1. Delivery note from PACS: 17th August 09 Dear HSC Colleagues, This e-mail is to notify you that PACS ICC has just uploaded the delivery of PACS PV OD0101 tar file (OD0101_PACS_FULL_2_090817.tar) onto the CVS server under develop/data/observingmodes/hscpv/od101, CVS version 1.1. This delivery includes a new Mission Configuration (Version 16.0). In MPS we used the latest SIAM file 0098_0001.SIAM and the new orbit file H20090812_001.LOE. The number of TC_COUNTS in the PACS POS file is 4937. We request a gyro calibration by Flight Dynamics for OD0101 in support of the SRPE measurements during rasters and scans. The satellite has a stable pointing of at least 1h during the DTCP. The delivery contains the following Pointing Calibration blocks performed by PACS: * PVPhotCooler * PVPhotSetup_orbit_prologue * PVPhotFPG 2.6.2B: SRPE during rasters without and with gyro propagation on HIP 67419 * PVPhotFPG 2.6.4A: SRPE during scans without and with gyro propagation on HIP 67419 * PVPhotFPG 2.6.1G: APE assessment on 62 pointing stars in SAA range +1 to +30deg * PVPhotFPG 2.6.1H: repetition of the APE assessment on the same set of 62 stars, but this time targeted per range [+1,10],[+10,+20] and [+20,+30] * PVPhotFPG 2.6.2A: RPE measurement on asteroid Fortuna * PVPhotFPG 2.6.1E: SSO tracking performance on asteroid Flora * PVPhotSetup_orbit_epilogue PVPhotFPG 2.6.1G and H are a repetition of the program from OD92 when part G could only be done for 21 of 48 stars and part H failed (some stars used on OD92 had to be replaced due to non-visibility on OD101). PVPhotFPG 2.6.4A and 2.6.2A were executed on OD93, but with STR-2. Please acknowledge receipt of the e-mail and the delivery. Kind regards, Ulrich TAKE NOTE : Tar file Name OD0101_PACS_FULL_2_090817.tar & MC Name 2. Software used for import + Source the Environment (if not already done!!) HCSS SOFTWARE = 1.1.0 ------ ASSUMED TO BE OK - not checked --------------- Herjbo02 - HCSS_PHS_TEST_herjbo02_0_6_6.props file & source .minimal_herjbo02 : PHS: Using BUILDNUM 534 & PHS: Using JBOSS_HOME /usr/local/software/jboss/jboss-3.2.6_0_6_5 When Jboss checked later in the procedure I obtained: PHS: Using BUILDNUM 578 PHS: Using JBOSS_HOME /usr/local/software/jboss/jboss-3.2.6_0_6_5 ------------------------------------------------------ Machines used : - heropl02 - hscphs2 for the uplink co-ord part - heropl02 - hscphs2 for the PropHandler - heropl01 - hscmps1 for the MPS - herjbo02 - hsc_phs account If the Environment has not yet been sourced then source it!! hscphs2@heropl02/home/hscphs2/otherSetups> source setHcssEnvironment_v1.1.0 3. What is the New Mission Configuration Name going to be?? Go to the mission_config directory and do an ls -ltr to see what is the last Mission Configuration generated. Take note also of the last email sent to the MPS group which contains the name and confirm it is the same name. Last Mission Config = MC_H21_P15_S22_PV/ PACS are delivering a new MC, so the new Mission Configuration name shall be MC_H21_P16_S22_PV 4. Make the directories in the /icchsc/mission_config (& in the delivery directory) Make the directory MC_H21_P16_S22_PV in the /icchsc/mission_config directory. Within this directory create the subdirectories : SPIRE, PACS, HIFI & logs hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P15_S22_PV> ls HIFI/ logs/ PACS/ SPIRE/ This LOG file has been placed in the /logs directory and given the name MC_H21_P16_S22_PV.log. Make also the delivery directory & subdirectories. If the tar file is called OD0101_PACS_FULL_2_090817.tar Then you create a directory in /home/hscphs2/icchsc/delivery called OD0101. Within this directory you create PACS/PACS_FULL_2 subdirectories. Also create in this OD0101 directory a log file directory where the BASIC TEMPLATE Log file shall be placed. hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101> ls logs/ PACS/ hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101> cd PACS hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101/PACS> mkdir PACS_FULL_2 hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101/PACS> ls PACS_FULL_2/ hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101/PACS> cd PACS_FULL_2/ hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101/logs> ls OD101_PACS_FULL_2.log 5. Copy across the contents of the HIFI & SPIRE ICC directories from a previous mission_config subdirectory. Remove any tmp files created the last time you ran the duration scripts on those files. As the last Mission Configuration was called MC_H21_P15_S19_PV/ then go to that directory and copy across the contents of the HIFI & SPIRE subdirectories into the equivalent subdirectories of the MC_H21_P15_S20_PV folder. hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/HIFI> cp /home/hscphs2/icchsc/mission_config/MC_H21_P15_S22_PV/HIFI/*.* . hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/SPIRE> cp /home/hscphs2/icchsc/mission_config/MC_H21_P15_S22_PV/SPIRE/*.* . Next remove in the HIFI & SPIRE subfolders all files which were created when you ran the HIFI & PACS duration files e.g. tmp, SPIRE_cus_scipts, SPIRE_harness etc etc. HIFI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/HIFI> ls duration.sh* HIFI_DUR_OD0086_3_0.txt HIFI_Readme_OD0086_3_0.txt HIFI_AOR_OD0086_3_0.aor HIFI_ICP_OD0086_3_0.icp HIFI_SSF_OD0086_3_0.ssf HIFI_AOR_OD86.aor HIFI_POS_OD0086_3_0.pos OD0086_HIFI_FULL_3_20090802.tar hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P15_S22_PV/HIFI> rm summary_OD86.log rm: remove regular file `summary_OD86.log'? y hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/HIFI> ls duration.sh* HIFI_DUR_OD0086_3_0.txt HIFI_Readme_OD0086_3_0.txt HIFI_AOR_OD0086_3_0.aor HIFI_ICP_OD0086_3_0.icp HIFI_SSF_OD0086_3_0.ssf HIFI_AOR_OD86.aor HIFI_POS_OD0086_3_0.pos OD0086_HIFI_FULL_3_20090802.tar SPIRE hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/SPIRE> ls OD0100_SPIRE_FULL_1_20090817.tar SPIRE_Duration.txt SPIRE_MC_pv37_FULL_22_0_CUS.def SPIRE_AOR_OD0100_1_0.aor SPIRE_harness_duration_summary_20090817_21h43m39s.log SPIRE_POS_OD0100_1_0.pos SPIRE_cus_scripts.txt SPIRE_ICP_OD0100_1_0.icp SPIRE_Readme_OD0100_1_0.txt SPIRE_CUS_THCP.py SPIRE_MC_pv37_FULL_22_0_CUS_CAL.xml SPIRE_SSF_OD0100_1_0.ssf hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/SPIRE> rm SPIRE_harness_duration_summary_20090817_21h43m39s.log rm: remove regular file `SPIRE_harness_duration_summary_20090817_21h43m39s.log'? y hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/SPIRE> ls OD0100_SPIRE_FULL_1_20090817.tar SPIRE_CUS_THCP.py SPIRE_MC_pv37_FULL_22_0_CUS_CAL.xml SPIRE_Readme_OD0100_1_0.txt SPIRE_AOR_OD0100_1_0.aor SPIRE_Duration.txt SPIRE_MC_pv37_FULL_22_0_CUS.def SPIRE_SSF_OD0100_1_0.ssf SPIRE_cus_scripts.txt SPIRE_ICP_OD0100_1_0.icp SPIRE_POS_OD0100_1_0.pos 5. Steps to Import the new SPIRE Instrument model into a new MC Download & Untar the delivery from the CVS into the new mission_config directory (& the delivery directory) Set the Instrument Model & check with CUSGUI Clean the CUS & Cal tables from the instrument model Import the new Instrument Cus & Cal into the DB GO TO THE BASIC TEMPLATE FILE FOR THIS INSTRUMENT. Check Durations & then RETURN TO THIS TEMPLATE. If Durations are OK then COMMIT the Delivery with CUSGUI Create the new Mission Configuration name in the DB Import the New SPIRE Instrument Model into the Mission Configuration. 6(a) Download & Untar the delivery from the CVS into the new mission_config directory (& the delivery directory) hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101/PACS/PACS_FULL_2> setenv CVSROOT :pserver:lorourke@cvs.rssd.esa.int:/services/repositories/HERSCHEL_CVS hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101/PACS/PACS_FULL_2> cvs login Logging in to :pserver:lorourke@cvs.rssd.esa.int:2401/services/repositories/HERSCHEL_CVS CVS password: -delivery directory hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101/PACS/PACS_FULL_2> cvs co develop/data/observingmodes/hscpv/od101/OD0101_PACS_FULL_2_090817.tar U develop/data/observingmodes/hscpv/od101/OD0101_PACS_FULL_2_090817.tar hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101/PACS/PACS_FULL_2> cd develop/data/observingmodes/hscpv/od101/ hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101/PACS/PACS_FULL_2/develop/data/observingmodes/hscpv/od101> ls CVS/ OD0101_PACS_FULL_2_090817.tar hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101/PACS/PACS_FULL_2/develop/data/observingmodes/hscpv/od101> cp OD0101_PACS_FULL_2_090817.tar /home/hscphs2/icchsc/delivery/OD0101/PACS/PACS_FULL_2/ hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101/PACS/PACS_FULL_2/develop/data/observingmodes/hscpv/od101> cd /home/hscphs2/icchsc/delivery/OD0101/PACS/PACS_FULL_2/ hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101/PACS/PACS_FULL_2> ls develop/ OD0101_PACS_FULL_2_090817.tar hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101/PACS/PACS_FULL_2> tar -xvf OD0101_PACS_FULL_2_090817.tar PACS_MC_CoP_PV_2009-08-14A_FULL_16_0_CUS.def PACS_MC_CoP_PV_2009-08-14A_FULL_16_0_CUS_CAL.xml PACS_AOR_OD0101_2_0.aor PACS_DUR_OD0101_compare_2_0.txt PACS_POS_OD0101_2_0.pos PACS_ICP_OD0101_2_0.icp PACS_SSF_OD0101_2_0.ssf PACS_Readme_OD0101_2_0.txt 2createOBSMODtable.sh TAKE NOTE : The above steps are to be copied into the PACS BASIC TEMPLATE LOG FILE for OD101 - OK! - mission_config directory hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0098/SPIRE/SPIRE_FULL_1> cp *.* /home/hscphs2/icchsc/mission_config/MC_H21_P15_S21_PV/SPIRE/ hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P15_S21_PV/SPIRE> ls OD0098_SPIRE_FULL_1_20090816.tar SPIRE_Duration.txt SPIRE_MC_pv36_FULL_21_0_CUS.def SPIRE_SSF_OD0098_1_0.ssf SPIRE_AOR_OD0098_1_0.aor SPIRE_ICP_OD0098_1_0.icp SPIRE_POS_OD0098_1_0.pos SPIRE_CUS_THCP.py SPIRE_MC_pv36_FULL_21_0_CUS_CAL.xml SPIRE_Readme_OD0098_1_0.txt 6(b) Set the Instrument Model & check with CUSGUI Update the instrument properties in the .hcss directory hscphs2@heropl02/home/hscphs2/.hcss> emacs Uplink_Coord.props Select PACS as the instrument #Comment out next two for PACS only #hcss.mps.obdb_file = OBDB_4_0_B004_20090325.csv #hcss.mps.stpf_file = STPF_00002_20090324.csv #CUS #var.hcss.instrument = SPIRE var.hcss.instrument = PACS #var.hcss.instrument = HIFI hcss.cus.model = FLIGHT Opened cusgui hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0101/PACS/PACS_FULL_2> Aug 18, 2009 10:31:42 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Aug 18, 2009 10:31:43 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Aug 18, 2009 10:31:44 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 10:31:44 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 10:31:44 AM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from PACS, specified by property hcss.cus.instrument Aug 18, 2009 10:33:05 AM herschel.cus.gui.CusEditor exit INFO: Quitting. TAKE NOTE : CONFIRM THAT PACS IS THE INSTRUMENT MODEL IN THE CUSGUI OUTPUT : CONFIRMED!!!! 6(c) Clean the CUS & Cal tables from the instrument model hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/PACS> cus -f -m "clean PACS CUS from DB" -deleteall Aug 18, 2009 10:33:46 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Aug 18, 2009 10:33:46 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Aug 18, 2009 10:33:47 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 10:33:47 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 10:33:57 AM herschel.cus.gui.Cus infoMessage INFO: All definitions have been deleted hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/PACS> cus -f -m "clean PACS CUS from DB" -caldeleteall Aug 18, 2009 10:34:06 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Aug 18, 2009 10:34:07 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Aug 18, 2009 10:34:08 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 10:34:08 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 10:34:14 AM herschel.cus.gui.Cus infoMessage INFO: All calibration tables successfully deleted TAKE NOTE : OPEN UP CUSGUI & VERIFY IT IS EMPTY i.e. No Cus scripts & No Parameter tables - VERIFIED!!! TAKE NOTE : Check HPSDB in the CUSGUI Session = hpsdb_FM1_M_903062241 - CONFIRMED!! 6(d) Import the new Instrument CUS & Cal tables into the DB Import new Mission Configuration (Version 20.0 = pvPhase_mconfig_34). hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/PACS> cus -m "upload PACS_MC_16 mission config" -import PACS_MC_CoP_PV_2009-08-14A_FULL_16_0_CUS.def -importcaltables PACS_MC_CoP_PV_2009-08-14A_FULL_16_0_CUS_CAL.xml Aug 18, 2009 11:39:19 AM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Aug 18, 2009 11:39:20 AM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Aug 18, 2009 11:39:21 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 11:39:21 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 11:39:42 AM herschel.cus.gui.Cus infoMessage INFO: Definitions successfully imported Aug 18, 2009 11:39:42 AM herschel.cus.gui.Cus infoMessage INFO: Using current directory Aug 18, 2009 11:39:42 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 11:39:42 AM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 11:39:45 AM herschel.cus.gui.Cus infoMessage INFO: Calibration tables successfully imported from "PACS_MC_CoP_PV_2009-08-14A_FULL_16_0_CUS_CAL.xml" TAKE NOTE : The file referred to at the end import message shall correspond to the file that was delivered by PACS : PACS_MC_CoP_PV_2009-08-14A_FULL_16_0_CUS_CAL.xml CONFIRMED!! 6(e) GO TO THE BASIC TEMPLATE FILE FOR THIS INSTRUMENT. Check Durations & then RETURN TO THIS TEMPLATE. At this point, you should have open a log file for the OD101 Import for PACS i.e. OD101_PACS_FULL_2.log which is located in /icchsc/delivery/OD0101/logs directory. Go to that Log file, update it with some of the information now contained in this LOG file. Run the duration scripts in that LOG file i.e. running them against the files located in the Delivery directory. When this is successful, then you MUST come back to this step of the Procedure. Note that the Templates send you back to here also!!! If No Differences found then proceed to the Next Step. DONE. No differences found. 6(f) If Durations are OK then COMMIT the Delivery with CUSGUI OPENED CUSGUI & COMMITTED (REGISTRY/COMMIT) THE SPIRE DELIVERY In the Comment field, refer to PACS_MC_16 TAKE NOTE : It is very important that you commit the delivery as defined above. 6(g) Create the new Mission Configuration name in the DB The command to be run is : missetup -addconfig MC_H21_P16_S22_PV hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/PACS> missetup -addconfig MC_H21_P16_S22_PV Aug 18, 2009 12:04:24 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Aug 18, 2009 12:04:25 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Aug 18, 2009 12:04:25 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:04:25 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:04:25 PM herschel.ccm.tools.MissionSetup infoMessage INFO: Using database "hsc_ops_operations_tm_1@herdb02.esac.esa.int" Aug 18, 2009 12:04:26 PM herschel.ccm.tools.MissionSetup infoMessage INFO: Mission configuration "MC_H21_P16_S22_PV" created in database "hsc_ops_operations_tm_1@herdb02.esac.esa.int" TAKE NOTE : Confirm the correct Mission Config Name has been created as shown in the last line above : CONFIRMED. 6(h) Import the New PACS Instrument Model into the Mission Configuration. ADDED PACS MODEL TO THE NEW MISSION CONFIGURATION MC_H21_P16_S22_PV Run CUSGUI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/PACS> Aug 18, 2009 12:05:11 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Aug 18, 2009 12:05:12 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Aug 18, 2009 12:05:13 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:05:13 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:05:13 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from PACS, specified by property hcss.cus.instrument Aug 18, 2009 12:05:29 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H21_P16_S22_PV" Aug 18, 2009 12:05:42 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:05:42 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:05:55 PM herschel.cus.gui.CusEditor exit INFO: Quitting. TAKE NOTE : If you have selected the correct Mission Configuration then you can confirm this in the cusgui log as shown above. THIS ENDS THE IMPORT OF THE NEW PACS INSTRUMENT MODEL INTO THE MISSION CONFIGURATION. Steps to Import the OLD HIFI Instrument model into the MC Set Instrument Model = HIFI Check with CUSGUI Run the duration script for the HIFI instruments Import HIFI into the new Mission Configuration 7(a) Set Instrument Model = HIFI hscphs2@heropl02/home/hscphs2/.hcss> vi Uplink_Coord.props #Comment out next two for PACS only hcss.mps.obdb_file = OBDB_4_0_B004_20090325.csv hcss.mps.stpf_file = STPF_00002_20090324.csv #CUS #var.hcss.instrument = SPIRE #var.hcss.instrument = PACS var.hcss.instrument = HIFI hcss.cus.model = FLIGHT 7(b) Check with CUSGUI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/HIFI> cusgui & hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/HIFI> Aug 18, 2009 12:07:23 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Aug 18, 2009 12:07:23 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Aug 18, 2009 12:07:24 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:07:24 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:07:24 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from HIFI, specified by property hcss.cus.instrument Aug 18, 2009 12:07:42 PM herschel.cus.gui.CusEditor exit INFO: Quitting. TAKE NOTE : Instrument above must be HIFI if you want to work with the HIFI instrument model. - CONFIRMED!! 7(c) Run the duration script for the HIFI instrument Run the duration script for OD 86 delivered hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/HIFI> ./duration.sh 86 next OD = 86 -- mode HifiEngSetIntoPrimary -- mode HifiEngSetIntoStandby_II_Dissipate -- mode HifiEng_Spur_Investigation_COP -- mode HifiEngSScanDBS -- mode HifiEngSwitchonLO -- mode HifiMappingModeDBSCross -- mode HifiMappingModeDBSRaster -- mode HifiMappingModeFastDBSCross -- mode HifiMappingModeFastDBSRaster -- mode HifiMappingModeFSwitchOTF -- mode HifiMappingModeFSwitchOTFNoRef -- mode HifiMappingModeLoadChopOTF -- mode HifiMappingModeLoadChopOTFNoRef -- mode HifiMappingModeOTF Duration of HifiEngSetIntoPrimary with default parameters = 6 Duration of HifiEngSetIntoStandby_II_Dissipate with default parameters = 24 Duration of HifiEng_Spur_Investigation_COP with default parameters = 191 Duration of HifiEngSScanDBS with default parameters = 1074 Duration of HifiEngSwitchonLO with default parameters = 384 Duration of HifiMappingModeDBSCross with default parameters = 537 Duration of HifiMappingModeDBSRaster with default parameters = 176 Duration of HifiMappingModeFastDBSCross with default parameters = 465 Duration of HifiMappingModeFastDBSRaster with default parameters = 152 Duration of HifiMappingModeFSwitchOTF with default parameters = 109 Duration of HifiMappingModeFSwitchOTFNoRef with default parameters = 26 Duration of HifiMappingModeLoadChopOTF with default parameters = 109 Duration of HifiMappingModeLoadChopOTFNoRef with default parameters = 26 Duration of HifiMappingModeOTF with default parameters = 75 DIFF hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/HIFI> diff HIFI_DUR_OD0086_3_0.txt summary_OD86.log 0a1 > No differences. This confirms the Instrument model contents is consistent with the HIFI last Mission Configuration. 7(d) Import HIFI into the new Mission Configuration hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/HIFI> Aug 18, 2009 12:11:09 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Aug 18, 2009 12:11:10 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Aug 18, 2009 12:11:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:11:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:11:10 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from HIFI, specified by property hcss.cus.instrument Aug 18, 2009 12:11:28 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H21_P16_S22_PV" Aug 18, 2009 12:11:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:11:44 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:12:08 PM herschel.cus.gui.CusEditor exit INFO: Quitting. Steps to Import the OLD SPIRE Instrument model into the MC Set Instrument Model = SPIRE Check with CUSGUI Run the duration script for the SPIRE instrument Import into the new Mission Configuration 8(a) Set Instrument Model = SPIRE #Comment out next two for PACS only hcss.mps.obdb_file = OBDB_4_0_B004_20090325.csv hcss.mps.stpf_file = STPF_00002_20090324.csv #CUS var.hcss.instrument = SPIRE #var.hcss.instrument = PACS #var.hcss.instrument = HIFI hcss.cus.model = FLIGHT 8(b) Check with CUSGUI hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P15_S22_PV/PACS> cusgui & hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P15_S22_PV/PACS> Aug 17, 2009 7:47:09 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Aug 17, 2009 7:47:10 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Aug 17, 2009 7:47:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 17, 2009 7:47:10 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 17, 2009 7:47:10 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from PACS, specified by property hcss.cus.instrument Aug 17, 2009 7:47:33 PM herschel.cus.gui.CusEditor exit INFO: Quitting. TAKE NOTE : Instrument above must be SPIRE if you want to work with the SPIRE instrument model. - CONFIRMED!! hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/SPIRE> ls OD0100_SPIRE_FULL_1_20090817.tar SPIRE_CUS_THCP.py SPIRE_MC_pv37_FULL_22_0_CUS_CAL.xml SPIRE_Readme_OD0100_1_0.txt SPIRE_AOR_OD0100_1_0.aor SPIRE_Duration.txt SPIRE_MC_pv37_FULL_22_0_CUS.def SPIRE_SSF_OD0100_1_0.ssf SPIRE_cus_scripts.txt SPIRE_ICP_OD0100_1_0.icp SPIRE_POS_OD0100_1_0.pos 8(c) Run the duration script for the SPIRE instrument model: hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/SPIRE> ls -ls total 11472 5724 -rw-r--r-- 1 hscphs2 herschel 5847040 Aug 17 21:16 OD0100_SPIRE_FULL_1_20090817.tar 256 -rw-r--r-- 1 hscphs2 herschel 256136 Aug 17 21:01 SPIRE_AOR_OD0100_1_0.aor 4 -rw-r--r-- 1 hscphs2 herschel 1502 Aug 18 12:15 SPIRE_cus_scripts.txt 4 -rw-r--r-- 1 hscphs2 herschel 1174 Aug 17 21:05 SPIRE_CUS_THCP.py 4 -rw-r--r-- 1 hscphs2 herschel 3937 Aug 17 21:05 SPIRE_Duration.txt 4 -rw-rw-rw- 1 hscphs2 herschel 3937 Aug 18 12:18 SPIRE_harness_duration_summary_20090818_12h18m29s.log 2248 -rw-r--r-- 1 hscphs2 herschel 2292302 Aug 17 21:00 SPIRE_ICP_OD0100_1_0.icp 180 -rw-r--r-- 1 hscphs2 herschel 176995 Aug 17 21:05 SPIRE_MC_pv37_FULL_22_0_CUS_CAL.xml 1576 -rw-r--r-- 1 hscphs2 herschel 1608161 Aug 17 21:05 SPIRE_MC_pv37_FULL_22_0_CUS.def 1444 -rw-r--r-- 1 hscphs2 herschel 1474051 Aug 17 21:00 SPIRE_POS_OD0100_1_0.pos 4 -rw-r--r-- 1 hscphs2 herschel 2827 Aug 17 21:05 SPIRE_Readme_OD0100_1_0.txt 24 -rw-r--r-- 1 hscphs2 herschel 20484 Aug 17 21:00 SPIRE_SSF_OD0100_1_0.ssf hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/SPIRE> diff SPIRE_Duration.txt SPIRE_harness_duration_summary_20090818_12h18m29s.log No differences! 8(d) Import SPIRE model into new Mission Configuration hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/SPIRE> cusgui & hscphs2@heropl02/home/hscphs2/icchsc/mission_config/MC_H21_P16_S22_PV/SPIRE> Aug 18, 2009 12:19:54 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Aug 18, 2009 12:19:55 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Aug 18, 2009 12:19:55 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:19:55 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:19:55 PM herschel.cus.gui.CusEditor chooseInstrument INFO: Using instrument command set from SPIRE, specified by property hcss.cus.instrument Aug 18, 2009 12:20:11 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H21_P16_S22_PV" Aug 18, 2009 12:20:25 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:20:25 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 18, 2009 12:20:45 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H21_P16_S22_PV" Aug 18, 2009 12:20:48 PM herschel.cus.gui.CusEditor exit INFO: Quitting. 9.Link PropHandler to the new MC & Start PropHandler to confirm Linked Prophandler to the new Mission Config by updating the Uplink_Coord.props file in .hcss directory #Mission Configuration hcss.ccm.mission.config = MC_H21_P16_S22_PV Source the PHS Environment for 1.1.0 hscphs2@heropl02/home/hscphs2/otherSetups> source setHcssEnvironment_v1.1.0_phs setHcssExtLibs_csh:INFO:Variable HCSS_DIR set to [/herschel/software/hcss/hcss_1.1.0_phs/dp-core] setHcssExtLibs_csh:INFO:Start setting up variables for HCSS #1 reference platform v8.6 setHcssExtLibs_csh:INFO: Initializing HCSS_CLASSPATH for a new style build setHcssExtLibs_csh:INFO:Updating existing CLASSPATH setHcssExtLibs_csh:INFO:Loading the OS specific enhancements setHcssExtLibs_csh:INFO:- found OS type linux setHcssExtLibs_csh:INFO:- found 32 bit platform. setHcssExtLibs_csh:INFO:Finished setting up variables for HCSS #1 reference platform v8.6 hscphs2@heropl02/home/hscphs2/otherSetups> propHandler & hscphs2@heropl02/home/hscphs2/icchsc/delivery/OD0098/logs> Aug 16, 2009 8:54:20 PM herschel.share.log.util.LogInitialiser init INFO: Initialising using local log configuation file /home/hscphs2/.hcss/userlogging.properties Aug 16, 2009 8:54:21 PM herschel.versant.store.ReplStoreFactoryImpl createStore INFO: Creating ObjectStore: hsc_ops_operations_tm_1@herdb02.esac.esa.int Aug 16, 2009 8:54:21 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Using RW-Access for node: hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Aug 16, 2009 8:54:21 PM herschel.versant.store.replication.ReplicatingTransaction connectToRemoteDatabase INFO: Connection established to hsc_ops_operations_tm_1_n2@herdb02.esac.esa.int Running CDH.getObsProgrammes() Aug 16, 2009 8:54:21 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Loading observation programmes list... Aug 16, 2009 8:54:21 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: CDH: Getting obs progs took: 21 Aug 16, 2009 8:54:21 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Loading observing modes list... Aug 16, 2009 8:54:21 PM herschel.versant.ccm.MissionImpl getMissionConfiguration INFO: Using configuration "MC_H21_P15_S21_PV" TAKE NOTE : The PropHandler Terminal log above shows that it is correctly pointing to the new Mission Configuration : CONFIRMED!! 10. Export the Hspot Files from PropHandler In PropHandler, select the Calibration pull down menu and export the HSpot files. TAKE NOTE : When the new window opens showing all the properties files, check that you have property files for SPIRE, PACS & HIFI. CONFIRMED!! Select all the files and in the new window that opens, create a new directory in /home/hscphs2/icchsc/HSpot_files/ Called the same as the Mission Confifguration: MC_H21_P16_S22_PV Exported all the HSpot files to this folder: hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H21_P16_S22_PV/ Example of the last entry in the log: Aug 18, 2009 12:25:21 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Writing calibration prop file:/home/hscphs2/icchsc/HSpot_files/MC_H21_P16_S22_PV/HifiSScanModeFastDBSGen.prop Aug 18, 2009 12:25:21 PM herschel.phs.prophandler.gui.ProposalHandler message INFO: Writing calibration prop file:/home/hscphs2/icchsc/HSpot_files/MC_H21_P16_S22_PV/HifiManCmd_HIFI_Rescue_to_switched_offGen.prop 11. Do the check for a new script for Eva Do the following: hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H21_P16_S22_PV> ls *.prop > & MC_H21_P16_S22_PV.txt Now do a diff between this new txt file and the one generated with the last Mission configuration. hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files> diff MC_H21_P15_S22_PV.txt MC_H21_P16_S22_PV.txt If there is a difference inform Eva & Larry of the result. If there is NO difference then no need to inform Eva or Larry. No differences 12. Final Jboss Activities Log into Jboss #2 herjbo02.esac.esa.int/home/hsc_phs> source .minimal_herjbo02 PHS: Using BUILDNUM 578 PHS: Using JBOSS_HOME /usr/local/software/jboss/jboss-3.2.6_0_6_5 Stop the Test Jboss : herjbo02.esac.esa.int/home/hsc_phs> stopJbossTest set old=/home/hsc_phs chdir /usr/local/software/jboss/jboss-3.2.6_0_6_5/bin if ( -f .keybind ) echo .keybind exists if ( -f .exrc ) echo .exrc exists ./shutdown.sh -s jnp://localhost:1199 Shutdown message has been posted to the server. Server shutdown may take a while - check logfiles for completion Create a directory which contains the name of the new MC : herjbo02.esac.esa.int/home/hsc_phs> mkdir fileHolder_ops_MC_H21_P15_S20_PV copied HSpot files from the HSpot_files directory on hscphs2 to this directory TAKE NOTE : You should perform this copy from the HSpot files folder on hscphs2. - DONE : SEE BELOW hscphs2@heropl02/home/hscphs2/icchsc/HSpot_files/MC_H21_P16_S22_PV> scp *.prop hsc_phs@herjbo02:/home/hsc_phs/fileHolder_ops_MC_H21_P16_S22_PV/ Next update the properties file: herjbo02.esac.esa.int/home/hsc_phs/.hcss> emacs HCSS_PHS_TEST_herjbo02_0_6_6.props Update each of the fields below in the Properties file : TAKE NOTE : Double check that this is done correctly!! #MARK & CHARO TIME ESTIMATOR hcss.phs.timeEstimatorVersion=MARK-CHARO-USE-ONLY-MC_H21_P16_S22_PV_090818 #MARK & CHARO MISSION CONFIG hcss.ccm.mission.config = MC_H21_P16_S22_PV #MARK & CHARO DIRECTORIES hcss.phs.fileHolder=/home/hsc_phs/fileHolder_ops_MC_H21_P16_S22_PV Finally Restart the Test Jboss. > startJbossTest DONE. LOGOUT OF THE JBOSS MACHINE. YOU ARE FINISHED WITH THIS LOG FILE.