.util.LogInitialiser init
INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties
Feb 5, 2010 12:39:33 PM herschel.versant.store.ReplStoreFactoryImpl createStore
INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int
Feb 5, 2010 12:39:34 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:39:34 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:39:34 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:39:34 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:39:39 PM herschel.cus.gui.Cus infoMessage
INFO: All calibration tables successfully deleted
Upload new CUS
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/SPIRE> cus -m "upload SPIRE_MC_46ASTR mission config" -import SPIRE_MC_ASTR_pv67_C008_46_CUS.def -importcaltables SPIRE_MC_ASTR_pv67_C008_46_CUS_CAL.xml
Feb 5, 2010 12:43:49 PM herschel.share.log.util.LogInitialiser init
INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties
Feb 5, 2010 12:43:49 PM herschel.versant.store.ReplStoreFactoryImpl createStore
INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int
Feb 5, 2010 12:43:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:43:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:43:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:43:50 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:44:05 PM herschel.cus.gui.Cus infoMessage
INFO: Definitions successfully imported
Feb 5, 2010 12:44:05 PM herschel.cus.gui.Cus infoMessage
INFO: Using current directory
Feb 5, 2010 12:44:05 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:44:05 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:44:05 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:44:05 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:44:08 PM herschel.cus.gui.Cus infoMessage
INFO: Calibration tables successfully imported from "SPIRE_MC_ASTR_pv67_C008_46_CUS_CAL.xml"
7. Run the duration script & perform a diff with the ICC_DUR file.
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/SPIRE> python SPIRE_CUS_THCP.py
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/SPIRE> ls -ls
total 8876
4424 -rw-r--r-- 1 hscphs2 herschel 4515840 Feb 3 10:36 CYCLE008_SPIRE_UPDATE_1_1_20100202.tar
4 -rw-r--r-- 1 hscphs2 herschel 1762 Feb 5 12:44 SPIRE_cus_scripts.txt
4 -rw-r--r-- 1 hscphs2 herschel 1174 Feb 2 19:06 SPIRE_CUS_THCP.py
8 -rw-r--r-- 1 hscphs2 herschel 4633 Feb 2 19:06 SPIRE_Duration_46.txt
8 -rw-r--r-- 1 hscphs2 herschel 4633 Feb 3 15:22 SPIRE_Duration.txt
8 -rw-rw-rw- 1 hscphs2 herschel 4633 Feb 3 15:28 SPIRE_harness_duration_summary_20100203_15h28m25s.log
8 -rw-rw-rw- 1 hscphs2 herschel 4633 Feb 5 12:48 SPIRE_harness_duration_summary_20100205_12h48m12s.log
260 -rw-r--r-- 1 hscphs2 herschel 261102 Feb 2 19:06 SPIRE_MC_ASTR_pv67_C008_46_CUS_CAL.xml
1928 -rw-r--r-- 1 hscphs2 herschel 1966382 Feb 2 19:06 SPIRE_MC_ASTR_pv67_C008_46_CUS.def
264 -rw-r--r-- 1 hscphs2 herschel 263819 Feb 2 19:11 SPIRE_MC_pv68_C008_47_CUS_CAL.xml
1952 -rw-r--r-- 1 hscphs2 herschel 1991912 Feb 2 19:13 SPIRE_MC_pv68_C008_47_CUS.def
4 -rw-r--r-- 1 hscphs2 herschel 3077 Feb 2 19:04 SPIRE_Readme_C008_46.txt
4 -rw-r--r-- 1 hscphs2 herschel 3141 Feb 2 19:02 SPIRE_Readme_C008_47.txt
[1] + Running nedit MC_H25ASTR_P42ASTR_S46ASTR_RP.log
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/SPIRE> diff SPIRE_Duration.txt SPIRE_harness_duration_summary_20100203_15h28m25s.log
Perfect!!!.
COMMIT delivery and import
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/SPIRE> Feb 5, 2010 12:49:46 PM herschel.share.log.util.LogInitialiser init
INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties
Feb 5, 2010 12:49:47 PM herschel.versant.store.ReplStoreFactoryImpl createStore
INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int
Feb 5, 2010 12:49:47 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:49:47 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:49:47 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:49:48 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:49:48 PM herschel.cus.gui.CusEditor chooseInstrument
INFO: Using instrument command set from SPIRE, specified by property hcss.cus.instrument
Feb 5, 2010 12:50:04 PM herschel.versant.ccm.MissionImpl getMissionConfiguration
INFO: Using configuration "MC_H25ASTR_P42ASTR_S46ASTR_RP"
Feb 5, 2010 12:50:24 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:50:24 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:50:24 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:50:24 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:50:47 PM herschel.cus.gui.CusEditor exit
INFO: Quitting.
TAKE NOTE : If you have selected the correct Mission Configuration then you can confirm this in the cusgui log as shown above.
THIS ENDS THE IMPORT OF THE OLD SPIRE INSTRUMENT MODEL INTO THE MISSION CONFIGURATION.
6. Steps to re-import the NEW HIFI Instrument model into the MC
Set Instrument Model = HIFI
Check with CUSGUI
Run the duration script for the HIFI instruments
Import HIFI into the new Mission Configuration
hscphs2@heropl02/home/hscphs2/icchsc/delivery/Calibration_Cycle8/HIFI/HIFI_FULL_1> cp * /home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/HIFI/
cp: omitting directory `develop'
6(a) Set Instrument Model = HIFI
hscphs2@heropl02/home/hscphs2/.hcss> emacs Uplink_Coord.props &
#CUS
#var.hcss.instrument = SPIRE
#var.hcss.instrument = PACS
var.hcss.instrument = HIFI
hcss.cus.model = FLIGHT
7(b) Check with CUSGUI
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP> Feb 5, 2010 12:52:06 PM herschel.share.log.util.LogInitialiser init
INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties
Feb 5, 2010 12:52:07 PM herschel.versant.store.ReplStoreFactoryImpl createStore
INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int
Feb 5, 2010 12:52:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:52:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:52:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:52:07 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:52:07 PM herschel.cus.gui.CusEditor chooseInstrument
INFO: Using instrument command set from HIFI, specified by property hcss.cus.instrument
Feb 5, 2010 12:52:22 PM herschel.cus.gui.CusEditor exit
INFO: Quitting.
TAKE NOTE : Instrument above must be HIFI if you want to work with the HIFI
instrument model. - CONFIRMED!!
7(c) Clean the CUS & Cal tables from the instrument model
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP> cus -f -m "clean HIFI CUS from DB" -deleteall
Feb 5, 2010 12:52:53 PM herschel.share.log.util.LogInitialiser init
INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties
Feb 5, 2010 12:52:54 PM herschel.versant.store.ReplStoreFactoryImpl createStore
INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int
Feb 5, 2010 12:52:54 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:52:54 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:52:54 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:52:54 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:53:05 PM herschel.cus.gui.Cus infoMessage
INFO: All definitions have been deleted
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP> cus -f -m "clean HIFI CAL from DB" -caldeleteall
Feb 5, 2010 12:53:17 PM herschel.share.log.util.LogInitialiser init
INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties
Feb 5, 2010 12:53:18 PM herschel.versant.store.ReplStoreFactoryImpl createStore
INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int
Feb 5, 2010 12:53:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:53:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 12:53:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:53:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 12:53:25 PM herschel.cus.gui.Cus infoMessage
INFO: All calibration tables successfully deleted
TAKE NOTE : OPEN UP CUSGUI & VERIFY IT IS EMPTY i.e. No Cus scripts & No Parameter tables - VERIFIED!!!
TAKE NOTE : Check HPSDB in the CUSGUI Session = hpsdb_MOC3_200908141600 - CONFIRMED!!
7(d) Import the new Instrument CUS & Cal tables into the DB
Import new Mission Configuration (Version 115 = Phase_3b).
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/HIFI> cus -m "upload HIFI H25ASTR mission config" -import HIFI_MC_ASTR_A0001_C008_0_CUS.def -importcaltables HIFI_MC_ASTR_A0001_C008_0_CUS_CAL.xml
Feb 5, 2010 1:55:18 PM herschel.share.log.util.LogInitialiser init
INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties
Feb 5, 2010 1:55:19 PM herschel.versant.store.ReplStoreFactoryImpl createStore
INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int
Feb 5, 2010 1:55:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 1:55:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 1:55:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 1:55:19 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 1:55:34 PM herschel.cus.gui.Cus infoMessage
INFO: Definitions successfully imported
Feb 5, 2010 1:55:34 PM herschel.cus.gui.Cus infoMessage
INFO: Using current directory
Feb 5, 2010 1:55:34 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 1:55:34 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 1:55:35 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 1:55:35 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 1:55:40 PM herschel.cus.gui.Cus infoMessage
INFO: Calibration tables successfully imported from "HIFI_MC_ASTR_A0001_C008_0_CUS_CAL.xml"
TAKE NOTE : The file referred to at the end import message shall correspond
to the file that was delivered by HIFI : HIFI_MC_ASTR_A0001_C008_0_CUS_CAL.xml
CONFIRMED!!
7(e) Run the duration script for the HIFI instrument
Run the duration script delivered
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/HIFI> ./cus-defdur.sh > HIFI_H25ASTR_Durations.txt
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/HIFI> ls -ls
total 5188
4 -rwxr-xr-x 1 hscphs2 herschel 675 Feb 3 11:56 cus-defdur.sh*
2580 -rw-r--r-- 1 hscphs2 herschel 2631680 Feb 3 11:59 CYCLE008_HIFI_FULL_1_0_20100203.tar
32 -rw-r--r-- 1 hscphs2 herschel 29919 Feb 3 11:56 default-durations.dat
32 -rw-r--r-- 1 hscphs2 herschel 29703 Feb 5 14:19 HIFI_H25ASTR_Durations.txt
732 -rw-r--r-- 1 hscphs2 herschel 744810 Feb 3 11:47 HIFI_MC_ASTR_A0001_C008_0_CUS_CAL.xml
1804 -rw-r--r-- 1 hscphs2 herschel 1839443 Feb 3 11:46 HIFI_MC_ASTR_A0001_C008_0_CUS.def
4 -rw-r--r-- 1 hscphs2 herschel 2145 Feb 3 11:56 HIFI_MC_ASTR_A0001_C008_0.txt
DIFF
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/HIFI> diff default-durations.dat HIFI_H25ASTR_Durations.txt
134,136c134,136
< 01-Feb-10 20:12:29.839 WARNING Cus: This mode is deprecated. Use HifiSetFromDissipative_II_IntoDissipative_I instead
< 01-Feb-10 20:12:32.094 WARNING Cus: This mode is deprecated. Use HifiEngSetFromDissipative_I_IntoDissipative_II or HifiEngSetFromNormal_IntoDissipative_II instead
< 01-Feb-10 20:12:34.390 WARNING Cus: This mode is deprecated. Use HifiEngSetFromDissipative_I_IntoDissipative_II or HifiEngSetFromNormal_IntoDissipative_II instead
---
> WARNING: This mode is deprecated. Use HifiSetFromDissipative_II_IntoDissipative_I instead
> WARNING: This mode is deprecated. Use HifiEngSetFromDissipative_I_IntoDissipative_II or HifiEngSetFromNormal_IntoDissipative_II instead
> WARNING: This mode is deprecated. Use HifiEngSetFromDissipative_I_IntoDissipative_II or HifiEngSetFromNormal_IntoDissipative_II instead
330c330
< 01-Feb-10 20:22:00.008 WARNING Cus: Invalid input parameter setting:
Band0_chopper_at_zero_block_aot is deprecated. Use Init_MSA_aot instead.
Please, change your AOR parameters.
---
> WARNING: Invalid input parameter setting:
Band0_chopper_at_zero_block_aot is deprecated. Use Init_MSA_aot instead.
Please, change your AOR parameters.
375c375
< 01-Feb-10 20:23:57.796 WARNING Cus: Deprecated block. Transition to standby1 is only supported by manual commanding
---
> WARNING: Deprecated block. Transition to standby1 is only supported by manual commanding
396,398c396,398
< 01-Feb-10 20:25:04.326 WARNING Cus: This mode is deprecated. Use HifiSetFromDissipative_II_IntoDissipative_I instead
< 01-Feb-10 20:25:07.074 WARNING Cus: This mode is deprecated. Use HifiEngSetFromDissipative_I_IntoDissipative_II or HifiEngSetFromNormal_IntoDissipative_II instead
< 01-Feb-10 20:25:09.572 WARNING Cus: This mode is deprecated. Use HifiEngSetFromDissipative_I_IntoDissipative_II or HifiEngSetFromNormal_IntoDissipative_II instead
---
> WARNING: This mode is deprecated. Use HifiSetFromDissipative_II_IntoDissipative_I instead
> WARNING: This mode is deprecated. Use HifiEngSetFromDissipative_I_IntoDissipative_II or HifiEngSetFromNormal_IntoDissipative_II instead
> WARNING: This mode is deprecated. Use HifiEngSetFromDissipative_I_IntoDissipative_II or HifiEngSetFromNormal_IntoDissipative_II instead
Differences seen.
Contact HIFI.
HIFI confirms that these differences and warnings are expected.
7(f) If Durations are OK then COMMIT the Delivery with CUSGUI
OPENED CUSGUI & COMMITTED (REGISTRY/COMMIT) THE HIFI DELIVERY
In the Comment field, refer to HIFI H25ASTR MC
TAKE NOTE : It is very important that you commit the delivery as defined above.
7(g) Import HIFI into the new Mission Configuration
Add HIFI to new MC
hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H25ASTR_P42ASTR_S46ASTR_RP/HIFI> Feb 5, 2010 5:49:25 PM herschel.share.log.util.LogInitialiser init
INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties
Feb 5, 2010 5:49:26 PM herschel.versant.store.ReplStoreFactoryImpl createStore
INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int
Feb 5, 2010 5:49:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 5:49:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 5:49:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 5:49:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 5:49:26 PM herschel.cus.gui.CusEditor chooseInstrument
INFO: Using instrument command set from HIFI, specified by property hcss.cus.instrument
Feb 5, 2010 6:05:07 PM herschel.versant.ccm.MissionImpl getMissionConfiguration
INFO: Using configuration "MC_H25ASTR_P42ASTR_S46ASTR_RP"
Feb 5, 2010 6:05:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 6:05:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 6:05:26 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 6:05:27 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 6:07:42 PM herschel.versant.ccm.MissionImpl getMissionConfiguration
INFO: Using configuration "MC_H25ASTR_P42ASTR_S46ASTR_RP"
Feb 5, 2010 6:08:12 PM herschel.cus.gui.CusEditor exit
INFO: Quitting.
9.Link PropHandler to the new MC & Start PropHandler to confirm
Linked Prophandler to the new Mission Config by updating the
Uplink_Coord.props file in .hcss directory
#Mission Configuration
hcss.ccm.mission.config = MC_H25ASTR_P42ASTR_S46ASTR_RP
Source the PHS Environment for 2.0.1
hscphs2@heropl02/home/hscphs2/otherSetups> source setHcssEnvironment_v2.0.1_phs
hscphs2@heropl02/home/hscphs2/otherSetups> Feb 5, 2010 6:11:21 PM herschel.share.log.util.LogInitialiser init
INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties
Feb 5, 2010 6:11:22 PM herschel.versant.store.ReplStoreFactoryImpl createStore
INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int
Feb 5, 2010 6:11:22 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RO-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 6:11:22 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int
Feb 5, 2010 6:11:22 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Feb 5, 2010 6:11:22 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase
INFO: Connection established to hsc_ops_operations_tm_1_n3@herdb02.esac.esa.int
Running CDH.getObsProgrammes()
Feb 5, 2010 6:11:23 PM herschel.phs.prophandler.gui.ProposalHandler message
INFO: Loading observation programmes list...
Feb 5, 2010 6:11:23 PM herschel.phs.prophandler.gui.ProposalHandler message
INFO:
CDH: Getting obs progs took: 117
Feb 5, 2010 6:11:23 PM herschel.phs.prophandler.gui.ProposalHandler message
INFO: Loading observing modes list...
Feb 5, 2010 6:11:23 PM herschel.versant.ccm.MissionImpl getMissionConfiguration
INFO: Using configuration "MC_H25ASTR_P42ASTR_S46ASTR_RP"
Feb 5, 2010 6:11:28 PM herschel.phs.prophandler.gui.ProposalHandler message
INFO:
CDH: Getting obs modes took: 5462
TAKE NOTE : The PropHandler Terminal log above shows that it is correctly
pointing to the new Mission
Configuration : CONFIRMED!!
10. Export the Hspot Files from PropHandler
In PropHandler, select the Calibration pull down menu and export the HSpot
files.
TAKE NOTE : When the new window opens showing all the properties files, check
that you have property files for SPIRE, PACS & HIFI. CONFIRMED!!
Select all the files and in the new window that opens, create a new
directory in
/home/hscphs2/icchsc/HSpot_files/
Called the same as the Mission Confifguration: MC_H25ASTR_P42ASTR_S46ASTR_RP
Exported all the HSpot files to this folder:
hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files> mkdir MC_H25ASTR_P42ASTR_S46ASTR_RP
hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files> cd MC_H25ASTR_P42ASTR_S46ASTR_RP
Example of the last entry in the log:
Feb 5, 2010 6:21:09 PM herschel.phs.prophandler.gui.ProposalHandler message
INFO: Writing calibration prop file:/home/hscphs2/icchsc/HSpot_files/HifiSScanProcLoadChopNoRefGen.prop
Feb 5, 2010 6:21:09 PM herschel.phs.prophandler.gui.ProposalHandler message
INFO: Writing calibration prop file:/home/hscphs2/icchsc/HSpot_files/HifiMappingProcFSwitchOTFNoRefGen.prop
11. Do the Check for a new script for Eva
Do the following:
hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H25ASTR_P42ASTR_S46ASTR_RP> ls *.prop > & MC_H25ASTR_P42ASTR_S46ASTR_RP.txt
hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H25ASTR_P42ASTR_S46ASTR_RP> ls -ls *.txt 16 -rw-r--r-- 1 hscphs2 herschel 13653 Feb 5 18:29 MC_H25ASTR_P42ASTR_S46ASTR_RP.txt
Now do a diff between this new txt file and the one generated with the last Mission configuration.
hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files> diff MC_H24_P40_S44_PV.txt MC_H25ASTR_P42ASTR_S46ASTR_RP.txt
2,19d1
< HifiEng_Chopper_calibration_COPGen.prop
< HifiEng_Chopper_FT1_COPGen.prop
< HifiEng_Chopper_FT2_COPGen.prop
< HifiEng_Chopper_FT3_COPGen.prop
< HifiEng_Chopper_Response_time_COPGen.prop
< HifiEng_Deflux_COPGen.prop
< HifiEng_Dip_FSW_COPGen.prop
< HifiEng_Diplexer_calibration_hotcold_COPGen.prop
< HifiEng_Diplexer_calibration_vs_D2_COPGen.prop
< HifiEng_Diplexer_Response_time_COPGen.prop
< HifiEng_diplexerscan_M1_COPGen.prop
< HifiEng_Dipscan_calibration_COPGen.prop
< HifiEng_EngInv_COPGen.prop
< HifiEng_Fast_ImixGen.prop
< HifiEng_FPU_FT_COPGen.prop
< HifiEng_FPU_FT_IVC_COPGen.prop
< HifiEng_FT_pumped_COPGen.prop
< HifiEng_FT_unpumped_COPGen.prop
22,33d3
< HifiEng_HealthMon_FTGen.prop
< HifiEng_HEB_Spectra_vs_Imix_COPGen.prop
< HifiEng_HRS_FT_COPGen.prop
< HifiEng_IF_FBk_Cal_COPGen.prop
< HifiEng_IF_FBk_COPGen.prop
< HifiEng_IF_FBk_Dip_COPGen.prop
< HifiEng_IF_FT_COPGen.prop
< HifiEng_LO_FT_COPGen.prop
< HifiEng_LO_FT_IVC_COPGen.prop
< HifiEng_LO_FT_RoutineGen.prop
< HifiEng_Parameter_Scan_COP_fineGen.prop
< HifiEng_Parameter_Scan_COPGen.prop
43d12
< HifiEng_Spur_Investigation_COPGen.prop
45,50d13
< HifiEng_Stab_COPGen.prop
< HifiEng_stability_chopped_fasthrs_FastImixGen.prop
< HifiEng_stability_IF_system_COPGen.prop
< HifiEng_standing_wave_noretune_COPGen.prop
< HifiEng_standing_wave_retune_COPGen.prop
< HifiEng_StWv_FSW_COPGen.prop
53,106d15
< HifiEng_TrendMon_FT_COPGen.prop
< HifiEng_Tsys_COPGen.prop
< HifiEng_Tsys_Vecscan_COPGen.prop
< HifiEng_UPC_FT_COPGen.prop
< HifiEng_Vecscan_calibration_COPGen.prop
< HifiEng_WBS_FT_COPGen.prop
< HifiManCmd_Chopper_closed_loop_parameter_check_opsGen.prop
< HifiManCmd_Chopper_openloop_scan_health_checkGen.prop
< HifiManCmd_Chopper_openloop_set_health_checkGen.prop
< HifiManCmd_CRC_FDIR_disableGen.prop
< HifiManCmd_CRC_FDIR_enableGen.prop
< HifiManCmd_Dump_7AH_pageGen.prop
< HifiManCmd_HIFI_global_switch_off_opsGen.prop
< HifiManCmd_HIFI_global_switch_on_opsGen.prop
< HifiManCmd_HIFI_OL_from_to_CLGen.prop
< HifiManCmd_HIFI_primary_to_standbyIIGen.prop
< HifiManCmd_HIFI_Rescue_to_switched_offGen.prop
< HifiManCmd_HIFI_Simulate_PUGen.prop
< HifiManCmd_HIFI_standbyII_to_primaryGen.prop
< HifiManCmd_HIFI_standbyII_to_standbyIGen.prop
< HifiManCmd_HIFI_standbyI_to_standbyIIGen.prop
< HifiManCmd_HIFI_SwitchedOff_to_RescueGen.prop
< HifiManCmd_ICU_RESETGen.prop
< HifiManCmd_LCU_CLERRGen.prop
< HifiManCmd_LCU_comm_FDIR_disableGen.prop
< HifiManCmd_LCU_comm_FDIR_enableGen.prop
< HifiManCmd_LCU_Full_Memory_DumpGen.prop
< HifiManCmd_LCU_lock_clearGen.prop
< HifiManCmd_LCU_RESETGen.prop
< HifiManCmd_load_bootGen.prop
< HifiManCmd_load_OBSWGen.prop
< HifiManCmd_LO_disableGen.prop
< HifiManCmd_LO_enableGen.prop
< HifiManCmd_LOU_FDIR_disableGen.prop
< HifiManCmd_LOU_FDIR_enableGen.prop
< HifiManCmd_LO_Warmup_3bGen.prop
< HifiManCmd_OBS_SFTGen.prop
< HifiManCmd_Parameter_Scan_MOISGen.prop
< HifiManCmd_patch_OBSWGen.prop
< HifiManCmd_readback_LCU_table_flightGen.prop
< HifiManCmd_recalc_LCU_checksum_flightGen.prop
< HifiManCmd_Set_HL_HeaterGen.prop
< HifiManCmdSetIntoDissipativeGen.prop
< HifiManCmdSetIntoDissipative_IGen.prop
< HifiManCmdSetIntoPrimaryGen.prop
< HifiManCmdSetIntoStandby_IGen.prop
< HifiManCmd_Stab_COP_MOISGen.prop
< HifiManCmd_Standby0_FDIR_disableGen.prop
< HifiManCmd_Standby0_FDIR_enableGen.prop
< HifiManCmd_standing_wave_noretune_MOISGen.prop
< HifiManCmd_startup_and_rebootGen.prop
< HifiManCmd_upload_LCU_patches_flight_opsGen.prop
< HifiManCmd_upload_LCU_table_flight_opsGen.prop
< HifiManCmd_write_eepromGen.prop
If there is a difference inform Eva, Jose & Larry of the result. If there is NO difference then no need to inform Eva or Larry.
Many new scripts
12. Final Jboss Activities
Log into Jboss #2
herjbo02.esac.esa.int/home/hsc_phs> source .minimal_herjbo02
PHS: Using BUILDNUM 578
PHS: Using JBOSS_HOME /usr/local/software/jboss/jboss-3.2.6_0_6_5
Stop the Test Jboss :
herjbo02.esac.esa.int/home/hsc_phs> stopJbossTest
set old=/home/hsc_phs
chdir /usr/local/software/jboss/jboss-3.2.6_0_6_5/bin
if ( -f .keybind ) echo .keybind exists
if ( -f .exrc ) echo .exrc exists
./shutdown.sh -s jnp://localhost:1199
Shutdown message has been posted to the server.
Server shutdown may take a while - check logfiles for completion
Create a directory which contains the name of the new MC :
herjbo02.esac.esa.int/home/hsc_phs> mkdir fileHolder_ops_MC_H25ASTR_P42ASTR_S46ASTR_RP
copied HSpot files from the HSpot_files directory on hscphs2 to this directory
TAKE NOTE : You should perform this copy from the HSpot files folder on hscphs2. - DONE : SEE BELOW
hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H25ASTR_P42ASTR_S45ASTR_RP> scp *.prop hsc_phs@herjbo02:/home/hsc_phs/fileHolder_ops_MC_H25ASTR_P42ASTR_S46ASTR_RP/
Next update the properties file:
herjbo02.esac.esa.int/home/hsc_phs/.hcss> kedit HCSS_PHS_TEST_herjbo02_0_6_6.props &
Update each of the fields below in the Properties file :
TAKE NOTE : Double check that this is done correctly!!
#MARK & CHIQUI TIME ESTIMATOR
hcss.phs.timeEstimatorVersion=MC_H25ASTR_P42ASTR_S46ASTR_RP_100205
#hcss.phs.timeEstimatorVersion=MC_HPhase3_P42ASTR_S43ASTR_Hybrid_RP_100202
#hcss.phs.timeEstimatorVersion=MC_H24_P42_S47_PV_100203
#MARK & CHIQUI MISSION CONFIG
hcss.ccm.mission.config = MC_H25ASTR_P42ASTR_S46ASTR_RP
#hcss.ccm.mission.config = MC_HPhase3_P42ASTR_S43ASTR_Hybrid_RP
#hcss.ccm.mission.config = MC_H24_P42_S47_PV
#MARK & CHIQUI DIRECTORIES
hcss.phs.fileHolder=/home/hsc_phs/fileHolder_ops_MC_H25ASTR_P42ASTR_S46ASTR_RP
#hcss.phs.fileHolder=/home/hsc_phs/fileHolder_ops_MC_HPhase3_P42ASTR_S43ASTR_Hybrid_RP
#hcss.phs.fileHolder=/home/hsc_phs/fileHolder_ops_MC_H24_P42_S47_PV
Finally Restart the Test Jboss.
> startJbossTest
DONE.
LOGOUT OF THE JBOSS MACHINE. YOU ARE FINISHED WITH THIS LOG FILE.